• 제목/요약/키워드: t-z model

검색결과 168건 처리시간 0.025초

수온과 개체크기에 따른 양식산 미더덕, 흰멍게, 진주담치의 여수율 (Filtering Rate with Effect of Water Temperature and Size of Two Farming Ascidians Styela clava and S. plicata, and a Farming Mussel Mytilus edulis)

  • 김용술;문태석
    • 한국수산과학회지
    • /
    • 제31권2호
    • /
    • pp.272-277
    • /
    • 1998
  • 근년에 내만성 굴양식장의 생산성이 저하함에 따라 대체종으로 미더덕과 횐멍게가 주목되면서 이 종들의 생태적 지위가 기존의 양식굴과 상충되는지 여부를 알아보기 위한 일련의 조사계획의 하나로서 여수율을 조사하였으며, 조사결과와 Kim (1995)의 양식굴의 여수율 ($\ast$)을 비교 검토하였다. 1. 폐쇄계에서 해수수온 $10^{\circ}C,\;15^{\circ}C,\;20^{\circ}C,\;25^{\circ}C,\;29^{\circ}C$일때 시간에 따른 현탁색소의 제거율을 측정하고, Kim (1995)의 계산식을 사용하여 여수율을 계산하였다. 현탁색소는 neutral red를 사용하였으며, 22mm 흡수셀을 사용하여 440nm에서 초기흡광도 $0.25\~0.30$을 나타내는 농도를 사용하였다. 2. 여수율은 한시간동안 실험생물 1개체가 여수하는 양을 그 개체의 건조중량으로 나누어서 단위시간당 단위건조육중량당 여수량 (${\ell}/gDW/hr$)으로 산출하고, 이것이 개체 건조육중량과 수온에 의하여 받는 영향을 회귀경향식으로 해석하여, 종별 개체여수율 ($F,\;{\ell}/hr/animal$) 모형으로 다음과 같은 결과를 얻었다. 4. 종별로 수확시의 수온과 개체 평균중량 자료를 사용하여 연승 1대 (100m)당 집단 여수율을 계산한 결과는 다음과 같았다.

  • PDF

효율적인 환자간호를 위한 간호전달체계 모형 개발에 관한 연구 (A Study about Developing Care Delivery System of Providing Efficient Patient Care)

  • 김정자;황경자;김숙현;이계숙;이정숙;김인영;조윤희
    • 대한간호
    • /
    • 제35권3호
    • /
    • pp.61-76
    • /
    • 1996
  • The purpose of this study was to develop a nursing care delivery system which can provide patient focused care and increase satisfaction for both patients and nurses. This study was a quasi-experimental study to test the effectiveness of direct / indirect nursing care hours, patient satisfaction, nurse's job satisfaction, and the difference of the length of stay between model and control group. Control group data were collected from 100 patients who had lumbar disease in the neuro-surgical unit and model group data were from 66 patients who didn't have family residents from August 21, 1995 to February 29, 1996. Model unit was operated by modified PPM(Professional Practical Model) system for 3 months from December 1, 1995 to February 29, 1996. Working committee empowered nurses to make a decision to provide increased opportunities for autonomy, accountability, and control over the environment in which they deliver care. Satisfaction survey was done twice and analyzed by the SPSS program. The results of the study were as follows; 1. Mean direct nursing care hours of the model group was 90.47 minutes as it was 28.04 in the control group which shows significant statistical difference (t=-18.0, P=0.000). 2. Patient satisfaction to nursing care of in the model group was significantly higher than the control group (t=-6. 77, P=0.000) and it apples to the all subcategories, too. 3. Nurse's job satisfaction shows the significant increase in the model group than the control group(Z=-3.0405, p=0.0024). 4. There was no statistical difference between 2 groups in average length of stay except for the post-op patient which shows 5.4 days less in the model group. This study shows that patient satisfaction and nurse's job satisfaction were increased and length of stay was decreased in the model group. Even though this new developed Patient - Nurse Oriented Model can provide nursing with the opportunity to improve patient care to increase productivity and highly valued, it is very difficult to practice due to the limited nursing resources, higher acuity levels and nursing care cost. It is strongly recommended that the government needs to look at the unreasonable reimbursement system and recognize the nursing care costs to the high acuity level patients. Otherwise, make the patient responsible for the nursing care cost so that we can provide more efficient and patient focused care.

