• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2024

For measuring the performance of passive sonars, we usually consider the maximum Detection Range (DR) under the environment and system parameters in operation. In shallow water, where sound waves inevitably interacts with sea surface or bottom, detection generally maintains up to the maximum range. In deep water, however, sound waves may not interact with sea surface or/and bottom, and thus there may exist shadow zones where sound waves can hardly reach. In this situation, DR alone may not completely define the performance of each sonar. For complete description of sonar performance, we employ the concept 'Robustness Of Detection (ROD)'. In the coastal region of the East Sea, the spatial variations of water masses have close relations with DR and ROD, where the two parameters show reverse spatial variations in general. The spatial and temporal analysis of the temperature by employing the Empirical Orthogonal Function (EOF) shows that the 1-st mode represents typical pattern of seasonal variation and the 2-nd mode represents strength variations of mixed layers and currents. The two modes are estimated to explain about 92 % of the variations. Assuming two types of targets located at the depths of 5 m (shallow) and 100 m (deep), the passive sonar performance (DR) gives high negative correlations (about -0.9) with the first two modes. Most of temporal variations of temperature occur from the surface up to 200 m in the water column so that when we assume a target at 100 m, we can expect detection performance of little seasonal variations with passive sonars below 100 m.

• Korean Journal of Environment and Ecology
• /
• v.21 no.4
• /
• pp.336-346
• /
• 2007

This study was conducted to evaluate the vegetation structure of 34 plots for inspection(plot unit: $100m^2$)of evergreen broad-leaved forest in Dongbaekdongsan(Mt.), Jeju-do, Korea. In accordance with the results of TWINSPAN and mean importance percentage analysis, the target forest was aged $28{\sim}52$, and classified into seven community types in total: Ilex rotunda community, Castanopsis sieboldii community, Castanopsis sieboldii-Quercus glauca community, Quercus glauca-Castanopsis sieboldii community, Quercus glauca community, Quercus glauca-Camellia japonica community, and Quercus glauca-Styrax japonica community. According to the results of importance percentage analysis and DBH class distribution of major woody species, the vegetational aspects showed that the dominant species were Castanopsis sieboldii and Quercus glauca in the canopy layer and Camellia japonica in the subordinate layer. Ilex rotunda and Quercus glauca-Styrax japonica community were damaged vegetation in the canopy layer. According to the index of Shannon's diversity in the six communities including the dominant species - Quercus glauca and Castanopsis sieboldii, their species diversity degree was $0.8745{\sim}1.3018$ and that of Ilex rotunda community was the lowest 0.7619. Camellia japonica, Eurya japonica, Ilex rotunda, Trachelospermum asiaticum var. intermedium, Ardisia crenata appeared in all the seven communities. In addition, Litsea coreana and Cinnamomum japonicum as well as Neolitsea serica presumed as climax species in the warm temperate climate also appeared and the constancy ratio of Cinnamomum japonicum was more than 80%. As a result, the target forest in Dongbaekdongsan(Mt.) was mainly compose of Castanopsis sieboldii and Quercus glauca in the canopy layer as a mixed vegetational pattern, and Cameliia japonica was dominant in the subordinate layer. Continuous monitoring was required, since Camellia japonica was strong in the subordinate layer in contrast to the weakness of Litsea coreana and Neolitsea serica reported as the species of climax stage in the forest with Evergreen Broad-leaved Vegetation at a viewpoint of successional direction.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.187-192
• /
• 2013

Purpose: We investigate the results of changed heart volume and heart dose in the left breast cancer patients while considering the movements of respiration. Materials and Methods: During the months of March and May in 2012, we designated the 10 patients who had tangential irradiation with left breast cancer in the department of radiation Oncology. With acquired images of free breathing pattern through 3D and 4D CT, we had planed enough treatment filed for covered up the whole left breast. It compares the results of the exposed dose and the volume of heart by DVH (Dose Volume histogram). Although total dose was 50.4 Gy (1.8 Gy/28 fraction), reirradiated 9 Gy (1.8 Gy/5 Fraction) with PTV (Planning Target Volume) if necessary. Results: It compares the results of heart volume and heart dose with the free breathing in 3D CT and 4D CT. It represents the maximum difference volume of heart is 40.5%. In addition, it indicated the difference volume of maximum and minimum, average are 8.8% and 27.9%, 37.4% in total absorbed dose of heart. Conclusion: In case of tangential irradiation (opposite beam) in left breast cancer patients, it is necessary to consider the changed heart volume by the respiration of patient and the heartbeat of patient.

• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.153-162
• /
• 2001

Purpose : The mechanical insights of death of cancer cells by ionizing radiation are not of yet clearly defined. Recent evidences have demonstrated that radiation therapy may induce cell death via activation of signaling pathway for apoptosis in target cells. This study is designed whether ionizing radiation may activate the signaling cascades of apoptosis including caspase family cysteine pretenses, $Bcl_2/Bax$, cytochrome c and Fas/Fas-L in target cells. Materials and Methods : HL-60 cells were irradiated in vitro with 6 MV X-ray at dose ranges from 2 Gy to 32 Gy. The cell viability was tested by M assay and the extent of apoptosis was determined using agarose gel electrophoresis. The activities of caspase proteases were measured by proteolytic cleavages of substrates. Western blot analysis was used to monitor PARP, Caspase-3, Cytochrome-c, Bcl-2, Bax, Fas and Fas-L. Results : Ionizing radiation decreases the viability of HL-60 cells in a time and dose dependent manner. Ionizing radiation-induced death in HL-60 cells is an apoptotic death which is revealed as characteristic ladder-pattern fragmentation of genomic DNA over 16 Gy at 4 hours. ionizing radiation induces the activation of caspase-2, 3, 6, 8 and 9 of HL-60 cells in a time-dependent manner. The activation of caspase-3 pretense is also evidenced by the digestion of poly (ADP-ribose) polymerase and procaspase 3 with 16Gy ionizing irradiation. Anti-apoptotic Bcl2 expression is decreased but apoptotic Bax expression is increased with mitochondrial cytochrome c release in a time- dependent manner. In addiiton, expression of Fas and Fas-L is also increased in a time dependent manner. Conclusion : These data suggest that ionizing radiation-induced apoptosis is mediated by the activation of various signaling pathways including caspase family cysteine proteases, $Bcl_2/Bax$, Fas and Fas-L in a time and dose dependent manner.

• Interdisciplinary Bio Central
• /
• v.1 no.1
• /
• pp.3.1-3.6
• /
• 2009

Introduction: GTPases known as translation factor play a vital role as ribosomal subunit assembly chaperone. The bacterial Obg proteins ($Spo{\underline{0B}}$-associated ${\underline{G}}TP$-binding protein) belong to the subfamily of P-loop GTPase proteins and now it is considered as one of the new target for antibacterial drug. The majority of bacterial Obgs have been commonly found to be associated with ribosome, implying that these proteins may play a fundamental role in ribosome assembly or maturation. In addition, one of the experimental evidences suggested that Bacillus subtilis Obg (BsObg) protein binds to the L13 ribosomal protein (BsL13) which is known to be one of the early assembly proteins of the 50S ribosomal subunit in Escherichia coli. In order to investigate binding mode between the BsObg and the BsL13, protein-protein docking simulation was carried out after generating 3D structure of the BsL13 structure using homology modeling method. Materials and Methods: Homology model structure of BsL13 was generated using the EcL13 crystal structure as a template. Protein-protein docking of BsObg protein with ribosomal protein BsL13 was performed by DOT, a macro-molecular docking software, in order to predict a reasonable binding mode. The solvated energy minimization calculation of the docked conformation was carried out to refine the structure. Results and Discussion: The possible binding conformation of BsL13 along with activated Obg fold in BsObg was predicted by computational docking study. The final structure is obtained from the solvated energy minimization. From the analysis, three important H-bond interactions between the Obg fold and the L13 were detected: Obg:Tyr27-L13:Glu32, Obg:Asn76-L13:Glu139, and Obg:Ala136-L13:Glu142. The interaction between the BsObg and BsL13 structures were also analyzed by electrostatic potential calculations to examine the interface surfaces. From the results, the key residues for hydrogen bonding and hydrophobic interaction between the two proteins were predicted. Conclusion and Prospects: In this study, we have focused on the binding mode of the BsObg protein with the ribosomal BsL13 protein. The interaction between the activated Obg and target protein was investigated with protein-protein docking calculations. The binding pattern can be further used as a base for structure-based drug design to find a novel antibacterial drug.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• The Korean Journal of Pesticide Science
• /
• v.9 no.1
• /
• pp.70-80
• /
• 2005

