• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.1-8
• /
• 2005

Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue life of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue life on base metal specimens or solution annealed specimens showing that the fatigue lift was almost the same. The maximum stresses of X, Y, and Z axis direction showed about $2.12{\times}10^2MPa,\;4.40{\times}10^2MPa\;and\;1.32{\times}10^2MPa$ respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5{\sim}10%$ than that of the experiment result showing that the longer fatigue crack length the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.182-187
• /
• 2012

In making emulsion-type pressure sensitive adhesive (PSA), environmentally friendly sorbitan nonionic surfactants having various chemical structures were prepared and used to find out the possibility of substituting the traditional nonyl-phenyl nonionic surfactant (NPE40) by comparing their adhesive properties. Results exhibited that the PSA used NSR10-series and Tween 60 showed better adhesive properties in initial ball tack, peel strength and holding power than those of NPE40. The reason for this is their particular chemical structure and the proper ratio of hydrophobic groups to the ethylene oxide groups.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.136-142
• /
• 2017

Using various compositions of thermally conductive inorganic fillers with boron nitride (BN) and aluminum oxide ($Al_2O_3$), solventless UV-curable thermally conductive acrylic pressure sensitive adhesives (PSAs) were prepared. The base of the PSAs consists of 2-ethylhexyl acrylate, 2-hydroxyethyl acrylate, and isobornyl acrylate.The compositions of the thermally conductive inorganic fillers were 10, 15, 20, and 25 phr in case of BN, and 20:0, 15:5, 10:10, 5:15, and 0:20 phr in case of $BN/Al_2O_3$. The adhesion properties like peel strength, shear strength, and probe tack, and the thermal conductivity of the prepared PSAs were investigated with different thermally conductive inorganic filler contents. There were no significant changes in photo-polymerization behavior with increasing BN or $BN/Al_2O_3$ content. Meanwhile, the conversion rate and transmittance of the PSAs decreased and their thermal stabilities increased with increasing BN content. Their adhesion properties were also independent of the BN or $BN/Al_2O_3$ content. The dispersibility of BN in the acrylic PSAs was better than that of $Al_2O_3$ and it ranked the thermal conductivity in the following order: BN > $BN/Al_2O_3$ > $Al_2O_3$.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.199-204
• /
• 2014

To prepare acrylic pressure sensitive adhesives (PSAs), quaternary copolymer syrups were photopolymerized from 2-ethylhexyl acrylate and 2-hydroxyethyl acrylate as default constituents and isobornyl acrylate and tetrahydrofurfuryl acrylate (THFA) as variable constituents. After polymerization, 1,6-hexanediol diacrylate and photoinitiator were added and then crosslinked by UV-irradiation to prepare the PSAs. The characteristics of the syrup such as viscosity, molecular weight, and solid content were investigated. As increasing THFA contents, the relationship between molecular weight and solid content of the syrup was reciprocal. Also, the relationship between peel strength and surface energy of the PSAs showed the same tendency. All the PSA samples showed high transmittance (more than 92%), low haze (less than 1.0%) and low color-difference (less than 1.0).

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.156-161
• /
• 2020

Waterborne pressure sensitive adhesives (PSA) has been received much attentions from both academia and industries as an environmental friendly-technology because it can significantly reduce use of hazardous organic volatile solvents. However, in the process of the mass production of waterborne PSAs, hazardous phenol type amphiphilic compounds have essentially been used as surfactants for the emulsion polymerization. For the reason, tremendous research efforts have been made to develop environment-friendly organic surfactant which can replace the phenol type surfactants. In this study, we verify the potential of a new class of surfactants based on the styrenated phenol derivatives as an alternative to the phenol type surfactants.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.29-35
• /
• 2006

This stud y was conducted to investigate the bonding strength of plywood bonded with fatty acid-glycerol-pMDI adhesives with equivalent ratios of 1:1:2, 1:1:3, 1:1:4, 1:1:5, and 1:1:6. With veneer moisture contents of 0%, 3%, 5%, 8% and 15%, the bonding strengths exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$ with values of $13.7kgf/cm^2$, $11.6kgf/cm^2$, $11.2kgf/cm^2$, $9.8kgf/cm^2$, and $7.4kgf/cm^2$, respectively at fatty acid-glycerol-pMDI ratio of 1:1:2. With veneer moisture content of 30%, the bonding strengths exceeded th e requirement of Korean plywood standard of $7.0kgf/cm^2$, when fatty acid-glycerol-pMDI ratios were 1:6. Finally for satisfying the Korean plywood standard, the ratio of MDI in fatty acid-glycerol-pMDI should be increased with increasing of veneer moisture content.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.108-108
• /
• 2009

Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.226-236
• /
• 2010

UV irradiated acrylic pressure sensitive adhesives(PSAs) are prepared to be used for thermal pad in plasma display panel(PDP). The effect of the chemical structure of side-chain in comonomer and of crosslinking agent on wet-out property of acrylic PSAs in wide temperature range were investigated. The correlationship between viscoelastic behavior and adhesion properties, such as tack and peel strength, was also studied. The experimental results supported that wet-out and adhesion properties of acrylic PSAs were enhanced inversely proportional to side-chain length of comonomer in wide temperature range. The peel energy clearly increased in acrylic PSAs prepared by using di(ethylene glycol) dimethylacrylate (DEGDMA) for crosslinking agent. The results might be due to the difference in the glass transition temperature and viscoelastic behavior of acrylic PSAs.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.4
• /
• pp.373-378
• /
• 2015

Objective : To determine the advantages of parietal approach compared to Kocher's point approach for spontaneous, oval-shaped intracerebral hemorrhage (ICH) with expansion to the parietal region. Methods : We divided patients into two groups : group A had burr holes in the parietal bone and group B had burr holes at Kocher's point. The hematoma volume, Glasgow coma scale (GCS) score, and modified Barthel Index (mBI) score were calculated. At discharge, we evaluated the patients' Glasgow outcome scale (GOS) score, modified Rankin Scale (mRS) score, motor grade, and hospitalization duration. We evaluated the patients' mBI scores and motor grades at 6 months after surgery. Results : The hematoma volume in group A was significantly less than that in group B on postoperative days 1, 3, 5, 7, 14, and 21. Group A had significantly higher GCS scores than did group B on postoperative days 1 and 3. Group A had higher mBI scores postoperatively than did group B, but the scores were not significantly different. No differences were observed for the GOS score, mRS score, motor grade at discharge, or duration of hospitalization. The mBI score of group A at 6 months after surgery was significantly higher, and more patients in group A showed muscle strength improvement. Conclusion : In oval-shaped ICH with expansion to the parietal region, the parietal approach is considered to improve the clinical symptoms at the acute phase by removing the hematoma more effectively in the early stages. The parietal approach might help promote the long-term recovery of motor power.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.491-495
• /
• 2014

Pressure sensitive adhesive (PSA) based on 2-ethylhexyl acrylate (2-EHA)/acrylic acid (AA) copolymer was synthesized using different photoinitiators. Results showed that PSA with Irgacure$^{(R)}$651 (benzyldimethylketal) and Irgacure$^{(R)}$184(1-hydroxy-cyclohexylphenyl ketone) proved to be good for adhesion properties. This may be attributed to strong absorption near 350 nm wavelength and also high solubility in monomer mixtures. The addition of Irgacure$^{(R)}$819, bisacylphosphine oxides as a photoinitiator caused cohesive failure with high loading in a peel test owing to the additional radical formation. It is assumed that the insoluble photoinitiator reacts with oxygene, which may act as a hydrogen donor.