• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.2
• /
• pp.23-37
• /
• 1985

This studies were carried out to get characteristics of frequency distribution, probable flood flows according to the return periods, and the correlation between return periods and those length of records affect the Risk of failure in the annual maximum series of the main river systems in Korea. Especially, Risk analysis according to the levels were emphasized in relation to the design frequency factors for the different watersheds. Twelve watersheds along Han, Geum, Nak Dong, Yeong San and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Type 1 extremal distribution was newly confirmed as a good fitted distribution at selected watersheds along Geum and Yeong San river basin. Three parameter lognormal Seom Jin river basin. Consequently, characteristics of frequency distribution for the extreme value series could be changed in connection with the watershed location even the same river system judging from the results so far obtained by author. 2. Evaluation of parameters for Type 1 extremal and three parameter lognormal distribution based on the method of moment by using an electronic computer. 3. Formulas for the probable flood flows were derived for the three parameter lognormal and Type 1 extremal distribution. 4. Equations for the risk to failure could be simplified as $\frac{n}{N+n}$ and $\frac{n}{T}$ under the condition of non-parametric method and the longer return period than the life of project, respectively. 5. Formulas for the return periods in relation to frequency factors were derived by the least square method for the three parameter lognormal and Type 1 extremal distribution. 6. The more the length of records, the lesser the risk of failure, and it was appeared that the risk of failure was increasing in propotion to the length of return periods even same length of records. 7. Empirical formulas for design frequency factors were derived from under the condition of the return periods identify with the life of Hydraulic structure in relation to the risk level. 8. Design frequency factor was appeared to be increased in propotion to the return periods while it is in inverse proportion to the levels of the risk of failure. 9. Derivation of design flood including the risk of failure could be accomplished by using of emprical formulas for the design frequency factor for each watershed.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.957-965
• /
• 2018

We study the class $C{\mathcal{V}} ({\Omega})$ of analytic functions f in the unit disk ${\mathbb{D}}=\{z{\in}{\mathbb{C}}$ : ${\mid}z{\mid}$ < 1} of the form $f(z)=z+{\sum}_{n=2}^{\infty}a_nz^n$ satisfying $$1+\frac{zf^{{\prime}{\prime}}(z)}{f^{\prime}(z)}{\in}{\Omega},\;z{\in}{\mathbb{D}}$$, where ${\Omega}$ is a convex and proper subdomain of $\mathbb{C}$ with $1{\in}{\Omega}$. Let ${\phi}_{\Omega}$ be the unique conformal mapping of $\mathbb{D}$ onto ${\Omega}$ with ${\phi}_{\Omega}(0)=1$ and ${\phi}^{\prime}_{\Omega}(0)$ > 0 and $$k_{\Omega}(z)={\displaystyle\smashmargin{2}{\int\nolimits_{0}}^z}{\exp}\({\displaystyle\smashmargin{2}{\int\nolimits_{0}}^t}{\zeta}^{-1}({\phi}_{\Omega}({\zeta})-1)d{\zeta}\)dt$$. Let $z_0,z_1{\in}{\mathbb{D}}$ with $z_0{\neq}z_1$. As the first result in this paper we show that the region of variability $\{{\log}\;f^{\prime}(z_1)-{\log}\;f^{\prime}(z_0)\;:\;f{\in}C{\mathcal{V}}({\Omega})\}$ coincides wth the set $\{{\log}\;k^{\prime}_{\Omega}(z_1z)-{\log}\;k^{\prime}_{\Omega}(z_0z)\;:\;{\mid}z{\mid}{\leq}1\}$. The second result deals with the case when ${\Omega}$ is the right half plane ${\mathbb{H}}=\{{\omega}{\in}{\mathbb{C}}$ : Re ${\omega}$ > 0}. In this case $CV({\Omega})$ is identical with the usual normalized class of convex univalent functions on $\mathbb{D}$. And we derive the sharp upper bound for ${\mid}{\log}\;f^{\prime}(z_1)-{\log}\;f^{\prime}(z_0){\mid}$, $f{\in}C{\mathcal{V}}(\mathbb{H})$. The third result concerns how far two functions in $C{\mathcal{V}}({\Omega})$ are from each other. Furthermore we determine all extremal functions explicitly.