  • PDF

말뚝지지 전면기초의 3차원 근사해석기법 개발 (Development of Three-dimensional Approximate Analysis Method for Piled Raft Foundations)

  • 조재연;정상섬
    • 한국지반공학회논문집
    • /
    • 제28권4호
    • /
    • pp.67-78
    • /
    • 2012
  • 철지반의 비선형성을 고려한 말뚝지지 전면기초의 3차원 해석기법(YSPR)을 개발하였다. 전면기초는 6개의 자유도를 가진 평면쉘 요소로, 말뚝은 보-기둥 요소로 모델링하여 전면기초와 결합하였다. 또한 말뚝두부 및 지반의 강성은 $6{\times}6$ 강성행렬로 모델링 하였으며, 전면기초-말뚝-지반의 상호작용은 비선형 하중전이함수를 이용하여 선형/비선형거동의 모사가 가능하도록 하였다. 기존의 단순해석기법, 유한요소해석 및 현장계측값과의 비교 분석 결과, 본 해석기법이 대단면 말뚝지지전면기초에서 말뚝의 축하중 분포와 침하량을 비교적 정확히 산정하는 것으로 판단되며, 이러한 검증을 토대로 실제 대단면 기초설계에 대한 적용 가능함을 확인할 수 있었다.

핫스팟 분석을 통한 거창지역의 선구조선과 진앙의 상관관계 분석 (Relationship Analysis between Lineaments and Epicenters using Hotspot Analysis: The Case of Geochang Region, South Korea)

  • 조현우;지광훈;차성은;김은지;이우균
    • 대한원격탐사학회지
    • /
    • 제33권5_1호
    • /
    • pp.469-480
    • /
    • 2017
  • 본 연구는 기상청에서 지진의 계기관측이 시작된 1978년부터 2016년까지, 규모 2.0~2.5사이의 소규모 지진이 6회 발생한 경상남도 거창군 일원지역을 대상으로 수치표고모델을 이용한 3차원의 LANDSAT 8호 위성영상과 음영기복도로부터 선구조선을 추출하여 선구조선과 진앙(지진발생위치)간의 상관관계를 분석하였다. 선구조선의 통계분석 방법으로는 직각격자에 의한 단절현상 문제점을 완화하고 선구조선의 공간적 분포를 정확히 표현해줄 수 있는 육각격자 모양과, 격자크기에 따라 변화하는 밀도 값이 안정되는 지점의 격자크기를 사용하여 핫스팟 분석을 수행하였다. 핫스팟 분석방법은 선구조선이 집단화되어 나타나는 지역을 통계적으로 파악할 수 있기 때문에, 선구조선의 각 통계요소별(빈도, 교차점, 길이)로 도출되는 Z score를 통해 선구조선 밀집지역을 확인하였다. 또한 연산된 선구조선의 밀도와 진앙간의 상관성을 분석하기 위해 진앙에서의 Z score를 표준정규분포 상에 나타내어 선구조선의 밀도가 통계적으로 의미 있는 수준인지를 확인하였다. 그 결과, 6개의 진앙에서 3개 종류의 통계요소로 기록된 총 18개의 Z score 중 약 83%에 달하는 15개 값이 1.65 이상으로 나타났다. 이는 표준정규분포 상에서 95% 이상의 높은 밀도 값을 의미하여, 진앙이 선구조선 고밀도지역에 위치함을 알 수 있었다. 특히 선구조선 빈도는 모든 진앙에서, 교차점은 하나의 진앙을 제외한 나머지 진앙에서 밀도 값이 표준정규분포 상 95% 이상을 나타내어, 선구조선의 빈도와 교차점 밀도가 진앙과 높은 상관성이 있음을 확인하였다. 선구조선의 밀도 분포를 정확하게 표현하고, 진앙과의 상관관계를 분석한 본 연구는 잠재적인 지진발생 위험 지역을 추출하기 위한 기초연구로써 의미가 있다. 그러나 상기와 같은 결과를 조금 더 명확하게 하기 위해서는 지진의 발생빈도가 많고 더 광역적인 지역을 대상으로 한 추가적 연구의 필요성이 있다고 사료된다.