To evaluate the exposure of molinate in agricultural environment and its effect against the non-target crop in air, this experiment was conducted to elucidate volatilization characteristics of molinate in aquatic condition and to determine critical concentration of molinate in the air causing phytotoxicity to Chili pepper. Cumulative volatilized rate of molinate from water was 22.7% at $35^{\circ}C$ for water temperature and 20 L/min for air velocity while 3.2% at $25^{\circ}C$ and 10 L/min within 47 hour after applied under closed system, respectively. The molinate concentrations in air above 60 cm height from soil surface of valley and open paddy rice field were reached the highest value of 18.17 and $11.59{\mu}g/m^3$, respectively within 24 hours after applying granular formulation at dose rate of molinate 150 g/1,000 $m^2$. However, their concentrations were drastically diminished to around 0.18 and $0.51{\mu}g/m^3$ level in 20 days after application, which volatilization pattern were similar to both regions. Also, the concentration of molinate in air above 60 cm height from soil surface was distributed higher 2 times than that above 180 cm height. Meanwhile, a phytotoxic symptom against the nearby chili pepper was revealed within three days after applied and molinate was detected $0.004{\sim}0.006$ mg/kg level from severe damaged leaves. The dose and exposure relations of molinate in the air against the non-target crop was also investigated in lab trial. The phytotoxic symptom, shriveled leaves, of the chili pepper was encountered by exposing two days with concentration of $13.6{\mu}g/m^3$, three days with $6.8{\mu}g/m^3$ or four days with $3.4{\mu}g/m^3$. The symptom was still recovered within four weeks after the plants had received fresh air. On the other hand, the phytotoxic response through root uptake of the herbicide in water culture was relatively insensitive, in which the symptom is observed ten days with the concentration of 300 ${\mu}g/L$.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.195-211
• /
• 2010

An exhibition is defined as market events for specific duration to present exhibitors' main product range to either business or private visitors, and it also plays a key role as effective marketing channels. Especially, as the effect of the opinions of the visitors after the exhibition impacts directly on sales or the image of companies, exhibition organizers must consider various needs of visitors. To meet needs of visitors, ubiquitous technologies have been applied in some exhibitions. However, despite of the development of the ubiquitous technologies, their services cannot always reflect visitors' preferences as they only generate information when visitors request. As a result, they have reached their limit to meet needs of visitors, which consequently might lead them to loss of marketing opportunity. Recommendation systems can be the right type to overcome these limitations. They can recommend the booths to coincide with visitors' preferences, so that they help visitors who are in difficulty for choices in exhibition environment. One of the most successful and widely used technologies for building recommender systems is called Collaborative Filtering. Traditional recommender systems, however, only use neighbors' evaluations or behaviors for a personalized prediction. Therefore, they can not reflect visitors' dynamic preference, and also lack of accuracy in exhibition environment. Although there is much useful information to infer visitors' preference in ubiquitous environment (e.g., visitors' current location, booth visit path, and so on), they use only limited information for recommendation. In this study, we propose a booth recommendation methodology using Sequential Association Rule which considers the sequence of visiting. Recent studies of Sequential Association Rule use the constraints to improve the performance. However, since traditional Sequential Association Rule considers the whole rules to recommendation, they have a scalability problem when they are adapted to a large exhibition scale. To solve this problem, our methodology composes the confidence database before recommendation process. To compose the confidence database, we first search preceding rules which have the frequency above threshold. Next, we compute the confidences of each preceding rules to each booth which is not contained in preceding rules. Therefore, the confidence database has two kinds of information which are preceding rules and their confidence to each booth. In recommendation process, we just generate preceding rules of the target visitors based on the records of the visits, and recommend booths according to the confidence database. Throughout these steps, we expect reduction of time spent on recommendation process. To evaluate proposed methodology, we use real booth visit records which are collected by RFID technology in IT exhibition. Booth visit records also contain the visit sequence of each visitor. We compare the performance of proposed methodology with traditional Collaborative Filtering system. As a result, our proposed methodology generally shows higher performance than traditional Collaborative Filtering. We can also see some features of it in experimental results. First, it shows the highest performance at one booth recommendation. It detects preceding rules with some portions of visitors. Therefore, if there is a visitor who moved with very a different pattern compared to the whole visitors, it cannot give a correct recommendation for him/her even though we increase the number of recommendation. Trained by the whole visitors, it cannot correctly give recommendation to visitors who have a unique path. Second, the performance of general recommendation systems increase as time expands. However, our methodology shows higher performance with limited information like one or two time periods. Therefore, not only can it recommend even if there is not much information of the target visitors' booth visit records, but also it uses only small amount of information in recommendation process. We expect that it can give real?time recommendations in exhibition environment. Overall, our methodology shows higher performance ability than traditional Collaborative Filtering systems, we expect it could be applied in booth recommendation system to satisfy visitors in exhibition environment.

