• Journal of Korea Society of Waste Management
• /
• v.34 no.7
• /
• pp.685-696
• /
• 2017

This study focuses on computational particle fluid dynamics (CPFD) modeling for the fast pyrolysis of biomass in a conical spouted bed reactor. The CPFD simulation was conducted to understand the hydrodynamics, heat transfer, and biomass fast pyrolysis reaction of the conical spouted bed reactor and the multiphase-particle in cell (MP-PIC) model was used to investigate the fast pyrolysis of biomass in a conical spouted bed reactor. A two-stage semi-global kinetics model was applied to model the fast pyrolysis reaction of biomass and the commercial code (Barracuda) was used in simulations. The temperature of solid particles in a conical spouted bed reactor showed a uniform temperature distribution along the reactor height. The yield of fast pyrolysis products from the simulation was compared with the experimental data; the yield of fast pyrolysis products was 74.1wt.% tar, 17.4wt.% gas, and 8.5wt.% char. The comparison of experimental measurements and model predictions shows the model's accuracy. The CPFD simulation results had great potential to aid the future design and optimization of the fast pyrolysis process for biomass.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.1817-1839
• /
• 2024

To solve the problem of insufficient recognition of key nodes in the existing software defect detection process, this paper proposes a key node recognition algorithm based on node expansion degree and improved K-shell position, shortened as SDD_KNR. Firstly, the calculation formula of node expansion degree is designed to improve the degree that can measure the local defect propagation capability of nodes in the software network. Secondly, the concept of improved K-shell position of node is proposed to obtain the improved K-shell position of each node. Finally, the measurement of node defect propagation capability is defined, and the key node recognition algorithm is designed to identify the key function nodes with large defect impact range in the process of software defect detection. Using real software systems such as Nano, Cflow and Tar to design three sets of experiments. The corresponding directed weighted software function invoke networks are built to simulate intentional attack and defect source infection. The proposed SDD_KNR algorithm is compared with the BC algorithm, K-shell algorithm, KNMWSG algorithm and NMNC algorithm. The changing trend of network efficiency and the strength of node propagation force are analyzed to verify the effectiveness of the proposed SDD_KNR algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.518-520
• /
• 2012

In this paper, based on XML for Logistics EDI system is introduced. XML-based EDI system for the conversion to electronic documents without using a script file, reads and writes to the binary form of the electronic document when the document scanner has been designed and implemented for use with the mappers. In addition, the conversion rules between electronic mapping tool for graphical representation has been designed and implemented. Therefore, the proposed XML-based EDI system for Logistics XML, with a particular vertex of the existing EDI electronic document processing systems and compared to the improvement of user friendliness and speed, portability between other systems filter out nicotine and tar and absorb moisture B2B Gateway system will be used widely.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.406-412
• /
• 2015

Unidirectional carbon/carbon (C/C) composites were manufactured using phenolic resins as a precursor of the carbonized matrix throughout a one-step manufacturing process. Also, molybdenum oxide ($MoO_3$) and binder pitches were impregnated with phenolic resins to improve the bulk density and mechanical property of the C/C composites. In this study, the influence of $MoO_3$ and binder pitches on mechanical properties of the C/C composites were investigated by measuring flexural strength (${\sigma}_f$) and interlaminar shear strength (ILSS). The results show that the enhancement of interfacial adhesions between the fibers and matrix resins of the C/C composites with $MoO_3$ and binder pitches which led to the improvement of mechanical properties of the C/C composites. This indicates that the presence of $MoO_3$ and binder pitches in C/C composites can develop the graphite structure and increase the bulk density.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.701-705
• /
• 2003

The study was done to determine the effect of storage property and qualities of soybean sauce and paste by adding different amount of pyroligneous liquor obtained by supercritical fluid extraction(SFE). Purified pyroligneous liquor obtained by SFE at $40^{\circ}C$/110bar contained ${\rho}$-cresol, o-cresol and m-cresol food sterilizers, but no toxic substances such as tar, scorched, furfuraland and monophenol. Thus pyroligneous liquor was suitable as natural food preservative. In case of soybean sauce, pyroligneous liquor was tested for the possibility of utilizing it as natural food preservative to prevent film formation on soybean sauce for the test period of 15days at $30^{\circ}C$. In case of paste, pyroligneous liquor was tested for the possibility of utilizing it as natural food preservative to inhibit browning on paste for the test period of 60days at $30^{\circ}C$. As a result, purified pyroligneous liquor offered a promising way of improving the quality and storage property of soybean sauce and paste .

