• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.795-798
• /
• 2016

Transmission X-ray tubes based on carbon nanotube have attracted significant attention recently. In most of these tubes, tungsten is used as the target material. In this article, the well-known simulator Geant4 was used to obtain some of the tungsten target parameters. The optimal thickness for maximum production of usable X-rays when the target is exposed to electron beams of different energies was obtained. The linear variation of optimal thickness of the target for different electron energies was also obtained. The data obtained in this study can be used to design X-ray tubes. A beryllium window was considered for the X-ray tube. The X-ray energy spectra at the moment of production and after passing through the target and window for different electron energies in the 30-110 keV range were also obtained. The results obtained show that with a specific thickness, the target material itself can act as filter, which enables generation of X-rays with a limited energy.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2650-2659
• /
• 2022

The dense granular flow spallation target is a new target concept proposed for an Accelerator-Driven Sub-critical (ADS) system. In this paper, the beam-target configurations of a tungsten granular flow target for the ADS with a thermal power of 1 GW is explored. The beam profile options using different scanning methods are discussed. The critical geometry parameters are adjusted to investigate the performance of the granular target from the aspects of neutron efficiency, stability and temperature distribution in target medium. To figure out how the target under accident conditions would behave, different clogging conditions are induced in the simulation. The dynamic processes are analyzed and some important parameters such as abnormal temperature rise and beam cutoff time window are obtained. The response of the sub-critical reactor to a clogging accident is also investigated. It is indicated that the monitoring of the granular flow by the neutron detectors in the sub-critical core will be effective.

• 한국식품과학회지
• /
• 제23권1호
• /
• pp.88-92
• /
• 1991

스크류조합을 달리한 실험실용 twin-screw extruder를 사용하여 corn grit를 원료 투입량($30{\sim}60\;kg/hr$), 스크류 회전속도($200{\sim}400\;rpm$) 및 die hole 수($2{\sim}6$개) 범위에서 압출하면서 측정된 system parameters(압출온도, 기계적 에너지 소모율, 평균 체류시간)가 압출물의 특성을 나타내는 target parameters(수분 증발량, 수분 용해도지수 및 수분 흡착지수)에 미치는 영향을 스크류 조합별과 전체 실험결과를 다중회귀분석을 통하여 회귀식으로 나타내면, 스크류조합별 관계식에서는 상관계수가 0.90 이상 이었으며, 구획하지 않은 전체 회귀식에서는 0.80 정도의 상관계수를 보였다. 이상의 결과는 system analysis approach을 이용하면, 상이한 extruder사이의 조업자료 중 system parameters의 분석을 통하여 목적 제품의 특성을 예측할 수 있는 가능성을 보여준다고 생각된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1958-1960
• /
• 2001

In this paper, we propose the design methodology of target tracking system using the identification of TS fuzzy model based on genetic algorithm(GA) and RLS algorithm. In general, the objective of target tracking is to estimate the future trajectory of the target based on the past position of the target obtained from the sensor. In the conventional and mathematical nonlinear filtering method such as extended Kalman filter(EKF), the performance of the system may be deteriorated in highly nonlinear situation. In this paper, to resolve these problems of nonlinear filtering technique, the error of EKF by nonlinearity is compensated by identifying TS fuzzy model. In the proposed method, after composing training datum from the parameters of EKF, by identifying the premise and consequent parameters and the rule numbers of TS fuzzy model using GA, and by tuning finely the consequent parameters of TS fuzzy model using recursive least square(RLS) algorithm, the error of EKF is compensated. Finally, the proposed method is applied to three dimensional tracking problem, and the simulation results shows that the tracking performance is improved by the proposed method.

• ETRI Journal
• /
• 제36권5호
• /
• pp.704-713
• /
• 2014

Most natural language processing tasks depend on the outputs of some other tasks. Thus, they involve other tasks as subtasks. The main problem of this type of pipelined model is that the optimality of the subtasks that are trained with their own data is not guaranteed in the final target task, since the subtasks are not optimized with respect to the target task. As a solution to this problem, this paper proposes a consolidation of subtasks for a target task ($CST^2$). In $CST^2$, all parameters of a target task and its subtasks are optimized to fulfill the objective of the target task. $CST^2$ finds such optimized parameters through a backpropagation algorithm. In experiments in which text chunking is a target task and part-of-speech tagging is its subtask, $CST^2$ outperforms a traditional pipelined text chunker. The experimental results prove the effectiveness of optimizing subtasks with respect to the target task.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.299-306
• /
• 2005

