• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.709-715
• /
• 2015

As consumers interest in microgreens is increasing worldwide, the production of leafy microgreens uisng different LED lights was investigated in this study. The experiment was carried out to evaluate the effects of different LED lights on the composition and vitamin C contents of buckwheat microgreens. Physicochemical properties of buckwheat microgreens grown under different lights (red, blue, and white) and control exposed to a dark room were investigated. Moisture contents of buckwheat microgreens were 95.65% under white light (WL), 95.75% under blue light (BL), 90.77% under red light (RL), and 89.71% under dark room (DR). Crude ash contents of buckwheat microgreens grown under WL, DR, RL, and BL were 0.39%, 0.39%, 0.31%, and 0.37%, respectively. Crude protein contents of buckwheat microgreens grown under DR, RL, WL, and BL were 7.12%, 7.81%, 1.60%, and 2.40%, respectively. Crude fat contents of buckwheat microgreens grown under DR, BL, RL, and WL were 1.12%, 0.54%, 0.35%, and 0.22%, respectively. $^{\circ}Brix$ was the highest in microgreens grown under BL and RL and the lowest in buds grown under DR. Vitamin C content was the highest in buds grown under WL and the lowest in buds grown under BL. Total chlorophyll content was the highest in microgreens grown under RL and the lowest in buds grown under WL. For mineral content measurement of buckwheat microgreens, Ca, K, Mg, and P contents were high whereas B, Cu, and Zn contents were not detected. The mineral contents of buckwheat microgreens according to each color of light showed significant differences. These results demonstrated that treatment of different colored LED lights during cultivation was able to increase vitamin C content up to affecting the nutritional value of buckwheat microgreens.

• Journal of Veterinary Clinics
• /
• v.32 no.2
• /
• pp.141-147
• /
• 2015

Based on the results of previous studies, endoscopic biopsy sample's quality has a major impact on its adequacy for histopathology, and that the nature of the biopsy forceps can influence the specimen quality. The present study compared the effects of three different types of endoscopic biopsy forceps and two different operators on sample quality and adequacy for histopathology in three healthy cats. Every biopsy was performed between the major papilla and caudal duodenal flexure, and each operator performed five biopsies with each type of forceps on each cat, for a total of 90 biopsies. One pathologist evaluated the quality and adequacy of the obtained samples. Biopsies performed with large-cup forceps provided heavier and longer samples than the standard round forceps. With the same size forceps, the presence of alligator teeth had no effect on sample quality or adequacy for histopathological examination and assessment. Based on the results of the present study, although the standard round forceps could be used to obtain adequate samples for histopathology, large-cup forceps such as the standard oval and alligator jaw type have the advantage of obtaining high quality endoscopic samples.

• Journal of Hospice and Palliative Care
• /
• v.18 no.4
• /
• pp.314-321
• /
• 2015

Purpose: It is well known that a terminal cancer condition affects not only patient themselves but their family members because the patients experience a variety of symptoms. This study was aimed to investigate modifiable factors that influence family caregivers' quality of life, depression, and anxiety. Methods: From January 2015 through May 2015, a survey was conducted with 61 family caregivers of hospice patients who were hospitalized in two university hospitals and one municipal hospital in Busan. The questionnaire was consisted of characteristics of family caregivers and patients, the Korean version of the Caregiver Quality of Life Index-Cancer (CQOLC-K), Beck's Depression Inventory II (BDI-II), Beck's Anxiety Inventory (BAI), and patient's symptom controlling scores rated by family caregivers. Results: Family caregivers' depression was associated with religion. Quality of life and depression of family caregivers were also influenced by monthly household income. Patient age was inversely related to family caregiver's quality of life ($r_s=-0.259$, P=0.043). Family caregivers' quality of life was associated with patient's anxiety (r=0.443, P=0.001). Family caregivers' depression was affected by patient's constipation (r=0.276, P=0.046), anxiety (r=0.508, P<0.001), and daytime drowsiness (r=0.377, P=0.005). And family caregivers' anxiety was influenced by patients' sleep disturbance (r=0.276, P=0.046), depression (r=0.297, P=0.031), and anxiety (r=0.357, P=0.009). Conclusion: According to our findings, family caregivers had higher quality of life and less depression and anxiety when symptoms in hospice patients were well controlled.

• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.241-267
• /
• 2017

Since the liberation in 1945, Korean specialists in the field of geological science and mineral resources engineering have developed two disciplines through the cooperation and competition with each other. Specialists both in the geophysics and in the geophysical exploration, who share much, have developed their own fields deeper and broader. Since the late 1990s, specialists in both fields felt the need for an independent society to deal with their fields and discussed the establishment of such a society. In 1997, they discussed to establish a unified society which integrates both fields instead of separated societies. However, in 1998, the Korean Geophysical Society and the Korean Society of Exploration Geophysicists were separately established due to some practical problems. During 7 ~ 8 years since the establishment of the two societies, many members of the two societies intended that the two societies should integrate into a single comprehensive society based on the facts that many fields of each society are overlapped and naturally many members of one society are the members of the other society. The leaders of the two societies accepted these opinions also and began to discuss thoroughly the integration from 2005. Eventually, in 2007, the two societies successfully integrated and established the Korean Society of Earth and Exploration Geophysicists. The Korean Society of Earth and Exploration Geophysicists continues to cooperate and compete with other societies of geological science and mineral resources engineering in Korea and in circumpacific area including Asia, Oceania and Americas, contributing to the development of geophysics and geophysical exploration.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.437-442
• /
• 2015

In a continuing screening of selected medicinal plants native to South Korea, the antioxidant and pancreatic lipase inhibitory activities of an aqueous methanolic extract from the heartwood of Aquilaria agallocha were investigated. Eighty percent of the methanolic extract of A. agallocha was further divided into $CH_2Cl_2$, EtOAc and n-BuOH in order to yield four solvent-soluble portions, namely $CH_2Cl_2$-soluble, EtOAc-soluble, n-BuOH-soluble and $H_2O$ residue. The antioxidant properties were evaluated by employing radical scavenging assays using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) ($ABTS^+$) radicals, while the anti-obesity efficacy of A. agallocha extracts and solvent-soluble portions were tested by porcine pancreatic lipase assay. All tested samples showed dose-dependent radical scavenging and pancreatic lipase inhibitory activities. Among the tested extracts and solvent-soluble portions, the $CH_2Cl_2$-soluble portion showed much higher radical scavenging activity and pancreatic lipase inhibitory properties when compared with other solvent-soluble portions. This result suggested that there was a significant relationship between the total phenolic content and biological efficacies, and A. agallocha extract might be considered as a new potential source of natural antioxidants and as a pancreatic lipase inhibitory source. A more systematic investigation of this biomass will be performed for further investigation of activity against antioxidative and anti-obesity effects.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.39-44
• /
• 2020

Recently, numerous researches are being conducted in flexible substrate to apply to wearable devices. Particularly, Conductive substrate researches that can implement the wearable devices on clothing are massive. In this study, we formed fiber substrate spraying CNT and Pd mixed solution on it and plated metal layer with electroless plating. Used SEM equipment and EDS analysis to analysis structure of the plated fiber substrate and discovered Ni layer was created. For check electrical properties, mapping was performed to check surface resistance and distribution of resistance of electroless plated fiber substrate with 4-point probe. It was confirmed that conductivity was improved as the duration of electroless plating was increased, and it was found that distribution of resistance by surface location was uniform. Changes in resistance due to mechanical stress were measured through tensile, bending, and twisting tests. As a result, it was confirmed that resistance change of flexible substrate gradually disappeared as plating time increased. Using UTM (Universal testing machine), it was analyzed mechanical properties of the electroless plated substrate with respect to changes in plating time were improved. In the case of conductive fiber substrate in which electroless plating was performed for 2 hours, tensile strength was increased by 16 MPa than fiber substrate. Based on these results, we found that Ni-CNT-Fabric flexible substrate is adequate for clothing-intergrated conductive substrate and we positively expect that this experiment shows flexible substrate can adapt to and develop not only a wearable device technology but also other fields needing flexibility such as battery, catalyst and solar cell.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.1-13
• /
• 2015

