• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2009

This paper describes playback downlink and telecommand uplink channel design performed for a transportable small-sized KOMPSAT(Korea Multi-Purpose Satellite) ground station. As a result of downlink channel design, required receiving performance was calculated from the threshold signal-to-noise ratio of playback signal and it was revealed that this performance can be guaranteed in 1.5 m ground station with 6.5 dB/K of G/T. For the uplink channel design, 40 dBW of EIRP was derived from the threshold signal-to-noise ratio of telecommand signal received at on-board receiver. The implemented small-sized ground station based on design was evaluated to be fully acceptable for KOMPSAT TT&C(Telemetry, Tracking and Command) system and playback downlink design without taking account of additional 3 dB system link margin was shown to be effective because it had provided constantly initial channel performance without any remarkable degradation over several years of tests with KOMPSAT and KOMPSAT-2, for both uplink and playback downlink in the elevation angle above $10^{\circ}$.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.43-54
• /
• 1999

The divergence connection between steel circular tubes is widely used in such structures as factory facilities, steel circular hollow section truss, and off-shore tower. Steel circular hollow section (SCHS) have close section, and it makes their per-unit production expense higher than open sectioned products like L-shape, H-shape steels, but the sectional resistance of SCHS against vertical compression and torsion is very high. Despite the structural merits of SCHS, however, many engineers dislike to use them in their design because of uncertainty regarding the stress distribution and deformation behavior at their connections. Therefore, this thesis dealt with X-type connections, the most common forms of connection, and studied their load-deformation relationship. It observed how to show the load-deformation relationship at steel circular tube connections according to the diameter-thickness ratio (D/T) of the chord and diameter of branch-diameter of chord ratio (d/D) and suggested prediction yield load using by ring analysis method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1483-1484
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.623-624
• /
• 2010

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.743-755
• /
• 2015

It is well known that the quality of sample significantly determines the accuracy of soil parameters for laboratory testing. Although sampling disturbance has been studied over the last few decades, the theoretical investigation of soil disturbance due to sampling penetration has been rarely reported. In this paper, an analytical solution for estimating the soil disturbance due to sampling penetration was presented using cavity expansion method. Analytical results in several cases reveal that the soil at different location along the sample centerline experiences distinct phases of strain during the process of sampling penetration. The magnitude of induced strain is dependent on the position of the soil element within the sampler and the sampler geometry expressed as diameter-thickness ratio D/t and length-diameter ratio L/D. Effects of sampler features on soil disturbance were also studied. It is found that the induced maximum strain decreases exponentially with increasing diameter-thickness ratio, indicating that the sampling disturbance will reduce with increasing diameter or decreasing wall thickness of sampler. It is also found that a large length-diameter ratio does not necessarily reduce the disturbance. An optimal length-diameter ratio is suggested for the further design of improved sampler in this study.

• Nutrition Research and Practice
• /
• v.17 no.4
• /
• pp.789-802
• /
• 2023

BACKGROUND/OBJECTIVES: Habitual coffee consumption was inversely associated with type 2 diabetes (T2D) and hyperglycemia in observational studies, but the causality of the association remains uncertain. This study tested a causal association of genetically predicted coffee consumption with T2D using the Mendelian randomization (MR) method. SUBJECTS/METHODS: We used five single-nucleotide polymorphisms (SNPs) as instrumental variables (IVs) associated with habitual coffee consumption in a previous genome-wide association study among Koreans. We analyzed the associations between IVs and T2D, fasting blood glucose (FBG), 2h-postprandial glucose (2h-PG), and glycated haemoglobin (HbA1C) levels. The MR results were further evaluated by standard sensitivity tests for possible pleiotropism. RESULTS: MR analysis revealed that increased genetically predicted coffee consumption was associated with a reduced prevalence of T2D; ORs per one-unit increment of log-transformed cup per day of coffee consumption ranged from 0.75 (0.62-0.90) for the weighted mode-based method to 0.79 (0.62-0.99) for Wald ratio estimator. We also used the inverse-variance-weighted method, weighted median-based method, MR-Egger method, and MR-PRESSO method. Similarly, genetically predicted coffee consumption was inversely associated with FBG and 2h-PG levels but not with HbA1c. Sensitivity measures gave similar results without evidence of pleiotropy. CONCLUSIONS: A genetic predisposition to habitual coffee consumption was inversely associated with T2D prevalence and lower levels of FBG and 2h-PG profiles. Our study warrants further exploration.