Radiative Transfer Model of Dust Attenuation Curves in Clumpy, Galactic Environments

  • 선광일
    • 천문학회보
    • /
    • 제41권2호
    • /
    • pp.40.2-40.2
    • /
    • 2016
  • The attenuation of starlight by dust in galactic environments is investigated through models of radiative transfer in a spherical, clumpy interstellar medium (ISM). We show that the attenuation curves are primarily determined by the wavelength dependence of absorption rather than by the underlying extinction (absorption+scattering) curve; the observationally derived attenuation curves cannot constrain a unique extinction curve unless the absorption or scattering efficiency is specified. Attenuation curves consistent with the Calzetti curve are found by assuming the silicate-carbonaceous dust model for the Milky Way (MW), but with the $2175{\AA}$ bump suppressed or absent. The discrepancy between our results and previous work that claimed the Small Magellanic Cloud dust to be the origin of the Calzetti curve is ascribed to the difference in adopted albedos; we use the theoretically calculated albedos whereas the previous ones adopted empirically derived albedos from observations of reflection nebulae. It is found that the model attenuation curves calculated with the MW dust are well represented by a modified Calzetti curve with a varying slope and UV bump strength. The strong correlation between the slope and UV bump strength, as found in star-forming galaxies at 0.5 < z < 2.0, is well reproduced if the abundance of the UV bump carriers is assumed to be 30-40% of that of the MW-dust; radiative transfer effects lead to shallower attenuation curves with weaker UV bumps as the ISM is more clumpy and dustier. We also argue that some of local starburst galaxies have a UV bump in their attenuation curves, albeit very weak.

  • PDF

변동하중하에서 고강도 알루미늄 합금의 피로수명 예측 (Fatigue Life Prediction for High Strength AI-alloy under Variable Amplitude Loading)

  • 심동석;김강범;김정규
    • 대한기계학회논문집A
    • /
    • 제24권8호
    • /
    • pp.2074-2082
    • /
    • 2000
  • In this study, to investigate and to predict the crack growth behavior under variable amplitude loading, crack growth tests are conducted on 7075-T6 aluminum alloy. The loading wave forms are generated by normal random number generator. All wave forms have same average and RMS(root mean square) value, but different standard deviation, which is to vary the maximum load in each wave. The modified Forman's equation is used as crack growth equation. Using the retardation coefficient D defined in previous study, the load interaction effect is considered. The variability in crack growth process is described by the random variable Z which was obtained from crack growth tests under constant amplitude loading in previous work. From these, a statistical model is developed. The curves predicted by the proposed model well describe the crack growth behavior under variable amplitude loading and agree with experimental data. In addition, this model well predicts the variability in crack growth process under variable amplitude loading.

Cox의 상호작용이론을 근거로 한 원예활동 프로그램이 경증치매노인의 일상생활수행능력 및 우울에 미치는 효과 (The Effects of a Horticultural Program based on Cox's Interaction Model on Ability for Daily Life and Depression in Older Patients with Mild Dementia)

  • 윤미진;성경미
    • 재활간호학회지
    • /
    • 제20권1호
    • /
    • pp.12-21
    • /
    • 2017
  • Purpose: This study attempts to examine the effects of a horticultural program on activities of daily living (ADL) and depression among older patients with mild dementia. Methods: This study adopted a quasi-experimental design-based nonequivalent control group pretest and posttest design, enrolling 30 older patients with mild dementia. The Korean Form of Geriatric Depression Scale was utilized, while the data was collected from the experimental group for 60 minutes, twice weekly for 6 weeks in 12 sessions. ADL and depression were assessed for both the experimental and the control group. Overall functions were assessed only for the experimental group. Results: The experimental group showed improvement in physical function, cognitive function, as well as psychological, emotional function and social function following each session (p<.001). The horticulture program was effective in both ADL ($Z^2=5.65$, p<.001) and depression (t=-5.24, p<.001). Conclusion: In this study, the horticultural therapy based on the Cox's interaction model had positive effects for older patients with mild dementia. Therefore, horticultural therapy may be commendably applied to older patients with mild dementia as a nursing intervention.

