• Clean Technology
• /
• v.16 no.4
• /
• pp.239-244
• /
• 2010

The carboxylation of the fluorenyl epoxide with a spiro framework, 9,9'-Bis(4-oxiranylmethoxyphenyl) fluorine (2) was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts to produce the corresponding five-membered cyclic carbonate (3) in an efficient and environmentally benign fashion. The coupling reactions depend greatly on the kind of the halide anions and alkyl chain length of the onium salts. While the reaction was sensitive to the reaction temperature, the reaction trends suggest that the catalytic efficiency of the quaternary ammonium halides may correlate strongly with the melting points of the halides. The reactions using a catalytic amount (2 mol %) of quaternary ammonium bromide with an n-butyl chain at 75.9 bar of $CO_2$ and 393 K give the highest yield of the cyclic carbonate (92%).

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.2
• /
• pp.294-302
• /
• 2022

This study attempted to investigate the effect of improving damaged hair by preparing a hair improving agent with basil oil and applying it to damaged hair. An experimental material was added to a perm base agent containing 0 g, 3 g, 6 g, 9 g of basil oil to prepare the preparation. It was applied to sample hair bleached at 8 levels with the prepared formulation. Each sample and damaged hair were measured and analyzed. The measurement method measured tensile strength, absorbance and gloss using methylene blue to determine the effect of improving maternal quality. Statistical analysis was conducted on the reliability of the study results. Studies have shown that all samples with basil oil have higher tensile strength than damaged hair. As a result of the absorbance analysis using methylene blue, it was found that the absorbance was lower than that of damaged hair in all samples. Gloss measurement showed that all samples showed increased luster compared to damaged hair. In conclusion, basil oil was found to improve damaged hair. In the future, research on various types of oil and research methods is needed.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.717-726
• /
• 2023

This study collected basic data for the design of and research and development for golf wear with an eye toward various consumer needs such as design, activity, function, comfort, and durability as requirements for golf wear. 64 men and women in their 40s, 50s, and 60s were surveyed on the state of wearing golf wear and their satisfaction of the garments. As a result, it was confirmed that the quality of golf wear participants currently possessed did not sufficiently satisfy the research group consumers. Therefore, research and development of golf wear for these consumers should be advanced, while considering reasonable price, age-appropriate design, pattern development, and material selection with keeping in mind the intended activity level as well as comfort. It was thought that the development of functional golf wear would contribute to more comfortable golf activities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.2
• /
• pp.311-326
• /
• 2024

The rapid development of neural network technology promotes the neural network model driven by big data to overcome the texture effect of complex objects. Due to the limitations in complex scenes, it is necessary to establish custom template matching and apply it to the research of many fields of computational vision technology. The dependence on high-quality small label sample database data is not very strong, and the machine learning system of deep feature connection to complete the task of texture effect inference and speculation is relatively poor. The style transfer algorithm based on neural network collects and preserves the data of patterns, extracts and modernizes their features. Through the algorithm model, it is easier to present the texture color of patterns and display them digitally. In this paper, according to the texture effect reasoning of custom template matching, the 3D visualization of the target is transformed into a 3D model. The high similarity between the scene to be inferred and the user-defined template is calculated by the user-defined template of the multi-dimensional external feature label. The convolutional neural network is adopted to optimize the external area of the object to improve the sampling quality and computational performance of the sample pyramid structure. The results indicate that the proposed algorithm can accurately capture the significant target, achieve more ablation noise, and improve the visualization results. The proposed deep convolutional neural network optimization algorithm has good rapidity, data accuracy and robustness. The proposed algorithm can adapt to the calculation of more task scenes, display the redundant vision-related information of image conversion, enhance the powerful computing power, and further improve the computational efficiency and accuracy of convolutional networks, which has a high research significance for the study of image information conversion.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.36-45
• /
• 2024

This study was to investigate the effect of manufacturing an avocado oil-added formulation and applying it to damaged hair. The experimental materials were prepared by adding avocado oil contents of 0 g, 3 g, 6 g, and 9 g to the perm base agent. It was applied to 4 damaged hair samples with the prepared formulation for comparative analysis. Tensile strength, absorbance using methylene blue, and gloss were measured as measurement methods for the effect on damaged hair. Statistical analysis was performed for the reliability of the research results. As a result of the tensile strength measurement, it was found that the tensile strength of the sample applied with the formulation containing 6 g and 9 g to the sample increased, affecting damaged hair. As a result of the absorbance analysis using methylene blue, it was found that the absorbance of all samples applied by adding oil decreased, affecting damaged hair. The gloss measurement result was found to affect damaged hair when 6 g and 9 g were added. The conclusion is that avocado oil affects damaged hair, so it is thought that it will have an effect of improving hair.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.253-259
• /
• 2024

From the consumer's perspective, eco-friendly consumption is still a topic that can cause various psychological discomforts, and psychological discomfort can lower the intention to consume eco-friendly products through negative consumer psychological mechanisms. This study analyzed the influence of psychological discomfort regarding eco-friendly consumption on people's willingness to pay additional prices for eco-friendly products. In addition, we examined the moderating effect of consumers' involvement in the product family in this relationship. As a result of a statistical analysis based on consumer response data obtained from an online survey conducted with 407 American consumers, the level of people's psychological discomfort with eco-friendly consumption is directly related to their willingness to pay additional prices for eco-friendly products. Although it did not have a significant effect, it was confirmed that the influence of psychological discomfort on willingness to pay premium price was significantly different depending on the consumer's level of involvement.

• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.515-521
• /
• 2009

The DEFT (direct epifluorescent filter technique)/APC (aerobic plate count) test was utilized to screen powdered Ramen soup samples (RS-1, RS-2) whether or not they have been microbial-decontaminated. The initial microbial loads of commercially-packaged samples were log DEFT 6.46 (RS-1) and 7.05 (RS-2), but the viable bacterial counts were log APC 2.74 (RS-1) and 1.95 (RS-2), respectively; this finding showed that they have been already decontaminated by methods other than irradiation. The same samples were then subjected to gamma irradiation at 0, 5 and 10 kGy in order to evaluate the microbial and physicochemical changes during post-irradiation storage for 6 months under room conditions ($10{\pm}3^{\circ}C$). The DEFT count was constant in irradiated samples even at different doses, but APC decreased with dose increases; this implies that the log DEFT/APC increased in a linear fashion with dose. No coliforms, yeasts and molds were detected in any of the samples, whereas the initially detected aerobic bacteria ($5.49{\times}10^2CFU/g$) were inactivated by 5 kGy or more and no growth was observed during the subsequent storage period. The pH of RS-1 was reduced by irradiation (p<0.01), but increased (p<0.01) with increasing storage time. Irradiation induced a reduction in volatile basic nitrogen (VBN), whereas an increase in thiobarbituric acid (TBA) values was observed. The storage time proved more influential than irradiation up to 10 kGy in terms of changes in the VBN and Hunter’s color values of powdered Ramen soups.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.935-939
• /
• 2018

3D Printing technology is developing in various prototypes for medical treatment, food, fashion as well as machinery and equipment parts production. 3D printing technology is also able to fully be utilized to other industries in terms of developing its technology which has been reported in many field of areas. 3D printing technology is expected to be used in various applications related to $4^{th}$ industrial revolution such as finished products and parts even it is still carried out in the prototype model. In this study, we have investigated and developed conductive resin for 3d printing application based on reduced graphene oxide(rGO)/Polypyrrole(Ppy) composite and polycaprolactone(PCL) as a biodegradable polymer. The electrical properties and surface morphology of the conductive PCL resin based on therGO/Ppy composite were analyzed by 4point-probe and scanning electron microscope(SEM). The conductive PCL resin based on rGO/Ppy composite is expected to be applicable not only 3D printing, but also electronic materials in other industrial fields.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.1-7
• /
• 1999

We developed Fabrication process of embedded passive components in MCM-D substrate. The proposed MCM-D substrate is based on Cu/photosensitive BCB multilayer. The substrate used is Si wafer and Ti/cu metallization is used to form the interconnect layer. Interconnect layers are formed with 1000$\AA$ Ti/3000$\AA$ Cu by sputtering method and 3$\mu\textrm{m}$ Cu by electrical plating method. In order to form the vias in photosensitive BCB layer, the process of BCB and plasma etch using $C_2F_6$ gas were evaluated. The MCM-D substrate is composed of 5 dielectric layers and 4 interconnect layers. Embedded resistors are made with NiCr and implemented on the $2^{nd}$ dielectric layer. The sheet resistance of NiCr is controlled to be about 21 $\Omega$/sq at the thickness of 600$\AA$. The multi-turn sprial inductors are designed in coplanar fashion on the $4^{th}$ interconnect layer with an underpass from the center to outside using the lower $3^{rd}$ interconnect layer. Capacitors are designed and realized between $1^{st}$ interconnect layer and $2^{nd}$ interconnect layer. An important issue in capacitor is the accurate determination of the dielectric thickness. We use the 900$\AA$ thickness of PECVD silicon nitride film as dielectric. Capacitance per unit area is about 88nF/$\textrm {cm}^2$at the thickness of 900$\AA$. The advantage of this integration process is the compatibility with the conventional semiconductor process due to low temperature PECVD silicon nitride process and thermal evaporation NiCr process.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.206-212
• /
• 1998

This study was undertaken to explore the applicability of glutathione S-transferase (GST) activity as a predictable indicator to monitor chemical pollution in shells and fishes utilized for food. There were some variations in the basal level of GST activity depending on species tested. Ark shells, Anadara satowi, showed the highest normal enzyme activity, followed by catfish and marine mussels, Mytilus coruscus. White clams, Meretrix lusoria, Israeli carp and catfish had lower activity. When A. satowi was exposed to 3-methyl-cholanthrene (3-MC), a prototypic polycyclic aromatic hydrocarbon for 1 week, GST activity decreased by about 30%. This reduction in GST activity induced by 3-MC did not recover until two weeks after the cessation of exposure. GST activity increased in response to 3-MC in most of the other species studied. The GST elevation in M. coruscus attained its maxinum of about 200% at the termination of 3-MC exposure maintaining this level up to 2 weeks, and declined gradually thereafter. 3-MC also induced GST activity in lsraeli carp in a similar fashion to M. coruscus. Phenobarbital induced GST activity both in M. coruscus and lsraeil carp. Other chemicals. such as clofibrate, butylated hydroxyanisole. hexachlorobenzene, and oxolinic acid did not change the enzyme activity significantly in most speciel. Phenol depressed GST activity only in lsraeli carp. These results suggest that the basal level of GST activity is somewhat variable and that the direction of change in response to chemicals seems to be related to its normal activity. The change in enzyme activity can be a preditable indicator of some environmental chemicals such as PAHs and phenol.