• Advances in nano research
• /
• 제9권3호
• /
• pp.157-172
• /
• 2020

The aim of this present research is the effect of the higher-order terms of the governing equation on the forced longitudinal vibration of a nanorod model and making comparisons of the results with classical nonlocal elasticity theory. For this purpose, the free axial vibration along with forced one under the two various linear and harmonic axial concentrated forces in zigzag Single-Walled Carbon Nanotube (SWCNT) are analyzed dynamically. Three various theories containing the classical theory, which is called Eringen's nonlocal elasticity, along with Rayleigh and Bishop theories (higher-order theories) are established to justify the nonlocal behavior of constitutive relations. The governing equation and the related boundary conditions are derived from Hamilton's principle. The assumed modes method is adopted to solve the equation of motion. For the free axial vibration, the natural frequencies are calculated for the various values of the nonlocal parameter only based on Eringen's theory. The effects of the nonlocal parameter, thickness, length, and ratio of the excitation frequency to the natural frequency over time in dimensional and non-dimensional axial displacements are investigated for the first time.

• Advances in nano research
• /
• 제6권2호
• /
• pp.183-200
• /
• 2018

In the present study silver nanoparticles (AgNPs) were successfully synthesized using aqueous extract of Sargassum muticum. The aqueous extract (10%) treated with 1 mM silver nitrate solution resulted in the formation of AgNPs and the surface plasmon resonance (SPR) of the formed AgNPs was recorded at 360 nm using UV-Visible spectrophotometer. The molecules involved in the formation of AgNPs were identified by Fourier transform infrared spectroscopy (FT-IR), surface morphology was studied by using scanning electron microscopy (SEM), SEM micrograph clearly revealed the size of the AgNPs was in the range of 40-65 nm with spherical, hexagonal in shape and poly-dispersed nature, and X-ray diffraction spectroscopy (XRD) was used to determine the crystalline structure. High positive Zeta potential (36.5 mV) of formed AgNPs indicates the stability and XRD pattern revealed the crystal structure of the AgNPs by showing the Bragg's peaks corresponding to (111), (200), (311) and (222) planes of face-centered cubic crystal phase of silver. The synthesized AgNPs exhibited effective anticancerous activity (at doses 25 and $50{\mu}g/ml$ of AgNPs) against Breast cancer cell line (MCF7).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.77.1-77.1
• /
• 2015

The Center for Advanced Meta-Materials (CAMM) was launched in 2014 as a center for Global Frontier Projects supported by the Ministry of Science, ICT and Future Planning. The center is geared towards developing core technologies in controlling wave energies by incorporating creative artificial structures of sub-wavelength sizes. Furthermore, the center not only investigates novel meta-materials and devices but also builds new design, fabrication and application platforms in order to realize these technologies. The center will create new markets in various industries such as national defense, housing and medical care. In order to accomplish its goals, CAMM is composed of three major divisions: the fabrication/characterization technologies and application division, the advanced metamaterials for electromagnetic wave division and the advanced metamaterials for mechanical wave division. The center will concentrate its efforts in bringing innovations to conventional technologies in sectors such as machinery, ICT, energy and biomedical technology by adopting the use of advanced metamaterial systems. In this talk, we will introduce principles of advanced wave control and describe some advanced metamaterials which can provide new solutions for various social problems in future.

• 디자인학연구
• /
• 제11권2호
• /
• pp.265-272
• /
• 1998

인터페이스 디자인(Interface Design)을 제작하는 디자이너는 그 정보를 사용자 입장에서 쉽고 빠르게 얻을 수 있게하는 기능성과 심미성을 적절히 조합하여 기능성이 강조된 진보적인 인포메이션 디자인(Inforrnation Design)을 하는 것이다. 그러므로 인터페이스 디자인 작업은 디자이너의 입장이 아닌 사용자 입장이어야 하며, 사용자의 'NEED'를 반영하고 충족시키는 정보전달을 최우선 하는 디자인이 되어야 할 것이다. 본 논문은 지금까지 정립되어있지 않은 인터페이스 디자인의 시각적인 화면(Screen Layout) 구성요소 중 필자가 선정한 10가지의 소재(Visual Elements)를, 디자이너의 입장에서 심미성을 치우쳐 시각적인 아름다움을 강조하여 자칫 인터페이스 디자인의 기본되는 기능성을 배제하는 오류를 범하는 상황을 조금이나마 축소할 수 있는 기능성을 찾아보려 한다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.124-130
• /
• 2012

An injection mold cooling circuit for an automotive front bumper was optimally designed in order to simultaneously minimize the average of the standard deviations of the temperature and the difference in mean temperatures of the upper and lower molds for uniform cooling. The temperature distribution for a specified design was evaluated by Moldflow Insight 2010, a commercial injection molding analysis tool. For efficient design, PIAnO (Process Integration, Automation and Optimization), a commercial PIDO tool, was used to integrate and automate injection molding analysis procedure. The weighted-sum method was used to handle the multi-objective optimization problem and PQRSM, a function-based sequential approximate optimizer equipped in PIAnO, to handle numerically noisy responses with respect to the variation of design variables. The optimal average of the standard deviations and difference in mean temperatures were found to be reduced by 9.2% and 56.52%, respectively, compared to the initial ones.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.38-43
• /
• 2005

