• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.44-49
• /
• 2011

In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. In Gen-2 RFID system, if the slot-count size varies during a query round due to the collisions, a new query round begins with a QueryAdjust command. Anti-collision algorithm of Gen-2 RFID system is simple. But, it has the tag starvation problem that a tag may never be successfully identified because its responses always collide with others. Therefore, this paper proposes a scheme to guarantee the fair identification delay. In the proposed scheme, if the slot-count value changes due to the collisions, the reader broadcasts a CollisionRound command to begin a collision round. During the collision round, the reader identifies only tags that occurred collision during the previous query round.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.41-48
• /
• 2006

An anti-collision algorithm is very important in the RFID system because it decides tag identification time and tag identification accuracy. We propose improved anti-collision algorithms using Bin slot in RFID system. In the proposed algorithms, if the reader memorizes the Bin slot information, it can reduce the repetition of unnecessary PingID command and the time to identify tags. If we also use ScrollA11ID command in the proposed algorithm, the reader knows the sequence of collided E bits. Using this sequence, the reader can reduce the repetition of PingID command and tag identification time. We analyze the performance of the proposed anti-collision algorithms and compare the performance of the proposed algorithms with that of the conventional algorithm. We also validate analytic results using simulation. According to the analysis, for the random tag n, comparing the proposed algorithms with the conventional algorithm, the performance of the proposed algorithms is about $130\%$ higher when the number of the tags is 200. And for the sequential tag ID, the performance of the conventional algorithm decreases. On the contrary, the performance of the proposed algerian using ScrollA11ID command is about $16\%$ higher than the case of using random tag ID.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1891-1904
• /
• 2013

In RFID System, one of the problem that we must slove is to devise a good anti-collision algorithms to improve the efficiency of tag identification which is usually low because of tag collision. Among of the existing RFID anti-collision algorithm, BS (Binary Search) algorithm, though simple, has a disadvantage that the stage 0f times used to identify the tags increase exponentially as the number of tags does. In this Paper, I propose a new anti-collision algorithm called Multi-collision reflected frame which restricts the number of stages and decided bit. Since the proposal algorithm keep the length size of UID and density of total tag when have 100%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.25-32
• /
• 2007

In this paper, we propose the Group Separation Algorithm for RFID Tag Anti-Collision. We study the RFID Tag anti-collision technique of ALOHA and the anti-collision algorithm of binary search. The existing technique is several problems; the transmitted data rate included of data, the recognition time and energy efficiency. For distinction of all tags, the Group Separation algorithm identify each Tag_ID bit#s sum of bit #1#. In other words, Group Separation algorithm had standard of selection by collision table, the algorithm can reduce unnecessary number of search even than the exisiting algorithm. The Group Separation algorithm had performance test that criterions were reader#s number of repetition and number of transmitted bits for understanding tag. We showed the good performance of Group Separation algorithm better than exisiting algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.1-9
• /
• 2007

in this paper, we propose the Adaptive Decision Algorithm for RFID Tag Anti-Collision. We study the RFID Tag anti-collision technique of ALOHA and the anti-collision algorithm of binary search. The existing technique is several problems; the transmitted data rate included of data, the recognition time and energy efficiency. For distinction of all tags, the Adaptive Decision algorithm identify smaller one ,each Tag_ID bit's sum of bit '1'. In other words, Adaptive Decision algorithm had standard of selection by actively, the algorithm can reduce unnecessary number of search even than the exisiting algorithm. The Adaptive Decision algorithm had performance test that criterions were reader's number of repetition and number of transmitted bits for understanding tag. We showed the good performance of Adaptive Decision algorithm better than exisiting algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.202-207
• /
• 2013

RFID technology is applied to port logistics applications since it monitors objects wirelessly without line of sight and constructs ubiquitous system with low cost. Changes of stock status in the warehouse environment make the technology more important for managing such frequent storing and un-storing. Although the RFID has beneficial characteristics of low cost and low complexity, simultaneous responses of RFID tags cause tag identification collision due to absence of elaborate medium access control scheme. Several algorithms have been proposed to overcome the tag collision problem. However, it is difficult to adopt the methods to the logistics systems that has varying loads since there was no consideration on RFID tag's mobility. Therefore, we propose an efficient RFID tag anti-collision protocol, and simulation results demonstrate performance improvement by using the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.358-364
• /
• 2007

RFID, Radio Frequency Identification, technology is a contactless automatic identification technology using radio frequency. For this RFID technology to be widely spread, the problem of multiple tag identification, which a reader identifies a multiple number of tags in a very short time, has to be solved. Up to the present, many anti-collision algorithms have been developed in order to solve this problem, and those can be largely divided into ALOHA based algorithm and tree based algorithm. In this paper, two new anti-collision algorithms combining the characteristics of these two categories are presented. And the performances of the two algorithms are compared and evaluated in comparison with those of typical anti-collision algorithms: 18000-6 Type A, Type B, Type C, and query tree algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.98-104
• /
• 2012

In RFID Systems, collisions between multiple tags frequently arise due to simultaneous responses from multiple tags using the same communication channel. Most of anti-collision protocols such as QT regard these collisions as useless cycles, thereby wasting the channel bandwidth. In this paper, we propose a new anti-collision protocol, namely ASP (Adjustable splitting by patterns of collisions) protocol that utilizes the patterns collision for noticeable performance enhancements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.19-25
• /
• 2012

In evaluating the performance of RFID systems, the tag anti-collision arbitration has been considered to be an important issue. For BT(Binary Tree) and ABS( Adaptive Binary Splitting) protocols, the so-called capture effect, which presumably happens frequently in the process of readers' receiving messages from multiple tags, can lead to some failures in detecting all tags in BT and ABS. In this paper, we propose a new anti-collision protocol, namely FTB (Feedback TagID with Binary splitting), which can solve the aforementioned problem and improve the performance.