As opinion mining in big data applications has been highlighted, a lot of research on unstructured data has made. Lots of social media on the Internet generate unstructured or semi-structured data every second and they are often made by natural or human languages we use in daily life. Many words in human languages have multiple meanings or senses. In this result, it is very difficult for computers to extract useful information from these datasets. Traditional web search engines are usually based on keyword search, resulting in incorrect search results which are far from users' intentions. Even though a lot of progress in enhancing the performance of search engines has made over the last years in order to provide users with appropriate results, there is still so much to improve it. Word sense disambiguation can play a very important role in dealing with natural language processing and is considered as one of the most difficult problems in this area. Major approaches to word sense disambiguation can be classified as knowledge-base, supervised corpus-based, and unsupervised corpus-based approaches. This paper presents a method which automatically generates a corpus for word sense disambiguation by taking advantage of examples in existing dictionaries and avoids expensive sense tagging processes. It experiments the effectiveness of the method based on Naïve Bayes Model, which is one of supervised learning algorithms, by using Korean standard unabridged dictionary and Sejong Corpus. Korean standard unabridged dictionary has approximately 57,000 sentences. Sejong Corpus has about 790,000 sentences tagged with part-of-speech and senses all together. For the experiment of this study, Korean standard unabridged dictionary and Sejong Corpus were experimented as a combination and separate entities using cross validation. Only nouns, target subjects in word sense disambiguation, were selected. 93,522 word senses among 265,655 nouns and 56,914 sentences from related proverbs and examples were additionally combined in the corpus. Sejong Corpus was easily merged with Korean standard unabridged dictionary because Sejong Corpus was tagged based on sense indices defined by Korean standard unabridged dictionary. Sense vectors were formed after the merged corpus was created. Terms used in creating sense vectors were added in the named entity dictionary of Korean morphological analyzer. By using the extended named entity dictionary, term vectors were extracted from the input sentences and then term vectors for the sentences were created. Given the extracted term vector and the sense vector model made during the pre-processing stage, the sense-tagged terms were determined by the vector space model based word sense disambiguation. In addition, this study shows the effectiveness of merged corpus from examples in Korean standard unabridged dictionary and Sejong Corpus. The experiment shows the better results in precision and recall are found with the merged corpus. This study suggests it can practically enhance the performance of internet search engines and help us to understand more accurate meaning of a sentence in natural language processing pertinent to search engines, opinion mining, and text mining. Naïve Bayes classifier used in this study represents a supervised learning algorithm and uses Bayes theorem. Naïve Bayes classifier has an assumption that all senses are independent. Even though the assumption of Naïve Bayes classifier is not realistic and ignores the correlation between attributes, Naïve Bayes classifier is widely used because of its simplicity and in practice it is known to be very effective in many applications such as text classification and medical diagnosis. However, further research need to be carried out to consider all possible combinations and/or partial combinations of all senses in a sentence. Also, the effectiveness of word sense disambiguation may be improved if rhetorical structures or morphological dependencies between words are analyzed through syntactic analysis.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.633-638
• /
• 2017

The amount of radioactive waste has been rapidly increased with development of radiation treatment in medical field. Recently, it has been a common practice to use I-131 for thyroid cancer, F-18 for PET/CT and Tc-99m for diagnosis of nuclear medicine. All the wastes concerned have been disposed of by means of the self-disposal method, for example incineration, after storage enough to decay less than clearance level. IAEA proposed criteria for clearance level of waste which depends on the individual ($10{\mu}Sv/y$) and collective dose (1 man-Sv/y), and concentration of each nuclide (IAEA Safety Series No 111-P-1.1, 1992 and IAEA RS-G-1.7, 2004). In this study, specific radioactivity of radioactive waste contaminated with Re-186 was measured to confirm whether it meets the clearance level. Re-186 has long half life of 3.8 days relatively and emits beta and gamma radiation, therefore it can be applied in treatment and imaging purposes. The specific radioactivity of contaminated gloves weared by radiation workers was measured by MCA(Multi-channel Analyzer) which was calibrated by reference materials in accordance with the measuring procedure. As a result, comparison evaluation of decay storage period between the half-life which was calculated by attenuation curve based on real measurement and physical half-life was considered, and it is showed that the physical half-life is longer than induced half-life. Therefore, the storage period of radioactive waste for self-disposal may be curtailed in case of application of induced half-life. The result of this study will be proposed as ISO standard.