• The Korean Journal of Archival Studies
• /
• no.24
• /
• pp.215-274
• /
• 2010

Iron-making industries of the country, regardless of age has been the focus. This makes the iron production technology and production techniques that result in increased economic activity and because of the central charge. Therefore, the social development of ancient iron-making technology is based on phase-sensitive. Modern steel making up the monopoly of the country's target under the strict control of production, distribution was. It is essential to produce iron weapons was a threat is because you can keep the throne in the hands of the forces that can cause side effects when I went was to block. This study created a rail Cholbi(iron monument) and the regional distribution pattern of the production, construction background, looked on. Cholbi(iron monument) for the production and recording "the Annals of the Joseon Dynasty" often appear in history books and many academic interests, but was off target. Compared to a stone monument that was not generally as well as the Japanese colonial period and over the course of modernization destroyed, damaged a lot of cases the cause may be found in front. Cholbi(iron monument), except for the gravestones of the Joseon Dynasty monument erected in honor of virtue, as an example of content that dominated a packman business, founding of the school and confirmed that a few were built as a special purpose. Cholbi(iron monument) compared to the production technology or the cost of the monument's difficulty in financing follows. Therefore Cholbi(iron monument) the establishment of the Joseon Dynasty through the background of the economic situation and the local government can look. And iron technology began complaining about the object of history, economic conditions, with the change of season has been a change in people's consciousness tells you. Important data of ancient history as an epigraph that has been as important, the Middle Ages to modern times ranging from newly born to the time Cholbi(iron monument) in the development of the country's documentary subject to change should have been brought. Based on these discussions changes the identity of the hero monument and production inspector, review of production through the Joseon Dynasty period Cholbi (iron monument) contemplated the significance is reflected in production.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.85-94
• /
• 2006

In the 2000s, character animation technique is used at domestic TV character animation ads of diverse items displaying new character patterns and expression techniques of a high level. This study intends to identify the characteristics of TV character animation ads based ell character aesthetic theory and advertising rhetoric theory, and based on these findings, analyze trend and stream of expression in TV character animation ads by examining and classifying advertisements released in the past four years by items, character patterns and expression techniques. The results showed that TV character animation ads have been concentrated on confectionery, beverages and foods in the past, but the items have been diversified through the years. With reference to character patterns, personal and animal characters had made the main pattern, but recently product, virtual and composite characters are on the increase. In expression techniques, cell animation technique was found to be the most frequently used technique, which was followed by full-3D, cell and live action, cell and 3D and the clay animation technique. A trend like this suggests that TV character animation advertising items will continue to increase in line with the participation level of targets. In the meantime, personal and animal characters will continue to make the leading character pattern, while virtual and composite character patterns emerge in new forms. In expression techniques, live action combined with 30 technique and techniques using new expression materials will appear with cell animation technique as a central figure. As a whole, Korean character animation advertisement is expected to keep on growing to a new dimension in the aspect of items, character patterns and expression technique.