• Korean journal of applied entomology
• /
• v.20 no.4 s.49
• /
• pp.212-216
• /
• 1981

This experiment was carried out to investigate the penetration velocity and diffusion ability of methyl bromide fumigants under the condition of natural gravity, and the effect of in control of yellow corn in the vortical silo. The results were as fallows 1. The methyl bromide remainded concentration on the surface of the vertical silo was rapidly reduced from over 100mg/l to under 20mg/l, within 2 hours after supplying methyl bromide fumigant 2. Even 3m depth place from the surface of the vertical silo filled with yellolw corn was well penetrated within 30 minutes, but its remained methyl bromide gas was reduced gradually from over 100mg/l to 30mg/l after 12 hours duration. 5. In case of 13m place tile penetration ability of methyl bromide was over 100mg/l within one hour and kept the same concentration of it for 12 hours, its remainded methyl bromide preserved over 40mg/l until 48 duration time. 4. Less methyl bromide gas was detected at the bottom place than 3m and 13m depth of the vertical silo. It showed bellow 20mg/l of methyl bromide gas only through the whole duration time. 5. Comparing to the vertical penetration velocity of mehtyl bromide gas, the horizontal diffusion ability was not so good. Therefore, remained methyl bromide gas of 3m depth at the wall side of silo was about half than that of center circle where the nearer place from the methyl bromide supplying point, and the methyl bromide gas of 13m depth placed center circle was detected about 15 to 20 times than that of wall side. 6. For the purpose of examining the mortality of methyl bromide, the testing insects (Lesser Rice weevil and confused flour beetle) placed on the surface and bottom side of the silo were killed completely after 24 hrs fumigation, and the same results showed also at the 3m, 7m and 13m depth after 48 hrs fumigation.

• Biomolecules & Therapeutics
• /
• v.6 no.4
• /
• pp.389-394
• /
• 1998

Cyclosporine (CsA) is a major immunosuppressive drug used widely to prevent organ allograft rejection. fits potential organotoxicity by prolonged use is known to cause both direct tissue damage and indirect pharmacokinetic interactions with other drugs. This study was performed to determine the effect of nicardipine (NCP) on the pharmacokinetic parameters of CsA in Sprague-Dawley rats. Each rat was administered with CsA in saline-treated group or in NCP-treated group which was pretreated with NCP (5 mg/kg/12 hours, i.p.) for 6 days. The plasma CsA concentration were analyzed by reversed HPLC: UV system at 0.5, 1, 2, 4, 6, and 8 hours after bolus injection of CsA (10 mg/kg). Pharmacokinetic parameters (mean$\pm$ SD, n=7) such as initial plasma concentration (C(0)), mean residence time (MRT), steady-state volume of distribution (Vdss), terminal half-life (t$\frac{1}{2}$($\beta$)) and plasma clearance (CLp) of CsA in each groups (saline-group vs NCP-group) were determined as follows: C(0) (5.66$\pm$ 1.98 vs 17.98$\pm$2.36, p<0.01); Vdss (2.68$\pm$ 1.6 vs 0.94 $\pm$ 0.25, p<0.01); CLp (0.53 $\pm$0.18 vs 0.21 $\pm$0.06, p<0.01). Therefore, Our results indicate that nicardipine significantly affects the pharmacokinetic parameters of cyclosporme, especially C(0), Vdss, and CLp in NCP-treated group. We suggest that the significant pharmacokinetic interaction between cyclosporine and nicardipine should be considered and cyclosporine level should be closely monitored and dosage reduction made as necessary in clinical situation that was coadministered with CsA and NCP.