Automatic real-time system of the global 3-D MHD model: Description and initial tests

  • Park, Geun-Seok;Choi, Seong-Hwan;Cho, Il-Hyun;Baek, Ji-Hye;Park, Kyung-Sun;Cho, Kyung-Suk;Choe, Gwang-Son
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2009년도 한국우주과학회보 제18권2호
    • /
    • pp.26.2-26.2
    • /
    • 2009
  • The Solar and Space Weather Research Group (SOS) in Korea Astronomy and Space Science Institute (KASI) is constructing the Space Weather Prediction Center since 2007. As a part of the project, we are developing automatic real-time system of the global 3-D magnetohydrodynamics (MHD) simulation. The MHD simulation model of earth's magnetosphere is designed as modified leap-frog scheme by T. Ogino, and it was parallelized by using message passing interface (MPI). Our work focuses on the automatic processing about simulation of 3-D MHD model and visualization of the simulation results. We used PC cluster to compute, and virtual reality modeling language (VRML) file format to visualize the MHD simulation. The system can show the variation of earth's magnetosphere by the solar wind in quasi real time. For data assimilation we used four parameters from ACE data; density, pressure, velocity of solar wind, and z component of interplanetary magnetic field (IMF). In this paper, we performed some initial tests and made a animation. The automatic real-time system will be valuable tool to understand the configuration of the solar-terrestrial environment for space weather research.

  • PDF

Confinement model for RC columns strengthened with direct-fastened steel plates

  • Shan, Z.W.;Looi, D.T.W.;Su, R.K.L.
    • Steel and Composite Structures
    • /
    • 제39권4호
    • /
    • pp.367-381
    • /
    • 2021
  • Reinforced concrete (RC) columns can be strengthened by direct fastening of steel plates around a column, forming composite actions. This method can increase both the total load bearing area and the concrete confinement stress. To predict the axial load resistance of strengthened RC columns, the equivalent passive confinement stress of the stirrups and the steel jacket should be accurately quantified, which requires the stress in the stirrups and shear force in the connections to be first obtained. In this paper, parameters, i.e., the stress ratio of the stirrups and shear force ratio of steel plate connectors are utilized to quantify the stress of the stirrups and shear force in the connections. A mechanical model for determining the stress ratio of the stirrups and shear force ratio of steel plate connectors is proposed and validated using the experimental results in a previous study. The model is found to be robust. Subsequently, a parametric study is conducted and the optimum stress ratios of the stirrups and the optimum shear force ratios of connectors are proposed for engineering designs.

유구치 1급 와동에서 와동벽 위치에 따른 microtensile bond strength 비교 연구 (MICROTENSILE BOND STRENGTH ACCORDING TO DIFFERENT DENTIN WALL POSITION IN CLASS I CAVITY OF PRIMARY MOLAR)

  • 이현헌;정태련;김정욱;장기택
    • 대한소아치과학회지
    • /
    • 제33권4호
    • /
    • pp.693-698
    • /
    • 2006
  • 유구치 1급 와동의 복합레진 수복 시 C-factor가 가장 크게 나타나며 중합수축에 의한 응력도 가장 크게 나타난다. 이 실험에서는 응력이 각 와동벽 위치에 따라 다르게 나타나는 양상을 microtensile bond strength(MTBS)실험을 통해 확인해보았다. 하악 제2유구치 20개를 두 개의 군으로 나누었다. 각각 다른 종류의 복합레진으로 수복하였고 개별 치아에서 각각 치수벽 시편과 축벽 시편을 얻어 총 4개의 군으로 나누었다. MTBS를 측정하였으며 통계적 유의성을 student T-test를 통해 검정하였다. ZP: Filtek Z250- 치수벽, ZA: Filtek Z250- 축벽, SP : Filtek Supreme - 치수벽, SA: Filtek Supreme - 축벽, 다음과 같은 결과를 얻을 수 있었다. 1. ZP군과 ZA군, SP군과 SA군 사이에서는 유의한 차이가 존재하였다(p<.001). 2. ZP군과 SP군, ZA군과 SA군 사이에서는 유의한 차이가 존재하지 않았다(p<.001).

  • PDF