• Korean Journal of Environment and Ecology
• /
• v.25 no.2
• /
• pp.211-226
• /
• 2011

The purpose of this paper was to ensure the basis for effective management of Tricholoma matsutake mountain province, to perform biotope mapping of Pinus densiflora based on growth environment of Tricholoma matsutake, target a cluster of Yangyang-gun, Kang Won-do. Study Methods were to review on growth and environmental characteristics of Tricholoma matsutake through internal and external documents and to identify vegetational structure and soil characteristics. This paper studied growth structure and soil environment of Pinus densiflora forest where a farm of production area for Tricholoma matsutake of in order to set the standard of Pinus densiflora biotope. Mapping standards were derived by separating of landform conditions, soil conditions, vegetation conditions. Biotope types were divided into possible production area for Tricholoma matsutake and potential production area for Tricholoma matsutake, possible production area for Tricholoma matsutake were Pinus densiflora biotope in landform and soil structure that enables Tricholoma matsutake production and Single-layered Pinus densiflora biotope of less than 30cm(DBH)-Tree species that other shrub is dominant in shrub layer, Multi-layered Pinus densiflora biotope that Pinus densiflora forest was predominant in understrory layer. Potential production area for Tricholoma matsutake were single-layered Pinus densiflora biotope of more than 30cm(DBH) in landform that enables Tricholoma matsutake production, Pinus densiflora biotope with Quercus predominant in the understrory layer, single-layered Pinus densiflora biotope with Quercus predominant in shrub layer, inappropriate vegetation structure area that the induction of production of Tricholoma matsutake was possible through future vegetation management. According to the research results, Pinus densiflora forest were divided into 16 types; 6 types of possible Tricholoma matsutake production areas, 9 potential Tricholoma matsutake production areas and 16 types of areas where Tricholoma matsutake production was impossible. Possible production areas account for 15.48%, or $9.8km^2$ out of the total Pinus densiflora forest while potential production areas take up 32.42%, or $20.52km^2$, and areas where Tricholoma matsutake production was impossible was 52.10%, or $32.97km^2$.

• KDI Journal of Economic Policy
• /
• v.14 no.1
• /
• pp.89-119
• /
• 1992

This paper purports to analyze the economic rationale of compensating balance requirements and its impact on money supply. This practice has recently been severely criticized for artificially increasing the money supply and, therefore, limiting the nation's aggregate lending policy under the tight constraint of the given money supply target. A review of the existing literature implies that compensating balance requirements is a banking practice which leads to corrections in the distortion of financial resource allocation due to the imperfection of financial market stemming from asymmetric information and/or financial regulations on deposit and lending rates. Therefore, the economic rationale of this practice is deemed to improve the efficiency of financial resource allocation. On the other hand, the macroeconomic impact of compensating balance requirements on the money supply depends on the impact on the money multiplier, which in turn depends on the desired ratio of deposit that people wish to maintain on the money borrowed from the banking system, and on the desired reserve ratio that the banking system would like to hold for deposit withdrawal. If the compensating balance requirements could increase the desired ratio of deposit to borrowing (bank lending), it will increase the available amount of total reserve within the banking system and, in turn, the money multiplier. However, this channel has not been fully analyzed in the literature, and the direction of the effect is ambiguous. If the practice could reduce the turn-over rate of deposit and, thereby, reduce the desired reserve ratio of the banking system, then it will also increase the money multiplier. While this channel operates unambiguously toward increasing the money multiplier, this effect will be limited by the extent that the banking system holds the excess reserve over the required reserve because the excess reserve will set the maximum amount for the desired reserve to fall. This paper tries to determine the effect on the money supply by empirically estimating the multiplier and the desired ratio of deposit to lending equations as functions of the ratio of compensating balance to the related lending, which is not observable and is estimated for the regression purpose. The results suggest that the effect of compensating balance requirements on the money supply in Korea does not exist or is very tenuous even if it could operate. Therefore, this paper concludes that the well publicized policy of cross cancelling the compensating balance and the related lending will not be effective at controlling the money supply and increasing the amount of loans without expanding the money supply.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.175-185
• /
• 2000

