• 청정기술
• /
• 제11권2호
• /
• pp.83-90
• /
• 2005

본 연구에서는 크롬 탄닝을 대체할 수 있는 환경친화적인 유제 공정 처리제 (폴리머계, 폴리 페놀계, 폴리 레진계)를 개발하고, 이를 제혁 공정에 적용하여 혁의 물리적 특성에 미치는 영향 및 Cr, total nitrogen, COD, SS 등의 환경영향평가로 제혁 공정의 청정화를 위한 기초 연구를 진행하였다.

• BMB Reports
• /
• 제44권11호
• /
• pp.741-746
• /
• 2011

Tanning ability is important, because it represents the ability of the skin to protect itself against ultraviolet (UV) radiation. Here, we sought to determine genetic regions associated with tanning ability. Skin pigmentation was measured at the outer forearm and buttock areas to represent facultative and constitutive skin color, respectively. In our study population consisting of isolated Mongolian subjects, with common histories of environmental UV exposure during their nomadic life, facultative skin color adjusted by constitutive skin color was used to indicate tanning ability. Through linkage analysis and family-based association tests of 345 Mongolian subjects, we identified 2 potential linkage regions regulating tanning ability on 5q35.3 and 12q13.2, having 6 and 7 significant single nucleotide polymorphisms (SNPs), respectively. Those significant SNPs were located in or adjacent to potential candidate genes related to tanning ability: GRM6, ATF1, WNT1, and SILV/Pmel17.

• 청정기술
• /
• 제11권1호
• /
• pp.51-56
• /
• 2005

본 연구에서는 피혁 제조 공정별 발생 폐수중 탄닝 공정에 사용되고 있는 크롬을 대체하기 위해서 전분 가수분해물인 starch을 원료로 알데하이드 함량이 다른 여러 가지 dexrin dialdehyde (DAS)를 제조하였다. 수용액상에서 산화제를 변량 하면서 (glucose에 대한 산화제의 첨가율은 1:0.3에서 1:1), 반응 조건을 달리하여 다양한 실험을 진행하였고, DAS 자체의 물성을 파악하고 가죽과의 반응 특성을 확인하였다. 제조한 DAS는 가죽의 아미노기와 결합하여 일반적인 알데하이드 탄닝제 (포름알데하이드, 그루타알데하이드)와 유사한 탄닝 특성을 보였다.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.41-50
• /
• 2009

Design of experiments (DoE) concept was successfully applied to determine the optimum processing conditions that yield maximum % exhaustion for berberine interaction with synthetic tanning agent pretreated polyamide substrates. The potential of synthetic tanning agent to provide anionic sites on the polyamide for berberine interaction which is cationic in nature was tested to increase the % exhaustion of berberine in this article. Experiments were designed according to Central Composite Rotatable Design (CCRD). The three factors for synthetic tanning agent pretreatment and two factors for berberine interaction each at five different levels, including central and axial points were considered. Experiments were conducted in a laboratory scale infra-red treatment instrument according to CCRD. For each response, second order polynomial models were developed using multiple linear regression analysis incorporating linear, interactions and squared effects of all variables and then optimized. The significance of the mathematical model developed was ascertained using Excel regression (solver) analysis module. Analysis of variance (ANOVA) was performed to check the adequacy and accuracy of the fitted models. The response surfaces and contour maps showing the interaction of process variables were constructed. Applying Monte Carlo simulation, response surface and contour plots, optimum operating conditions were found and at this optimum point, % exhaustion of 81% and 74% respectively for synthetic tanning agent pretreatment and berberine interaction were observed and subsequently the results were experimentally investigated.

• Environmental Engineering Research
• /
• 제22권2호
• /
• pp.149-156
• /
• 2017

Chromium(III) recovery from tanning wastewater by means of adsorption on activated carbon and elution with sulfuric acid was studied. Tests were carried out at laboratory scale on an effluent of industrial origin. Initially, proteinaceous materials and fats were separated via sieving followed by ultrafiltration. The chemical composition of the sample thus precleansed was (in g/L): 1.09 chromium(III); 10.36 sulfate; 11.10 sodium; 9.57 chloride; 0.40 proteinaceous materials; and 0.20 fats. Adsorptions were made at 20, 30, and $40^{\circ}C$, establishing what temperature favored chromium(III) uptake. At $40^{\circ}C$, the maximum cation fixation was 40.2 mg/g, and the lowest content in an equilibrium solution was 3.9 mg/L. As regards sodium, chloride, and sulfate, the concentrations before and after the treatment were similar. Likewise, it was found that protons were also retained, modifying the pH of the liquid medium. Adsorption isotherms were analyzed using the Langmuir, Temkin, and Freundlich models. Finally, the extraction of the adsorbed tanning agent with sulfuric acid was evaluated. A recovery of 96.5% was achieved with 0.9 N at $70^{\circ}C$ (13.23 g/L $Cr^{3+}$; 42.98 g/L sulfate; and 0.40 g/L NaCl).

