• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.2
• /
• pp.65-74
• /
• 2017

Supercritical carbon dioxide power system is the next generation electricity technology expected to be highly developed. The power system can improve net efficiency, simplify cycle configuration, and downsize equipment compared to conventional steam power system. In order to dominate the new market in advance, it is required to found Front End Engineering Design (FEED) Framework of the system. Therefore, this study developed the FEED framework including design processes for the supercritical carbon dioxide power system, information elements for each process, and relationships for each element. The developed FEED framework is expected to be able to secure systematic technological capabilities by establishing a common understanding and perspective among multi-field engineers participating in the design.

• Asia pacific journal of information systems
• /
• v.6 no.2
• /
• pp.107-124
• /
• 1996

This research studied future directions of Internet technology toward supporting group decision making. From the previous research, this study classified requirements of group decision support systems into three categories which are information transfer, information provision, and communication control. For each of the category, this study analyzed the limits of current Internet functions. Next, this research discussed technological solutions, for each of the OSI 7 layers, toward supporting group decision making. Additional functions in Internet which are required for group supporting are tracing communications, application dependent coding, selection of communication modes, and security handling. For high speed data communication in Internet, this research discussed the potential of cell-switching technology for the lower level link in Internet. The conclusions of this research can be used for designing future group decision support systems and development of Internet.

• Journal of Power Electronics
• /
• v.4 no.3
• /
• pp.188-196
• /
• 2004

The dielectric barrier discharge is recognized as one of the efficient methods of ultraviolet light generation and ozone production. As well, it is widely utilized for gaseous wastes neutralization and other technological processes in industry. This electrochemical reaction is electrically equivalent to a nonlinear capacitive load that represents some difficulties for designing the power supply. Therefore, a conventional power supply is designed for a drastically simplified model of the load and generally is not optimal. This paper presents a fast simulation approach for the nonlinear capacitive model representation of the dielectric barrier discharge load lamp. The main idea of the proposed method is to use analytical solutions of the differential state equations for the load and find the unknown initial conditions for the steady state by an optimization method. The derived expressions for the analytical solutions are rather complicated, however they greatly reduce the calculation time, which make sense when a deeper analysis is performed. This paper introduces the proposed simulation method and gives some examples of its application such as estimation of the load equivalent parameters and load matching conditions.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.254-258
• /
• 2006

Decrease of children caused by economic growth, scientific and technological advancement, long life, spread of nuclear families, increase of women's entry in public affairs, etc. in modern society has given rise to aging societies as another social problem. This has resulted in the advent of problems of the aged and necessity of geriatric hospitals specializing in providing medical services for the old. Even though the geriatric hospitals currently operated are mainly used by aged persons, however, their color environment has been decided, for the most pin, not in view of characteristics of the old but in view of supporting families' criteria for selection of facilities. This study intends to help geriatric hospital designers recognize importance of color environment considering characteristics of the old and select the relevant colors In designing geriatric hospitals in future to elevate remedial value and prevent accidents in space use. To this end, this study suggests problems of color environment found in surveys of the existing geriatric hospitals currently operated throughout the nation and further make some proposals for improvement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.60-66
• /
• 2011

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.55-64
• /
• 2017

The paper concerns concrete carbonation, the phenomena that occurs in every type of climate, especially in urban-industrial areas. In European Standards, including Eurocode (EC) for concrete structures the demanded durability of construction located in the conditions of the carbonation threat is mainly assured by the selection of suitable thickness of reinforcement cover. According to EC0 and EC2, the thickness of the cover in the particular class of exposure depends on the structural class/category and concrete compressive strength class which is determined by cement content and water-cement ratio (thus the quantitative composition) but it is not differentiated for various cements, nor additives (i.e., qualitative composition), nor technological types of concrete. As a consequence the selected thickness of concrete cover is in fact a far estimation - sometimes too exaggerated (too safe or too risky). The paper presents the elaborated "self-terminated carbonation model" that includes abovementioned factors and enables to indicate the maximal possible depth of carbonation. This is possible because presented model is a hyperbolic function of carbonation depth in time (the other models published in the literature use the parabolic function that theoretically assume the infinite increase of carbonation depth value). The paper discusses the presented model in comparison to other models published in the literature, moreover it contains the algorithm of concrete cover design with use of the model as well as an example of calculation of the cover thickness.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.89-115
• /
• 2009

A Technology Roadmap (TRM) is extensively used as a tool to manage activities of researching and developing technologies and products that can help a business achieve its goals. However, most of past studies on TRMs have limited themselves to developing in a single product or a single industry level. Few research studies have examined how TRM are used for convergence products and services for future development. The aim of this chapter is to introduce a TRM development methodology for u-City technologies and to consider its possible application at the R&D program level in Korea. This research suggests ways to develop a TRM in u-City development by segmenting u-City technologies, projecting TRM for each technology and designing TRM templates for evaluating both current and future technologies. In addition, the study further highlights to prioritize which technology is favorable for the implementation based on its economic feasibility and technological maturity.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.152-157
• /
• 2002

Optimal design of the long tunnels with large cross sections essential for the effective development of the limited land in Korea becomes more and more difficult owing to the constantly changing social, economic, environmental and technological factors. Deficiency of the domestic research works till now on the elementary topics on tunnel ventilation retards progress on developing the key technologies urgently required for designing and managing the long and large tunnels. This paper aims at identifying the subjects on which research must be carried out for the construction and management of vehicle tunnels in Korea by means of scrutinizing the contents of the publications since 1991 at the International Symposium on Aerodynamic and Ventilation of Vehicle Tunnels, the only international conference on the tunnel ventilation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1524-1534
• /
• 2009

In recent, diagnosing and monitoring technology via in vivo information has been evolved rapidly in worldwide with such capsule-kinds means of incorporating an RFID tag as wireless communication tool. Thus circumstance is pressing local body in Korea to research and develop ingestible RFID capsule which has more miniaturized form, less low power, harmless. This paper focused to investigate new technology and patents, R&D information for adopting proper frequency and designing wireless ingestible capsule antenna system, and suggested practical assignments to implement local R&D. Descriptions are consist of introduction, technology outline, tendency for R&D, patent, market, conclusion and suggestion.

• Steel and Composite Structures
• /
• v.7 no.1
• /
• pp.53-70
• /
• 2007

This paper presents a analysis of the problem of optimal design of the beams with two I-type cross section shapes. These types of beams are simply supported and subject to pure bending. The strength and stability conditions were formulated and analytically solved in the form of mathematical equations. Both global and selected types of local stability forms were taken into account. The optimization problem was defined as bicriteria. The cross section area of the beam is the first objective function, while the deflection of the beam is the second. The geometric parameters of cross section were selected as the design variables. The set of constraints includes global and local stability conditions, the strength condition, and technological and constructional requirements in the form of geometric relations. The optimization problem was formulated and solved with the help of the Pareto concept of optimality. During the numerical calculations a set of optimal compromise solutions was generated. The numerical procedures include discrete and continuous sets of the design variables. Results of numerical analysis are presented in the form of tables, cross section outlines and diagrams. Results are discussed at the end of the work. These results may be useful for designers in optimal designing of thin-walled beams, increasing information required in the decision-making procedure.