• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.75-81
• /
• 2008

This paper dealt with the synthesis and characterization of the polymeric product by the reaction of the water-soluble poly(vinyl alcohol)[PVA] nonwoven fabrics and the phosphoryl chloride ($POCl_3$), which has been applied to prepare water-proofing materials or intermediates for increasing water-proofing or fire-proofing ability of commercially available water-soluble PVA support layer. $POCl_3$ was reacted with PVA nonwoven fabrics under non-aqueous condition, and their reactivity, and chemical structure were checked and discussed. PVA was reacted with $POCl_3$ under the reaction condition of 1:1, or 1:2 mole ratios at 70, 80 and $90^{\circ}C$, and the reaction products were further hydrolyzed. The structure of the resulting products from water soluble PVA nonwoven fabrics reacted with $POCl_3$ were identified by FT-IR or X-ray fluorescence spectrophotometer, and they indicated the PVA polymer chains to have phosphorous and chlorine moieties.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2020

In this study, lignin/chlorinated poly(vinyl chloride)(CPVC) blended fibers have been produced for the development of low-cost carbon fiber. Carbon fiber manufacturing was accomplished through stabilization and carbonization process. The lignin/CPVC blended fibers were prepared by wet spinning method. Dimethylacetamid e(DMAc) and cychlohexanone in a ratio of 5:1(wt%) was employed as co-solvent. The ratio of lignin/CPVC was prepared at 0/10, 1/9, 2/8, 3/7, 4/6, and 5/5(wt%). The spinning solution was extruded at a rate of 0.1 to 0.4ml/min according to the blending ratio. The speed of the rollers was the same for all ratios(draw ratio=1). Analysis of fiber cross-section by scanning eletron microscopy(SEM) showed that as the lignin ratio increased in the same coagulation bath and distilled water, the pore size of the spinning fiber decreased. Therefore, the highest tensile strength of the blending fibers was 6.3±1.2MPa at the 5/5 ratio. The carbon fiber also showed the best tensile strength of 120.78±2.43MPa at 5/5 ratio.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.336-344
• /
• 2011

Using the abundant available information about the tomato genome, we developed DNA markers that are linked to disease resistant loci and performed marker-assisted selection (MAS) to construct multi-disease resistant lines and varieties. Resistance markers of Ty-1, T2, and I2, which are linked to disease resistance to Tomato yellow leaf curl virus (TYLCV), Tomato mosaic virus (ToMV), and Fusarium wilt, respectively, were developed in a co-dominant fashion. DNA sequences near the resistance loci of TYLCV, ToMV, and Fusarium wilt were used for primer design. Reported candidate markers for powdery mildew-resistance were screened and the 32.5Cla marker was selected. All four markers (Ty-1, T2, I2, and 32.5Cla) were converted to cleavage amplification polymorphisms (CAPS) markers. Then, the CAPS markers were applied to 96 tomato lines to determine the phenetic relationships among the lines. This information yielded clusters of breeding lines illustrating the distribution of resistant and susceptible characters among lines. These data were utilized further in a MAS program for several generations, and a total of ten varieties and ten inbred lines were constructed. Among four traits, three were introduced to develop varieties and breeding lines through the MAS program; several cultivars possessed up to seven disease resistant traits. These resistant trait-related markers that were developed for the tomato MAS program could be used to select early stage seedlings, saving time and cost, and to construct multi-disease resistant lines and varieties.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.39 no.2
• /
• pp.74-81
• /
• 2019

Freeze-dried 3^rd day of 5^th instar silkworm powder (FDSP) has been produced and consumed as functional food ingredient in Korea. Generally, FDSP is distributed in the dehumidification state. In this study, the effect of humid condition (30%, 50%, 70%, and 90% RH) on the quality characteristics of FDSP was examined. The color of FDSP, greenish yellow, becomes dark with the change of redness and yellowness. When FDSP is exposed for 4 h at 90% RH, the lightness was changed from 56 to 51, redness from -0.8 to 3.7, and yellowness from 26.5 to 21.6. The proximate composition of FDSP was not significantly changed except 90% RH condition. At that condition, moisture content (5.7%) was increased to 26.8% and crude fat (11.3%) decreased to 1.9% (3 wk 90% RH). Mineral content change during storage can be classified to 3 types; sulfur rapidly decreased, potassium mostly stable with some decreased with humidity, and sodium increased with high humid condition. Vitamins were not significantly affected. However, DNJ was abruptly decreased to 0.03 g/100g in humid condition.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.226-236
• /
• 2010

UV irradiated acrylic pressure sensitive adhesives(PSAs) are prepared to be used for thermal pad in plasma display panel(PDP). The effect of the chemical structure of side-chain in comonomer and of crosslinking agent on wet-out property of acrylic PSAs in wide temperature range were investigated. The correlationship between viscoelastic behavior and adhesion properties, such as tack and peel strength, was also studied. The experimental results supported that wet-out and adhesion properties of acrylic PSAs were enhanced inversely proportional to side-chain length of comonomer in wide temperature range. The peel energy clearly increased in acrylic PSAs prepared by using di(ethylene glycol) dimethylacrylate (DEGDMA) for crosslinking agent. The results might be due to the difference in the glass transition temperature and viscoelastic behavior of acrylic PSAs.