Several nuclear power plants reported that they often found the combination cracks, which consist of longitudinal and circumferential cracks in the tubes. For the burst pressure of a tube with a single longitudinal or circumferential crack several experimental equations have been proposed in published literatures. But for the combination crack appropriate fracture criterion has not been proposed yet. In this study the burst pressures of a tube with a longitudinal crack or a T-type combination crack consisting of longitudinal and circumferential cracks were obtained experimentally and analytically. Fracture parameters such as crack opening angle (COA) were investigated by using elastic plastic analysis. Also the burst pressure far a T-type combination crack located near a tubesheet was considered to develop a length-based criterion. Because most of the axial, circumferential or combination cracks initiate in roll transition zone near the tubesheet.

• The Korean Journal of Physiology and Pharmacology
• /
• 제21권5호
• /
• pp.487-493
• /
• 2017

The anterior cingulate cortex (ACC) is known for its role in perception of nociceptive signals and the associated emotional responses. Recent optogenetic studies, involving modulation of neuronal activity in the ACC, show that the ACC can modulate mechanical hyperalgesia. In the present study, we used optogenetic techniques to selectively modulate excitatory pyramidal neurons and inhibitory interneurons in the ACC in a model of chronic inflammatory pain to assess their motivational effect in the conditioned place preference (CPP) test. Selective inhibition of pyramidal neurons induced preference during the CPP test, while activation of parvalbumin (PV)-specific neurons did not. Moreover, chemogenetic inhibition of the excitatory pyramidal neurons alleviated mechanical hyperalgesia, consistent with our previous result. Our results provide evidence for the analgesic effect of inhibition of ACC excitatory pyramidal neurons and a prospective treatment for chronic pain.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2445-2448
• /
• 2007

Self-assembled monolayers (SAMs) were formed by adsorption of thioacetyl-terminated tolanethioacetate (TTA) on Au(111) in a 0.5-mM ethanol solution after one day immersion at room temperature. Molecular-scale STM imaging revealed that the TTA SAMs were composed of two mixed phases; an ordered phase with small domains describing a ( × 2 )R30° structure and a disordered phase. Interestingly, after annealing the precovered TTA SAMs on Au(111) at 90 °C for 1 h, the small ordered domains grew unidirectionally, resulting in the formation of unique rod-like domains, which were assigned a ( × 2 )R7° structure. These results will be very useful in understanding the formation and thermal behavior of TTA SAMs on gold surfaces.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1601-1623
• /
• 2015

Electroactive polymers have attracted considerable attention in recent years due to their sensing and actuating properties which make them a material of choice for a wide range of applications including sensors, biomimetic robots, and biomedical micro devices. This paper presents an effective modeling strategy for nonlinear large deformation (small strains and moderate rotations) dynamic analysis of polymer actuators. Considering that the complicated electro-chemo-mechanical dynamics of these actuators is a drawback for their application in functional devices, establishing a mathematical model which can effectively predict the actuator's dynamic behavior can be of paramount importance. To effectively predict the actuator's dynamic behavior, a comprehensive mathematical model is proposed correlating the input voltage and the output bending displacement of polymer actuators. The proposed model, which is based on the rigid finite element (RFE) method, consists of two parts, namely electrical and mechanical models. The former is comprised of a ladder network of discrete resistive-capacitive components similar to the network used to model transmission lines, while the latter describes the actuator as a system of rigid links connected by spring-damping elements (sdes). Both electrical and mechanical components are validated through experimental results.

• 한국환경보건학회지
• /
• 제38권1호
• /
• pp.1-7
• /
• 2012

Carbon nanotubes (CNTs) stand at the frontier of nanotechnology and are destined to stimulate the next industrial revolution. Rapid increase in their production and use in the technology industry have led to concerns over the effects of CNT on human health and the environment. The prominent use of CNTs in biomedical applications also increases the possibility of human exposure, while properties such as their high aspect ratio (fiber-like shape) and large surface area raise safety concerns for human health if exposure does occur. It is crucial to develop viable alternatives to in vivo tests in order to evaluate the toxicity of engineered CNTs and develop validated experimental models capable of identifying CNTs' toxic effects and predicting their level of toxicity in the human respiratory system. Human lung epithelial cells serve as a barrier at the interface between the surrounding air and lung tissues in response to exogenous particles such as air-pollutants, including CNTs. Monolayer culture of the key individual cell types has provided abundant fundamental information on the response of these cells to external perturbations. However, such systems are limited by the absence of cell-cell interactions and their dynamic nature, which are both present in vivo. In this review, we suggested two viable alternatives to in vivo tests to evaluate the health risk of human exposure to CNTs.