This paper described on a basic study to organize fishing vessel control system in order to control efficiently fishing vessel in Korean offshore. It was digitalized ARPA image on the fishing processing of a fleet of purse seiner in conducting fishing operation at Cheju offshore in Korea as a digital camera and then simulated by used VTMS. Futhermore, it was investigated on the application of FVTMS which can control efficiently fishing vessels in fishing ground. The results obtained were as follows ; (1) It was taken 16 minutes and 35 minutes to casting and hauling net in fishing processing respectively. The length of rope pulled by scout boat was 200m, tactical diameter in casting net was 340.8m, turning speed was 6kts as well. (2) The processing of casting and hauling net was moved to SW, NE as results of simulation when the current direction and speed set into NE, 2kts and SW, 2kts respectively. Such as these results suggest that can predict to control the fishing vessel previously with information of fishing ground, fishery and ship's maneuvering, etc. (3) The control range of VTMS radar used in simulation was about 16 miles. Although converting from a radar of the control vessel to another one, it was continuously acquired for the vector and the target data. The optimum control position could be determined by measuring and analyzing to distance and direction between the control vessel and the fleet of fishing vessel. (4) The FVTMS(fishing vessel traffic management services) model was suggested that fishing vessels received fishing conditions and safety navigation information can operate safely and efficiently.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.97-103
• /
• 2004

This paper presents a general overview of the Korean stick-held dip net fishery for Pacific saury operated in the North Pacific Ocean since 1985. Annual catches, annual centroids distribution of fishing ground, and optimum fishing temperatures were compared between the periods before and after the new Korea-Japan bilateral fishery arrangement established in 1998. Fishing usually began in May and ended by December, during which major catches were taken in the months September~November before the bilateral fishery arrangement between Korea and Japan, whereas in August~October after the arrangement. It was observed that after the arrangement the centroids of fishing ground was shifted from the usual fishing area off the east coast of Japan to the east of South Kuril Islands, 45$^{\circ}$N and 151$^{\circ}$E. Optimum fishing temperatures appeared to be different by month ; 12.5~14.4$^{\circ}C$ in May, 12.0~14.2$^{\circ}C$ in June, 11.4~13.9$^{\circ}C$ in July, 11.4~15.9$^{\circ}C$ in August, 12.9~16.9$^{\circ}C$ in September, 12.7~17.3$^{\circ}C$ in October, 13.1~17.6$^{\circ}C$ in November, and 15.0~19.1$^{\circ}C$ in December. A total of 13 species were caught during scientific observation periods but the target species, Pacific saury, accounted for about 99.9% of the total catch. Although there was no difference in fishing days between those vessels equipped with the sonar and those without sonar, number of set, total catch, and CPUE of those with sonar were higher than those without sonar by 13%, 26%, and 12%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.161-183
• /
• 2011

This study aims to design, develop the impact of a high school course in practical problem- focused teaching plan which will enable students to deal with an aging society, and prepare well for the aging by looking at issues the elderly face. This study set a target of analyzing the 2007 revised curriculum manual to develop instructor-led teaching and learning plans for 'Successful aging preparation'. Five common subjects were reframed on a practical problem basis through factor analysis of preliminary research regarding aging education for teenagers and the 2007 revised curriculum and textbooks of Technology Home Economics, and Human Development. The practical problem was 'What do we need to do to Successfully live an independent life in aging?', and the subjects studied to answer this question were the aging society and population changes. the nature of the elderly, aging preparation, care of the elderly, and welfare services for the elderly. These five subjects were grouped under the main categories of The Aging Society. Understanding the Elderly, and aging Preparation. The ultimate objective of the lessons was, through critical reasoning, to inquire into the causes of current problems the elderly face so that teenagers can understand aging societies and the elderly, and prepare for a Successful aging. Another objective was to seek reasonable alternatives for teenagers as they prepare for Successful and independent aging, and increase their problem-solving abilities in choosing the best course of action by considering the ripple effect of consequences of each of those alternatives. The practical problem-teaching lesson plans consisted of five classes on practical reasoning instruction. This study suggests that new high school curricula should include lessons on preparation for aging so that students can deal successfully with our aging society.