• Journal of the Korean Home Economics Association
• /
• v.47 no.9
• /
• pp.15-26
• /
• 2009

The main purpose of this study was to speculate how psychological state of adolescent students has changed their school uniform style. For the study, the distinctive characteristics during adolescence stage were theoretically examined. Through the examination, this study found four interests in fashions and school uniforms. For the purpose, this study conducted interviews with grade 2 students in a total of six coeducation secondary schools in Seoul, Gyeongki and Gwangju using a questionnaire. The survey period ranged from December 15 2008 to December 24 2008 and a total of 1196 were used for a final analysis. This study extracted factors as Principal Components Analysis and used Varimax for orthogonal rotation analysis. To measure confidence, it used Cronbach's a test to item internal consistency. For data analysis, it used SPSS WIN 12.0 and for hypothesis analysis, frequency analysis, cross analysis, independent t-test, and one-way ANOVA were conducted. For posterior analysis, it used Sheffe test. The results are as follows: First, the interests in fashion and school uniforms differed depending on their own tastes, but these interests were more influenced by environment around school. Secondly, the boy subjects were more aggressive towards repairs their uniforms than the girls, which suggested that boys had stronger desire to show themselves to others and more satisfaction from repairs their uniforms than the girls. Based on the results, this study concluded as follows: We should pay attention to preventing deformation in original design of school uniforms while expanding options to have variable designs or to change detailed part of design. So, there will be no additional uniform mending expense and financial loss to parents, and students will be more satisfied with their school uniforms.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.138-152
• /
• 2010

This study investigates the actual hospital-clothes consumption experience of consumers according to gender and age. An all age survey was conducted among male and female ex-patients in Korea nationally. From data collected during April and May 2009, a total of 513 responses were analyzed using descriptive statistics, chi-square analysis, two-way ANOVA, and MANOVA using SPSS 10.1.4. The results are as follows. The hospitalization ratio was higher in the male group than in the female group and increased with age. Many hospitalizations were taken to the department of orthopedics, internal treatment, obstetrics and gynecology, and surgery. The satisfaction with patient gowns was low regarding size, fabric touch, color and pattern, Psychological comfort, and holistic satisfaction, Specifically, the stiffness of the fabric, cheerless colors, and the limited number of sizes were the main complaints; size dissatisfaction was expressed strongly by females. About 35% of respondents showed a positive attitude to wear premium patient gowns. Various medical supplies were used and different items were utilized according to gender and age of patients. Uncomfortableness of medical supplies were highly related to laundry and fabric touch.

• The KIPS Transactions:PartA
• /
• v.12A no.3 s.93
• /
• pp.223-228
• /
• 2005

Several researchers have pointed out that the energy consumption in memory takes a dominant fraction on the energy budget of a whole embedded system. This applies to the embedded Java virtual machine tn, and to develop a more energy-efficient JVM it is absolutely necessary to optimize the energy usage in Jana memory. In this paper we have analyzed the logical memory access pattern in JVM as it executes numerous number of bytecode instructions while running a Java program. The access pattern gives us an insight how to design and select a suitable memory technology for Java memory. We present the memory access pattern for the three logical data spaces of JVM: heap, operand stack, and local variable array. The result saws that operand stack is accessed most frequently and uniformly, whereas heap used least frequently and non-uniformly among the three. Both heap and local variable array are accessed mostly in read-only fashion, but no remarkable difference is found between read and write operations for operand stack usage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.7-10
• /
• 2001

Recently, most jewelry design employ multiple prongs that grasp the front surface of the jewel to the metal frame To keep up with recent trends in fashion. jewelry manufacturers need to produce single-prong neckalces and earings constructed with non-precious metals. In responce to this demand, Ameth Development Division and The University of Seoul researched jointly and developed a technique for setting the jewel safely using a single prong with less weight. The setting process consists of making a small trench through the jewel at the mounting point and using a low melting point tin solder, to fill the trench and bonding with the prong. The application or this technology in the setting of a natural amethyst to a single 18K gold prong resulted in a 40% reduction in cost and weight and improvement of feeling for wearing.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.233-243
• /
• 2010

Thanks to the rapid advance of modern technology in industrial society, economic and material abundances have not only caused a variety of cultural industry to develop but also brought about the development of beauty treatment industry. Like this, the industry has continually expanded into the public rapidly by forming a new beauty trend along with the growth of mass media such as T.V, advertisement, vogue magazine, and film. And make-up is also broadening its artistic areas by utilizing various expression skills and consistently changing with beauty trends, which has influences on Make-up Illustration. As a result, it has been recognized as a new conception of 'art' expanding in interpretation of communicating with the masses under condition of modern culture and stressed in its part more and more. It is expected that Make-up Illustration playing an important role in the exchange of fashion trend information between beauty treatment industry and people will be studied in different-image-expression ways to raise its artistic value and be a useful material for research and creation activities in the foreseeable future by Make-up Illustration made of computer graphics.