• Korean Journal of Poultry Science
• /
• v.29 no.1
• /
• pp.25-35
• /
• 2002

Two experiments were conducted to studs the effects of early-life feed restriction, ages and duration on compensatory growth, feed efficiency, and abdominal fat pad deposition in broilers. The chicks were randomly assigned to four treatments (experiment 1) or seven treatments (experiment 2) . Each dietary treatment was replicated with three floor pens in both experiments, and twenty chicks were assigned to each pen. In experiment 1, birds in control group (C) were full-fed throughout the study. For treatments 1, 2, and 3, bards were fed diets containing 0.75 kcal ME/gB $W^{o.67}$/d for 3 d(T1), 1.5 ㎉ ME/gB $W^{o.67}$/d for 5 d (T2), and 2.25 local ME/gB $W^{0.67}$/d for 7 d (T3), all imposed beginning at 7 d of age. The selected value seems appropriate for maintenance feeding because the feed restriction at T1 resulted no growth in virtually. Although the birds previously subjected with restricted feeding significantly (P<0.05) enhanced growth partly (in 22~49 d), the weight gain over the entire growth period (7-49 d) was not influenced by the restricted feeding Programs. Whereas, the restricted feedings had effects with significant (P<0.75) increase in feed intake not only in 22~49 d, but in overall period (7-49 d). The feed conversion for the birds previously subjected with restricted feeding was significantly (P<0.05) improved after 21 d. The birds with restricted feedings (T1,T2,T3) showed better (P<0.05) feed conversion ratio than C both in 22-49 d and in 7-49 d. The restricted feeding programs did not show effects in reducing for abdominal fat pad deposition or mortality In experiment 2, the birds of C were full-fed in overall period. But for treatments 1, 2, 3, 4, 5, and 6 (T1-T6),the birds were fed diets containing 0.75 ㎉ ME/gB $W^{0.67}$/d for 3 or 5 d, starting at either 4, 7 or 10 d of age. The selected value seems appropriate for maintenance feeding because the feed restriction resulted no growth in virtually; which was same as experiment.

• Korean Journal of Agricultural Science
• /
• v.45 no.3
• /
• pp.411-418
• /
• 2018

A total of 576 seven-day-old male Ross 308 broilers with an average initial BW of $180{\pm}1g$ were used in a 4 week feeding experiment which included a starter phase (7 to 21 d) and a grower phase (22 to 35 d). Birds were randomly allocated into 1 of 3 treatments with 12 replicates per treatment and 16 birds per pen. The treatments consisted of the following: T1, Control; T2, T1 + 0.1% Creamer (Dongsuh Foods Corporation, Incheon, Korea), and T3, T1 + 0.5% Creamer. The broilers were weighed by pen and feed intake (FI) and the number of living broiler chickens were recorded on d 7, 21, and 35. These information were used to calculate the body weight gain (BWG) and feed conversion ratio (FCR). As results of this experiment, there were no significant differences in the BWG, FCR and nutrient digestibility among the treatments. With regards to meat quality, no adverse effects were observed among the treatments. However, a higher score in redness was observed in T3 than in T1. In addition, the relative weight of breast muscle was reduced in T3 compared with T1. Regardless of the nondairy creamer (NDC) inclusion levels, no negative effects on growth performance and nutrient digestibility were observed. In conclusion, non-dairy creamer could be a kind of fat sources additive in broiler diets, further studies are needed to test the optimum levels of the NDC to be supplemented in broilers diet.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.4
• /
• pp.278-285
• /
• 1991

This study was conducted to manufacture a good qualified organic fertilizer with cow dung through rapid composting process, and the proposal guideline of the degree of maturity could be estimated with the measurement of final product. It included total nitrogen content of above 2% on an oven-dry material basis, C/N ratio of below 20, CEC of more than about 60 me/100g, ratio of carbon in reducing sugar to the total carbon of below 35%, and temperature in pile of above $60^{\circ}C$. The total nitrogen content, the C/N ratio, and the Paper Chromatographic method couldn't be the guideline to evalute the maturity of cow dung compost. CEC was increased in increased fermentation and it was high in the high fermented temperature plots which were cow dung+ shredded bark in 1988, cow+dung+wood chips in 1989, and cow dung+rice straws in 1990. The ratio of carbon in reducing sugar to total carbon in 1990 was lower in cow dung+saw dust than cow dung+rice straws that was the highest temperature in pile. Generally cow dung was mixed well with saw dust and thus the total carbon of the product was high. The measurement of the temperature in pile seems to be a indirect guideline of maturity.

• Nutrition Research and Practice
• /
• v.1 no.4
• /
• pp.363-370
• /
• 2007

Single nucleotide polymorphism (SNP) in adiponectin gene has been associated with insulin resistance, diabetes, and cardiovascular disease (CVD). This study was performed to investigate the association of SNP 276G${\rightarrow}$T at adiponectin gene with CVD risk factors in Korean type 2 diabetes mellitus (DM) patients. The subjects were 351 type 2 DM patients visited a DM clinic in Seoul, and the patients with known CVD were excluded. The adiponectin SNP 276G${\rightarrow}$T was analyzed and dietary intakes were assessed by a Food Frequency Questionnaire. The prevalence of G/G, G/T, and T/T genotype was 47.6%, 43.3%, and 9.1%, respectively. Male subjects with T/T genotype showed significantly lower level of adiponectin and HDL-cholesterol and significantly higher C-reactive protein (CRP) level compared to G/G and G/T genotypes. In G/G genotype, protein intake was negatively correlated to body weight, BMI, and waist circumference, and there were positive correlation between carbohydrate intake and BMI, waist-hip ratio, and ApoB/apoA-1 ratio in G/T genotype. However, in T/T genotype, there was no significant association between macronutrient intakes and anthropometric and hematological values. In conclusion, CVD risk would be high in type 2 DM patients with T/T genotype, and the association of macronutrient intakes with anthropometric and hematologic factors was different among the three adiponectin genotypes. These results may imply the need for different dietary management regime according to adiponectin genotype to lower CVD complications in Korean type 2 DM patients.