• Journal of Intelligence and Information Systems
• /
• v.17 no.1
• /
• pp.91-110
• /
• 2011

This paper analyzes the cases where the hotels have increased their services and enhanced their work process through IT solutions to cope with computerization globalization. Also the cases have been studies where national hotels use the CRM solution internally to respond effectively to customers requests, increase customer analysis, and build marketing strategies. In particular, this study discusses the introduction of the CRM solutions and CRM sales business and marketing services using a process for utilizing the presumed, CRM by introducing effective DEA(Data Envelopment Analysis). First, the comparison has done regarding the relative efficiency of L Company with the CCR model, then compared L Company's restaurants and facilities' effectiveness through BCC model. L Company reached a conclusion that it is important to precisely create and manage sales data which are the preliminary data for CRM, and for that reason it made it possible to save sales data generated by POS system on each sales performance database. In order to do that, it newly established Oracle POS system and LORIS POS system concerned with restaurants for food and beverage as well as rooms, and made it possible to stably generate and manage sales data and manage. Moreover, it set up a composite database to control comprehensively the results of work processes during a specific period by collecting customer registration information and made it possible to systematically control the information on sales performances. By establishing a system which unifies database and managing it comprehensively, impeccability of data has been greatly enhanced and a problem which generated asymmetric data could be thoroughly solved. Using data accumulated on the comprehensive database, sales data can be analyzed, categorized, classified through data mining engine imbedded in Polaris CRM and the results can be organized on data mart to provide them in the form of CRM application data. By transforming original sales data into forms which are easy to handle and saving them on data mart separately, it enabled acquiring well-organized data with ease when engaging in various marketing operations, holding a morning meeting and working on decision-making. By using summarized data at data mart, it was possible to process marketing operations such as telemarketing, direct mailing, internet marketing service and service product developments for perceived customers; moreover, information on customer perceptions which is one of CRM's end-products could feed back into the comprehensive database. This research was undertaken to find out how effectively CRM has been employed by comparing and analyzing the management performance of each enterprise site and store after introducing CRM to Hotel enterprises using DEA technique. According to the research results, efficiency evaluation for each site was calculated through input and output factors to find out comparative CRM system usage efficiency of L's Company four sites; moreover, with regard to stores, the sizes of workforce and budget application show a huge difference and so does the each store efficiency. Furthermore, by using the DEA technique, it could assess which sites have comparatively high efficiency and which don't by comparing and evaluating hotel enterprises IT project outcomes such as CRM introduction using the CCR model for each site of the related enterprises. By using the BCC model, it could comparatively evaluate the outcome of CRM usage at each store of A site, which is representative of L Company, and as a result, it could figure out which stores maintain high efficiency in using CRM and which don't. It analyzed the cases of CRM introduction at L Company, which is a hotel enterprise, and precisely evaluated them through DEA. L Company analyzed the customer analysis system by introducing CRM and achieved to provide customers identified through client analysis data with one to one tailored services. Moreover, it could come up with a plan to differentiate the service for customers who revisit by assessing customer discernment rate. As tasks to be solved in the future, it is required to do research on the process analysis which can lead to a specific outcome such as increased sales volumes by carrying on test marketing, target marketing using CRM. Furthermore, it is also necessary to do research on efficiency evaluation in accordance with linkages between other IT solutions such as ERP and CRM system.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.159-164
• /
• 2014

The objective of this study was to establish an open-field experimental warming treatment and precipitation manipulation system to simulate climate change impact for Pinus densiflora seedlings based on a climate change scenario in Korea. Two-year-old seedlings were planted in a nursery in April, 2013. The air temperature of warmed plots (W) was set to increase by $3.0^{\circ}C$ compared to control plots (C) using infrared lamps from May, 2013. The three precipitation manipulation consisted of precipitation decrease using transparent panel (-30%; $P^-$), precipitation increase using pump and drip-irrigation (+30%; $P^+$) and precipitation control (0%; $P^0$). Initially, the air temperature was $2.2^{\circ}C$ higher in warmed plots than in control plots and later air temperature was maintained close to the target temperature of $3.0^{\circ}C$. The average soil temperature was $3.1^{\circ}C$ higher in warmed plots than in control plots. Also the average soil moisture content after the precipitation manipulation increased by 13.9% in $P^+W$ and decreased by 10.0% in $P^-W$ compared to $P^0W$, and increased by 23.7% in $P^+C$ and decreased by 7.6% in $P^-C$ compared to $P^0C$. It was confirmed that the open-field experimental warming and precipitation manipulation system was properly designed and operating.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.122-125
• /
• 2004

In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration gating techniques that can adjust patients' beds by using reversed values of the data obtained. The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range 3 cm ${\sim}$3 m), host computer (RS232C) and stepping motor (torque 2.3Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place in order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data(three dimensional data form with distance of 2cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. The result of analyzing the acquisition-correction delay time for the three types of data values and about each value separately shows that the data values coincided with one another within 1% and that the acquisition-correction delay time was obtained real-time (2.34 ${\times}$ 10$^{-4}$sec). This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultra sonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.