• Journal of Environmental Health Sciences
• /
• v.32 no.2 s.89
• /
• pp.111-117
• /
• 2006

Polybrominated diphenyl ethers (PBDEs) in pine needles and soil samples from rural area were analyzed in this study. Concentrations of PBDE congeners were ranged between 0.2 and 3104 pg/g DW(dry weight) in pine needles and between 2.4 and 1997 pg/g DW in soil samples. The most abundant congener both in pine needles and soil samples was BDE-209, which was related to importation and production of deca-BDE technical mixtures in Korean industry. And BDE-99, BDE-47, BDE-100 deposited in pine needles and soil samples were closely matched with the major constituents of the penta-BDE technical mixture. Those can be interpreted as an evidence that transfer of the congeners in deca-BDE and penta-BDE technical mixtures from source to pine needle and soil occurs with broadly similar efficiency. Correlation coefficient(r) of PBDE congeners deposited in pine needles and soil samples is very significant because it implies th at there has been little weathering/degradation/alteration of the congeners generated from sources during atmospheric transport or within pine needles and soil themselves.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.156-158
• /
• 2009

New liquid crystal (LC) host mixtures and reactive mesogens (RMs) designed for the Polymer Sustainable Vertically Aligned (PS-VA) mode have been developed. The novel combination of LC host mixture with RMs enables to show superior LC display performance with high reliability and to contribute for the robust LC panel production process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.23-29
• /
• 2008

This study was performed to improve the printability of Hanji using a microbial cellulose from Saprolegnia ferax through investigating the printability of Hanji sized with the mixture of the microbial cellulose and various kinds of sizing agents. Conclusions obtained from the results of this study were as follows. The proper concentration of a microbial cellulose in sizing a printable Hanji with it was 0.5%. In general, there was no remarkable effect but some effect on the opacity and ink density. Hanji was sized with the mixture(5:5) of microbial cellulose(0.5%) and AKD(1.0%). As a result, ink spread was remarkably improved by the girth reduction of ink spot. There was remarkable effect because the mixture(5:5) of a microbial cellulose(0.5%) and CMC(1.0%) improved not only the gloss but also the density and girth of ink spot. Mixing(7:3) with corn starch(3.0%) showed the smallest girth of ink spot among applied sizing agents. Mixing(7:3) with PVA(5.0%) also showed some effect in the density and girth of ink spot.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1071-1076
• /
• 2007

Polychlorinated biphenyls(PCBs) and polybrominated diphenyl ethers (PBDEs) were measured in pine needles of Seoul, and Ansung(GyeongGi-do) to investigate composition, source, and regional concentration of PBDEs. Concentration of total PCBs in Seoul and Ansung showed 608, 945 pg/g DW (mean: 777 pg/g DW), respectively, also concentration of total PBDEs(pg/g DW) in Seoul and Ansung showed 7944, 14,255 pg/g DW(mean 11,100 pg/g DW). Tetrachlorinated biphenyls(Tetra-CBs) and Decabromodiphenyl ethers (Deca-BDE) were detected in relatively high concentration compared to other PBDE congeners in Seoul and Ansung. Correlation coefficients(r) of between PCB congeners in pine needles detected of Seoul and Ansung were significant (r=0.85, p<0.01). It suggested that PCBs concentration in pine needles may originate from secondary sources such as air-plant partition. The similarity of between PBDE congeners profile to those of the technical mixture formulation (Bromkal 70-5DE) suggests a source of this product in these sites.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.72-75
• /
• 1986

A convenient high performance liquid chromatographic method was established for the quantitative determination and content uniformity test of aclatonium napadisilate preparation. This method was more simple to make the sample solution for injection, and easy to determine the content in the preparation. Aclatonium napadisilate was chromatographed using a $Lichrosorb-NH_2$ column $(4mm\;{\times}\;25\;cm$, and acetonitrile-water mixture (83:17) as an eluent at a flow rate of 1.8 ml/min. RI-detector response was linear over a range of $0.5{\sim}2.0%$ aclatonium napadisilate under above conditions. Reproducibility studies gave relative standard deviation of 1.29%.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.1
• /
• pp.5-10
• /
• 2008

A flame speed of methane mixture of water vapor and air have been measured to study the process of flame propagation using schlieren photographs. The quantity of water vapor contained were changed 5% and 10% of total mixture, and equivalence ratio of mixture between 0.8 and 1.2 were tested under the ambient temperature 323K and 373K. The results showed that the burning velocity was decreased by increasing the water vapor contents due to the interruption of flame development. And, the reduction rate of burning velocity was smaller by increasing the water contents under the same ambient temperature. The effects of ambient temperature on burning velocity was decreased by increasing the water vapor contents.

• Wind and Structures
• /
• v.25 no.4
• /
• pp.381-395
• /
• 2017

Nonlinear vibration and instability of cylindrical shell conveying fluid-nanoparticles mixture flow are studied in this article. The surrounding elastic medium is modeled by Pasternak foundation. Mixture rule is used for obtaining the effective viscosity and density of the fluid-nanoparticles mixture flow. The material properties of the elastic medium and cylindrical shell are assumed temperature-dependent. Employing first order shear deformation theory (FSDT), the motion equations are derived using energy method and Hamilton's principal. Differential quadrature method (DQM) is used for obtaining the frequency and critical fluid velocity. The effects of different parameters such as volume percent of nanoparticles, boundary conditions, geometrical parameters of cylindrical shell, temperature change, elastic foundation and fluid velocity are shown on the frequency and critical fluid velocity of the structure. Results show that with increasing volume percent of nanoparticles in the fluid, the frequency and critical fluid velocity will be increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.589-593
• /
• 2014

AlNO multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. $Al_2O_3$/AlNO(LMVF)/AlNO(HMVF)/Al/substrate of 4 multi-layer has been prepared in an Ar and ($N_2+O_2$) gas mixture, and $Al_2O_3$ of top layer is anti-reflection layer on double AlNO(LMVF)/AlNO(HMVF) layers and Al metal of infrared reflection layer. In this study, the roughness and surface properties of AlNO thin films were estimated by field emission scanning electron microscopy(FE-SEM). The grain size of AlNO thin films increased with increasing sputtering power. The composition of thin films has been systematically investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The absorptance of AlNO films shows the increasing trend with swelling ($N_2+O_2$) gas mixture in HMVF and LMVF deposition. The excellent optical performance showed above 98% of absorptance in visible wavelength region.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.293-300
• /
• 2011

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.380-390
• /
• 2007

The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene