• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.805-810
• /
• 2002

Development of a small gas-turbine combustor for 100㎾ class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swiller in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of l170k, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted the performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than the target value. Therefore, the second prototype(TS2) was redesigned and the performance test was conducted with the critical focus on the pattern factor and the exit mean temperature. We adopted TS2 four variants to check the improvement of the pattern factor. As a result, the pattern factors of several variants were satisfied with the performance target. Finally, the TS2A variant was chosen as a final combustor fur our APU model.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.343-348
• /
• 2022

The STAP system suppresses clutter and jamming of the radar signal, but required a large number of samples for optimal performance. A large number of samples increases the signal processing computation. Therefore, there is need for a transformation method for reducing the signal rank. The LCMV beamforming method can easily set the distortion-free-constraint in the direction of arrival, and the beamforming scaling is excellent, so that overall rank can be reduced. In this study, the information of target is estimated using the proposed quadratic pattern constraints(QPC) and LCMV beamforming methods. The proposed method can perform beam pattern control in a desired direction according to the number of constraint conditions as a secondary pattern constraint condition. Through simulation, the performance of the propose method is verified. As a result on th simulation, the desired target was estimated when the proposed method had an angular resolution of 10 degrees or more, but it was not possible to accurately estimate the desired target when the angular resolution was less than 10 degrees.

• Korean Journal of Community Nutrition
• /
• v.16 no.3
• /
• pp.375-385
• /
• 2011

The nutritional balance of the menu plans prepared according to the target pattern was examined. Total of 81 home economics teachers throughout the nation and 161 3rd-grade middle-school girls in Chungnam area participated. The data was collected by questionnaire and analyzed by using SPSS WIN 12.0. Although both teacher and student groups had fairly good knowledge on preparing menu plans related concepts, they rarely make use any menu planning currently. More than 85% of menu plans investigated exceeded their energy goal in the target pattern. The energy contribution ratios of carbohydrate: protein: fat were 56.1%: 17.4%: 26.5% in teachers' menu plan and 55.1%: 17.2%: 27.7% in students' menu plan. The NAR of the protein, phosphorous, iron, zinc, vitamin A and C, thiamin, riboflavin, niacin, B6 was 1 or near 1. But in case of calcium, 56.5% of the menu plan prepared by the students was less than 1, and in case of folate 75.3% of teachers', and 85.1% of students' were less than NAR 1. The MAR of the 12 nutrients examined were 0.98, 0.97, and the DVS were 51, 49 for menu plan prepared by teachers and students, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.494-497
• /
• 1994

We propose a novel velocity detection method of moving object based on a speckle pattern on the target surface using a self-mixing laser diode (SMLD). By this measurement, it was confirmed that the speckle signal has its waveform independent of the target velocity, and has its averaged frequency directly proportional to the target velocity. So it will be possible to detect the velocity of the target transversely translating against the laser light beam using a compact measuring system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.183-186
• /
• 1988

The problem addressed in this paper is the accurate tracting of a dynamic target using outputs from a forward - looking infrared(FLIR) sensor as measurements. The important variations are 1) the spread of the target intensity pattern in the FLIR image plane, 2) target motion characteristics, and 3) the rms value and both spartial and temporal correlation of the back - ground noise. Based on this insights. design modifications and on - line adaptation copabilities are incorporated to enable this type of filter track highly maneuverable targets such as air-to-air missiles, with spatially distributed and changing image intensity profiles, against, background clutter.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2010

The purposes of this study are to review the Chinese traditional patterns and to apply one of them, the Peony Blossom pattern into modern textile designs for fashion For this purpose, first, the categories and symbolic meanings of the patterns existing in the Chinese traditional clothing from literature were reviewed. Second, the Peony Blossom patterns of Chinese traditional patterns from literature were reviewed and selected one of them, Third, authors applied the Peony Blossom pattern to creative textile design which would fit to appetite of people lived in modern society. The results were as follows: The patterns of Chinese traditional clothing could be classified as animal pattern, plant pattern, nature pattern, character pattern, lucky token pattern, geometric pattern and so on. All these patterns contained individual symbolic meaning, which varied according the different wearers. Moreover, it endows a peony blossom pattern of Chinese traditional patterns with modern style and purposes the textile design. The theme of the design is "Luxuriant Outing" with the concept of "Dream in Fantasy". The design target is the female born in the 1980's, that is, the target population between 20 and 30 years old. In addition, it is designed for the romantic one-piece. This paper perceives the national spirit revealed in the Chinese traditional patterns and designs with the combination of traditional culture and modernized technique of expression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.147-152
• /
• 2005

In this paper, we proposed a method for compressing the static video test patterns in high quality to test the picture quality in DTV. In our method, we use the fact that the generated bits and average quantization value have almost identical distribution characteristics per each GOP and we propose a new target bit allocation method suitable for compressing the static test pattern while the target bit allocation method in MPEG-2 TM5 is suitable for the moving picture. The proposed target bit allocation method is to maintain the high quality video continuously by using the normalized complexities which are updated or maintained by means of picture qualities at each GOP. Experiment result showed that the test pattern stream encoded by MPEG-2 software with the proposed algorithm had a stable bit rate and good video quality during the decoding process.

• Laser Solutions
• /
• v.3 no.3
• /
• pp.13-19
• /
• 2000

The stencil is a thin stainless sheet in which a pattern is formed, which is placed on a surface of plate to reproduce the pattern of electric circuit. Conventionally the stencil has been produced by etching process. This process has many anti-environmental factors. In this study, Nd : YAG laser cutting process has been applied for stencil manufacturing. The study is focused on estimating kerf width of laser cut stencil by E.B.P.(Error Back-Propagation). This algorithm is good for estimating target value from input value. In this paper, target value was kerf width, and input values were frequency, pulse width, cutting speed and laser power. E.B.P. after teaming input and target could estimate kerf width from some variables precisely.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.58-65
• /
• 2000

A target signal simulation method for passive sonar systems is introduced. The method uses multirate signal processing techniques to simulate moving target signals in the multi-path sound propagation environment by introducing Lloyd's mirror and Doppler effect. Time and frequency variation of target signal due to the target maneuvering is also considered to provide realistic ship signatures in the LOFAR gram so that the simulated target is used for sonar operator training. Synthesized target characteristics is analyzed and compared with real target signal in terms of interference pattern and frequency variation in the LOFAR gram.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.311-318
• /
• 2005

Grp78, discovered as one of the putative target genes of Hoxc8, is a highly conserved stress protein and functions as a molecular chaperone in the endoplasmic reticulum (ER). In order to see the stage-specific expression pattern of Grp78 during development, mouse embryos from day 7.5 to 17.5 p.c. were isolated, and RT-PCR as well as in situ hybridization was performed. When RT-PCR was performed using Grp78 specific primers, periodic expression pattern was detected. And also a region-specific expression pattern was detected with a strong expression in the trunk part of day 11.5 p.c. embryo, like that of Hoxc8. When in situ hybridization was performed, Grp78 was revealed to be expressed in the endoderm, somite, neuroepithelium cells of neural tube in early embryos. In the case of late embryos, Grp78 expression was detected in the liver, segmental bronchus within cranial lobe of lung, ossification center within the cartilage primordium of rib and vertebra, submandibular gland, as well as metanephros. These expression patterns are very much similar to those of Hoxc8. Since Hoxc8 has been reported to regulate apoptosis during organogenesis, it might be possible that the apoptotic function could have been conveyed through the expression of Grp78, implying that the Grp78 is one of the Hoxc8 downstream target genes.