• 한국가스학회지
• /
• 제19권5호
• /
• pp.104-111
• /
• 2015

극한지 천연가스 수송배관망의 기술개발은 동토지역의 특수성을 고려해야 하는 매우 흥미롭고 도전적인 분야로서 본 연구는 수송배관의 핵심기술을 파악하기 위하여 극한지 애로기술에 대한 문헌조사와 주요 영향인자를 파악하였다. 특히, 열유동 고려사항에 대한 문헌조사를 통하여 극한지 천연가스 수송배관망 유동확보기술을 개발하기 위한 이론적 접근 주제를 정할 수 있었고, 또한 이론 해석을 통한 기본적인 결과를 도출할 수 있었다.

• 한국추진공학회지
• /
• 제14권4호
• /
• pp.71-80
• /
• 2010

한국형발사체(KSLV-II)는 소형위성발사체(KSLV-I)의 후속으로 개발되는 1.5톤급 지구 저궤도 위성 발사체이다. 한국형발사체를 위해 75톤급 액체로켓엔진을 자력 개발할 예정이며, 이 엔진은 선행 연구로 수행된 30톤급 액체엔진 기술에 기반을 두고 있다. 액체로켓엔진 연소기는 높은 연소안정성과 구조적 건전성, 열적 내구성을 요구한다. 본 논문에서는 75톤급 액체로켓엔진 연소기의 설계요구조건과 이를 구현하기 위한 설계 과정에서 해석적 기반을 활용하여 수행한 제반 기술적 검토 사항을 제시하였다.

• 한국IT서비스학회지
• /
• 제20권6호
• /
• pp.45-62
• /
• 2021

After the COVID-19 outbreak in 2019, the spread of COVID-19 has not been easily caught despite preventive measures in each country. The spread of COVID-19 has hit the world, especially in the economic and tourism sectors. Countries around the world are easing restrictions on the movement of vaccinated people in preparation for the post-corona era. Under the name of "Vaccine Passport," "Vaccination Certificate," and "Digital Health Pass," vaccination measures are being implemented to allow vaccination recipients to use multi-use facilities. However, there is no international agreement on the movement of countries, and each country has its own immigration policy. In order to return to pre-corona daily life, global agreements must be reached from the movement of vaccinated people between countries, and standards and implementation methods must be determined. This study focuses on the implementation and utilization of vaccination certificates suitable for the COVID-19 era. We will look at the spread of COVID-19 and its international response policies. In the case of COVID-19, we will investigate why vaccination certificate installation should be standardized and how far the current standardization has been discussed, and discuss the characteristics of vaccination certificate installation and considerations. In order for the immunization certificate discussed in the previous chapter to be recognized internationally, institutional and technical considerations are identified and security factors that may occur in each implementation are also presented. Finally, the international recognition case of vaccination certificate is discussed, and the method of installation and utilization of vaccination certificate is proposed. This paper can be used as a policy because of its timeliness in studying the standards of vaccination certificates and considerations for international recognition to restore movement between countries in the spread of COVID-19. In addition, if other infectious diseases occur in the future or similar cases where movement between countries is restricted, it can be used as a reference to support the movement of verified people.

• Archives of Plastic Surgery
• /
• 제50권1호
• /
• pp.17-25
• /
• 2023

A variety of reduction labiaplasty techniques have been introduced to date, but no single technique will offer the optimal solution for every patient. Rather, the technique should be chosen based on anatomical, configurational, and technical considerations, as well as on patients' personal preferences regarded maintenance of the labial rim, maintenance of labial sensitivity, and prevention of iatrogenic thickening of the labium. We reviewed, defined, and assessed labial configurational variety, neurovascular supply, reduction techniques, and patient's preferences as the considerations relevant to the choice of labiaplasty technique. Based on this review, an algorithm was constructed that leads to a choice of reduction technique through five decisions to be made regarding (1) resection or (partial) retention of the labial free rim, (2) the measure of required labial width reduction, (3) labial vascular status, (4) prevention of iatrogenic labial thickening, and (5) preservation of labial sensibility. The choice of techniques includes edge trimming, central spindle form de-epithelialization or full-thickness resection, and three modifications of the wedge resection or de-epithelialization technique. These three modifications comprised a modified anterior resection or de-epithelialization combined with posterior flap transposition, a custom flask resection or de-epithelialization, and a modified posterior wedge resection or de-epithelialization combined with anterior flap transposition. Use of the five decisional steps and the inclusion of modifications of all three conventional reduction techniques offer an improved algorithm for the choice of labioplasty technique.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.923-933
• /
• 2012

본 논문에서는 인지 무선 기술을 기반으로 한 주파수 공동 사용 기술을 적용하는 대역으로 주목을 받고 있는 TVWS 대역에 관하여 국내 기술 기준을 제정할 경우에 기존 서비스 보호, TVBD의 기술적인 요구 사항 및 TV 대역 DB 구축 관점에서 고려하여야할 기술적인 사항들을 제안한다. 제안한 사항들의 기본 개념은 기존 서비스인 DTV 및 무선 마이크를 절대적으로 보호해야 한다는 점을 기반으로 하고 있다. 외국의 기술 규격을 분석한 결과, 영국의 Ofcom 접근 방법은 매번 채널 및 출력 선정 알고리즘을 계산해야 되므로 TV 대역 DB에 상당한 부하가 걸릴 수 있는 반면에 미국의 FCC 접근 방법은 상대적으로 신속한 채널 목록과 송신 출력을 지정해 줄 수 있는 장점이 있음을 알 수 있었다.

• 실천공학교육논문지
• /
• 제16권1_spc호
• /
• pp.21-31
• /
• 2024

본 연구는 ChatGPT를 활용한 글쓰기 의사소통 역량을 평가하는 AI 평가도구 개발에 초점을 두었다. 개발 과정에 있어 내용 전문가와 기술 전문가 간의 상호작용을 통해 IT와 인문사회 영역의 융합과정을 탐구하였다. 내용 전문가와 기술 전문가는 긴밀한 소통 및 상호작용을 통해, 글쓰기 의사소통 역량의 채점기준을 탑재하였고 각 영역별(내용의 적절성, 조직의 효과성, 어법의 정확성) 점수와 피드백을 제공하는 AI 평가도구를 개발하였다. 이 과정에서 본 연구는 내용과 기술이 어떻게 결합하는지에 대한 과정을 드러내고, 이후 생성형 AI를 활용한 평가도구 기술 전문가를 포함한 융합연구자들이 유의해야 할 사항 등에 대해 제시하였다.

• 한국환경복원기술학회지
• /
• 제12권5호
• /
• pp.121-132
• /
• 2009

The agency which is responsible for work related to the restoration of vegetation on the quarry in Hong Kong is the Geotechnical Engineering Office of Civil Engineering and Development Department (CEDD). CEDD's environmental management system was certified as ISO 14001 : 2004 in 2006 and diverse instructions and technical documents about the restoration of the quarry were published and used for the performance of work and the implementation of the project. The restoration of the quarry is being carried out to respond to short-term and long-term goals. The general instructions for the restoration of vegetation says that a plant, when selected, should be self-sustainable with minimum maintenance required, have a high growth and survival rate, be tall enough to cover the rock slope faces, and preferably produce colourful flowers. These instructions prescribe the vegetation introduction technology, planting seasons, structural material of the vegetation works, maintenance and management, tree nursery operation, means of water supply, etc. This report introduced the outline of work on restoring vegetation carried out at Anderson Road, Shek O, Lam Tei, Turret Hill, Lamma, all large-sized quarries. In addition, it additzed Anderson Road's master plan. It is hoped that the Hong Kong examples so introduced are referred to in terms of institutional and technical considerations related to the nation's project for restoring quarries.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.168-182
• /
• 2001

A new concept of stock preparation for the increase of bending stiffness in paper and board was proposed. The 'stiff' fibers, which were mechanically not treated or treated slightly to remove fiber curls, were combined with extensively refined fibers (ERF) to produce higher stiffness papers than those where the whole fibers were refined. The combination of 'stiff' fibers and extensively refined fibers produced higher stiffness at the same tensile strength than the control furnish, in which all the fibers are refined together. In this concept, the fibers from recycled papers could be as much useful as the virgin fibers as long as they are stiff enough or they can produce highly bondable fiber fractions by extensive refining. Use of the concept in real paper mill needs considerations such as increase of refining energy, slower drainage, and added drying burden, but savings of wood fibers, utilization of more recycled fibers, and increase of physical properties may offset the negative concerns. The success of this concept implementation in mills, therefore, depends on the wood fiber market around the mills and the proper decision making for the papermakers about how to apply this concept.

• 항공우주산업기술동향
• /
• 제7권1호
• /
• pp.128-140
• /
• 2009

본 논문에서는 FAR Part 23에 따른 복합재 소형항공기 구조 인증시 복합재료의 인증활동에서 발생할 수 있는 기술적 문제점 또는 고려사항을 검토하고, 이에 대한 인증 신청자가 수행해야 할 것으로 예상되는 사항을 검토하였다. 본 논문은 복합재 인증시 발생하는 기술적 문제에 초점을 맞추어 규정과의 관계 및 인증 경험에 관련한 기술 적 문제를 설명하였다. 복합재 인증활동에 대한 개괄적 내용과 복합재 항공기 구조물의 인증에 유용한 지침과 참고자료를 제시하고 있다. 본 논문에 소개된 일반적인 인증에 관련한 내용은 모든 복합재료 구조에 대해 적용되어지지 않을 수 있으며, 비행 안전에 치명적이지 않는 2차 구조에 대해서는 적용되어지지 않을 수 있다.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.52-59
• /
• 2004

The greater Increase of the demand for environmental friendly materials especially for packaging industry leads to the larger interest in the reusable and recycable materials such as pulp mold. Although the pulp mold has great characteristics for packaging, some deficiency compared with other packaging material like EPS(Expandable Polystyrene) need to be overcome, for example, the relative higher cost. In this report, since the water drainage rate at the forming zone of a wet pulp mold process could have a great influence on the economical efficiency not only by increasing machine speed but also reducing the drying energy, the optimum ways for increasing drainage were investigated The mechanism of vacuum drainage In pulp mold forming was successfully evaluated by using RDA(Retention and Darinage Analyzer). Since the conditions of stock were greatly affected by the pulping time of low consistency pulper, the optimum pupling time was investigated with considerations of all stock preparation processes. The change of stock temperature and the addition of polyelectrolyte could improve the vacuum drainage rate. It was founded that the wire mesh types of mold former had a little influence on the retention because of the relatively mild vacuum drainage. However, the bigger size of dewatering hole showed better drainage rate and could reduce the plugging and con lamination of mold.