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.82-85
• /
• 1997

To develop an active material for skin darkening, we examined the effect of 300 plants on tyrosinase activity and found only Caesalpinia sappan has an ability to increase tyrosinase activity highly and melanin contents in B-16 melanoma cells. A compound increasing tyrosinase activity and melanin production was isolated from Caesalpinia sappan Lignum. Brazilin was identified as a new active agent. Brazilin increases the tyrosinase activity and malanin production of B-16 melanoma cells. In conclusion, it seems that brazilin cal be used as a new sunless tanning agent.

• 청정기술
• /
• 제10권1호
• /
• pp.27-35
• /
• 2004

현재 국내 피혁 업체에서는 대표적인 공해 산업으로 인식되어 있는 피혁 산업의 환경 문제를 해결하기 위하여 심혈을 기울이고 있다. 피혁 선진국에서는 피혁 전문 연구소 및 약품회사, 피혁 업체가 공동으로 대응하여 기술 개발 및 진단, 친환경 약품을 개발하고자 노력하고 있으며 본 연구는 청정 피혁 생산을 위한 저크롬 탄닝 공정 기술 보급 사업을 통하여 환경 문제의 해결하기 위하여 진행되었다. 특히 폐수나 고형폐기물의 형태로 존재하는 크롬의 처리에 환경적, 경제적 문제점으로 인해서 크롬을 적게 사용하는 저크롬 유제 공정과 크롬의 사용을 완전히 배제한 비크롬 유제 공정 기술을 대표적인 4개의 대상기업을 선정하여 기술 이전을 실시한 대표적인 친환경 제혁 기술을 소개 하고자 한다. 아울러 경량성 피혁 소재의 개발을 위해서 비금속을 이용하는 연구를 진행하고 있다.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.12-16
• /
• 2007

Exhaustion increase using cationic dyes on polyamide fibers are not easy work due to the limited amounts of the functional end groups(-COOH) in the substrates. Therefore, to enhance dye exhaustion, polyamide fibers are required to be modified onto desired surface properties of the fibers using anionic bridging agent. In this study, synthetic tanning agent for pre-treatment finishing and cationic dye(berberine chloride) for dyeing of polyamide fibers were used. For surface modification, polyamide fibers were pre-treated with synthetic tanning agent at various concentrations and temperatures. The increased concentration and temperatures of synthetic tanning agents had resulted in exhaustion increase. The modified polyamide substrates skewed increased cationic dyeing exhaustions and the corresponding dyeing results from treated samples represented higher exhaustion properties than those of non-treated counterpart. The increased dyeing effects of cationic dye can be attributed to the supplied ionic interaction and electrostatic attraction sites on the surface of polyamide substrates.

• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.417-425
• /
• 2009

The purpose of this study was to investigate the whitening effect of Angelicae dahuricae Radix water extract (ADWE) by its application on artificial tanning spots which were induced by 1,500 $mJ/cm^2$ of UVB radiation on the backs of brown guinea pigs weighing approximately 450~500 g. Thirty ${\mu}l$ of ADWE, at each application, were applied twice a day, 5 days a week, for 8 weeks to the guinea pigs. The artificial tanning spots were divided into 3 groups which were vehicle control group [propylene glycol: ethanol: water (5:3:2)], positive control group (2% hydroquinone) and experimental group (2% ADWE). The visible whitening effect and changes in melanin index were evaluated once a week. On completion of the experiment, the animals were sacrificed under anesthetization, and the artificial tanning spots were excised by biopsy punch and stained with Hematoxylin and Eosin (H&E) to observe histological change and also stained with Fontana-Masson's silver (F-M) and S-100 to observe melanin pigmentation and melanocytes. In the gross observation, the experimental group showed higher pigmentation than the positive control group but lower pigmentation than the vehicle control group. Histological observation confirmed that ADWE had a positive whitening effect by showing a lower distribution of melanin and melanocytes in the epidermis of experimental group than in the vehicle control group.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.18-26
• /
• 2003

Nylon 6.6 was treated with anionic synthetic tanning agent at different pH values, temperatures and liquor ratios to determine exhaustion properties. Treatments using syntan were conducted to the undyed nylon 6.6 fiber and three acid dyeings and then samples of the bath solution were subjected to HPLC analysis. Mass analysis was considered to determine the syntan components. In addition, the effect of applications using syntan and syntan/cation in improving the stain resistance was observed. The optimum treatment condition of syntan was achieved and the major component of syntan, being exhausted to the nylon substrates, was determined. In terms of stain blocking effect, a significant improvement was achieved by the syntan and syntan/cation treatments.