To determine a guidance law which is suitable for Target Tracking System(TTS) of an underwater vehicle, the performance (hitting probability) of TTS were calculated with four different guidance schemes, considering underwater vehicle's manoeuvrability and characteristics of seeking equipment such as sonar To evaluate the performance of TTS with each guidance law, numerous target-tracking simulations of underwater vehicle were performed under the condition of target's various motion scenario. Furthermore, the effect of sonar characteristics to the performance of guidance law in TTS was studied by changing parameters of sonar such as frequency of ping and detecting error of target. The pursuit-tail guidance law showed the best performance among four different guidance laws. Complex motion of target from straight line to turning circle and zigzag movement, low frequency of sonar ping and large detecting error of target decreased the hitting probability.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3164-3170
• /
• 2021

The increasing interest that GEANT4 is gaining nowadays, because of its special capabilities, prompted us to address its reliability in neutronic calculation for the realistic and complex spallation target MEGAPIE of the Paul Scherrer Institute of Switzerland. In this paper we have specifically addressed the neutronic characterization of the active zone of this target. Three physical quantities are evaluated: neutron flux spectra and total neutron fluxes on target's z-axis, and the neutron yield as a function of the target's altitude and radius. Comparison of the obtained results with those of the MCNPX reference code and some experimental measurements have confirmed the impact of the geometrical and proton beam models on the neutron fluxes. It has also allowed to reveal the intrinsic influence of the code type. The resulting differences reach a factor of ~2 for the beam model and 4-18% for the other parameters cumulated. The analysis of the neutron yield has led us to conclude that: 1) Increasing the productivity of the MEGAPIE target cannot be achieved simply by increasing the thickness of the target, if the irradiation parameters are not modified. 2) The size of the spallation area needs to be redefined more precisely.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.299-309
• /
• 2013

고해상도 위성 SAR 영상은 주파수 특성, 안테나 설계 변수, 시스템 내부 잡음 및 간섭 신호에 영향을 많이 받으며, 특히 표적의 RCS(Radar Cross Section)에 따라 표적 특성의 품질이 달라지기 때문에 영상 예측을 위한 시뮬레이션이 복잡해진다. 본 논문에서는 STK(Systems Tool Kit)과 매트랩을 결합하여 작성한 SAR 운용 시뮬레이터를 구축하고, 추출된 데이터를 적용하여 SAR 시뮬레이션을 수행한다. 점 표적의 품질을 판별할 수 있는 중요 변수 특성을 분석하며, 향후 위성 SAR 영상의 검보정에 활용할 수 있음을 보인다. 또한, 위성의 궤도 위치에 따라 변화하는 표적의 RCS를 적용하고, 발생 가능한 RF 간섭 신호를 반영하여 SAR 영상에서의 표적물 품질변화 예측을 수행할 수 있는 방안을 제시한다.

• 대한원격탐사학회지
• /
• 제28권4호
• /
• pp.369-392
• /
• 2012

현재까지 초분광영상을 위한 다양한 표적탐지 알고리즘이 개발 및 사용되고 있다. 그러나 표적탐지 알고리즘의 비교 및 검증 기준으로 1~2가지 영상에 적용한 탐지정확도 만을 사용하고 있어, 사용자 입장에서 그 적용성을 평가하는 데에는 한계가 있다. 본 연구의 목적은 초분광영상에 대한 표적탐지 알고리즘의 적용성을 체계적으로 분석하는 것이다. 이를 위하여 표적, 배경, 영상의 분광적 또는 복사적 특성에 관련된 5가지 기준 인자들을 정의하였고, 각 인자의 변이에 따른 6가지 기존 표적탐지 알고리즘의 탐지정확도 변화를 비교하였다. 이와 더불어 영상 크기에 따른 각 알고리즘의 처리시간을 비교하였다. 그 결과 탐지정확도 측면에서는 기준인자에 따라 적용성이 높은 알고리즘의 종류가 다르게 나타났다. 처리시간은 2차 통계값 기반 알고리즘이 다른 알고리즘에 비해 매우 크게 나타났다. 탐지정확도와 처리시간을 종합적으로 고려한 결과 사용하는 영상과 표적 그리고 배경의 특성에 따라 적용성이 높은 알고리즘의 종류가 다른 것으로 나타났다. 따라서 초분광영상에 대한 기존 표적탐지 알고리즘의 적용성은 자료의 특성 및 배경과 표적의 공간적 분광적 관계에 따라 다르게 나타나므로, 사용하는 자료의 특성과 목적에 따라 적용하는 표적탐지 알고리즘의 종류가 달라질 필요가 있다.