• Journal of the Korean Society of Tobacco Science
• /
• v.12 no.1
• /
• pp.19-27
• /
• 1990

To evaluate tobacco quality, several mathods including sensory test, or measurement of some toxic compounds such as tar, nicotine and carbon monoxide in cigarette smoke have been used. However, many detrimental effects of smoking on the physiological functions including respiratory system reported were turned out to be the action of reactive oxygen species. Therefore, the amounts of oxygen free radicals such as superoxide, hydroxyl radical, even hydrogen peroxide in the cigarette smoke are thought the very important factors. In the present study, we have determined the generation of superoxide and the content of hydrogen peroxide using superoxide dismutase and catalase in the gas and particulate phases obtained from cigarette smoke, respectively. In the aqueous extracts of total particulate materials, suproxide and hydrogen peroxide were detected, and there was an excellent correlation between oxygen tint of oxygen free radicals in cigarette smoke may be a useful index for evaluation of cigarette quality in the aspect of smoking and health.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.62-62
• /
• 2001

The cigarette ventilation affects not only the amount of tar and nicotine delivery by a cigarette, but also the composition of the smoke. Therefore, it is important to stabilize of variability in cigarette ventilation that would be affected by changes in cigarette components. This work was conducted to determine the major factors that influence the cigarette ventilation and also to provide fundamental informations for improving the uniformity of cigarette performances. To evaluate the effect of cigarette ventilation as a dependant variable, the three independent factors were the air permeability of plugwrap, tipping paper and the filter pressure drop. We determined the effect of paper permeability on ventilation variability and the optimum condition in combinations of independent factors. The mean of cigarette ventilation was increased as plugwrap permeability increases, particularly at 26,000 CU. However, it was exhibited that standard deviation and coefficient of variation of the cigarette ventilation were decreased with increasing plugwrap permeability. At the 600 CU and 1,200 CU of tipping paper permeability, process capability index (Cp) of the cigarette ventilation increased as plugwrap permeability increases. Following the optimum condition of cigarette ventilation induced by fitted regression equation, one was to optimize 50% ventilation level is by combination with plugwrap permeability of 16,000 CU, tipping paper permeability of 810 CU, filter pressure drop of 319 mm$H_2O$, respectively.

• Clean Technology
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2011

Scientists and engineers have altered the properties of materials such as metals, alloys, polymers, ceramics, and so on, to suit the ever changing needs of our society. Man-made engineering materials generally demonstrate excellent mechanical properties, which often tar exceed those of natural materials. However, all such engineering materials lack the ability of self-healing, i.e. the ability to remove or neutralize microcracks without intentional human interaction. The damage management paradigm observed in nature can be reproduced successfully in man-made engineering materials, provided the intrinsic character of the various types of engineering materials is taken into account. Various self-healing ptotocols that can be applied for the organic materials such as polymers, ionomers and composites can be developed by utilizing suitable chemical reactions and physical intermolecular interactions.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.12-19
• /
• 2006

Rice straw is one or the main renewable energy sources in Korea. Bio-oil is produced from rice straw with a lab-scale equipment mainly with a fluidized bed and a char removal system. It was investigated how the reaction temperature affected the production of bio-oil and the efficiency of a char removal system. To elucidate how the temperature depended on the production of bio-oil, experiments were conducted at $466^{\circ}C,\;504^{\circ}C\;and\;579^{\circ}C$, respectively. The mass balance was established in each experiment, and the produced gas and oil were analyzed with the aid of GCs and a GC-MS system. The char removal system is composed of a cyclone and a hot filter. Tn the experiments, we observed that the production of bio-oil was decreased with temperature, and the bio-oil contained very useful chemicals.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.205-209
• /
• 2018

The spectral composition of light can affect the growth and biochemical composition of photosynthetic microalgae. This study examined the use of light filtering through a solution of soluble colored additives, a cost-effective method to alter the light spectrum, on the growth and lipid production of an oleaginous microalga, Nannochloropsis gaditana (N. gaditana). Cells were photoautotrophically cultivated under a white light emitting diode (LED) alone (control) or under a white LED that passed through a solution of red and yellow color additive (4:1 ratio) that blocked light below 600 nm. The specific growth rate was significantly greater under filtered light than white light ($0.2672d^{-1}$ vs. $0.1930d^{-1}$). Growth under filtered light also increased the fatty acid methyl ester (FAME) yield by 22.4% and FAME productivity by 80.0%, relative to the white light control. In addition, the content of saturated fatty acids was greater under filtered light, so the biodiesel products had better stability. These results show that passing white light through an inexpensive color filter can simultaneously enhance cellular growth and lipid productivity of N. gaditana. This approach of optimizing the light spectrum may be applicable to other species of microalgae.