• Journal of Korea Foundry Society
• /
• v.10 no.1
• /
• pp.31-42
• /
• 1990

The full mould casting process in one of the newly developed techniques which has many advantages. Unbonded sand mould has been prepared for the major mould and $CO^2$ gas mould has been used occasionally for comparison. Patterns were built up with expanded polystyrene and coated with three different materials. Silica, graphite and zircon were used for the coating layer. The effects on fluidity and temperature loss of molten metals were investigated. The molten metals were Al-5% Si alloy, Cu-30% Zn alloy and gray iron of approximately 4.0% of carbon equivalent. Experimental variables were runner section area, superheat, sprue height, coating materials, coating thickness and apparent density of EPS pattern. The effects of coating materials on fluidity and temperature loss of the molten metals during transient pouring are summarized as follows : As runner section area, superheat and sprue height increased, fluidity increased. Temperature loss decreased as runner section area and sprue height increased. However, reversed effects were observed in the case of superheat increment. The coating materials decreased the fluidity of each alloy in the order of silica, graphite and zircon. Zircon brought to the highest temperature loss among the coating materials used. The fluidity increased in the order gray iron, Cu-30% Zn and Al-5% Si alloy while temperature loss in the reverse order. Especially in case of reduced pressure process, the fluidity was increased apparently. Al-5% Si alloy showed the lowest temperature loss among the alloys. The increment of the apparent density of EPS pattern resulted in the fluidity decrease and temperature loss increase. The relation between fluidity and temperature loss of each alloy can be expressed by the following equation within the coating thickness limit of 0.5-1.5㎜. F^*={\frac{a}{T^*-b}}-c$ where, $F^*$ : fluidity in the Full mould, $T^*$ : temperature loss in the mould. a : parameter for full mould. b, c : constants.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.1
• /
• pp.1-14
• /
• 1978

To study the fluctuation of cold water in the East China Sea in summer heat budget of the Yellow Sea in winter was analysed based on the oceanographic and meteorological data compiled from 1951 to 1974. The maintain value of insolation was observed in December($160{\sim}190ly/day$), while the maximum in February ($250{\sim}260ly/day$). The range of the annual variation was found to be less than 50 ly/day. The value of the radiation term ($Q_s-Q_r-Q_h$) was remarkably small (mean 20 ly/day) in winter. It was negative value in December and January, and a positive value in February. The minimum total heat exchange from the sea ($Q_({h+c}$) was found value (471 ly/day) in February 1962, and the maximum (882 ly/day) in January 1963. The annual total heat exchange was minimum (588 ly/day) in 1962, and maximum (716 ly/day) in 1968. If the average deviation of mean water temperature at 50m depth layer were assumed to be the horizontal index ($C_h$) of colder water, $C_h$ is $C_h=\frac{{\Sigma}\limit_i\;A_i\;T_i}{{\Sigma}\limit_i\;A_i}$ where $A_i$ denotes the area of isothermal region and $T_i$ the value of deviation from mean sea water temperature. The vertical index ($C_v$) of cold water can be expressed similarly. Consequently the total index (C) of cold water equals to the sum of the two components, i.e. $C=C_h$＋$C_v$. Taking the deviation of mean sea surface temperature(T'w) in the third ten-day of Novembers in the Yellow Sea as the value of the initial condition, the following expressions are deduced : $C－T'w＝32.06 - 0.049$ $\;Q_T$ $C_h-T'w/2=12.20-0.019\;Q_T$ $C_v-T'w/2＝18.07-0.027\;Q_T$ where $Q_T$ denotes the total heat exchange of the sea. The correlation coefficients of these regression equations were found to be greater than 0.9. Heat budget was 588 ly/day in winter, and minimum water temperature of cold water was $18^{\circ}C$ in summer of 1962. The isotherm of $23^{\circ}C$ extended narrowly to southward up to $29^{\circ}N$ in summer. However, heat budget was 716 ly/day, and minimum water temperature of cold water was $12^{\circ}C$ in summer of 1968. The isotherm of $23^{\circ}C$ extended widely to southward up to $28^{\circ}30'N$ in summer. As a result of the present study, it may be concluded that the fluctuation of cold water of the East China Sea in summer can be predicted by the calculation of heat budget of the Yellow Sea in winter.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.515-525
• /
• 2018

Purpose: This study was performed to evaluate the cereal intake status and explore its relationship with the nutritional status of the Korean adults from 2013 ~ 2016, Korean National Health and Nutrition Examination Survey (KNHANES). Methods: We analyzed dData from the combined 2013 ~ 2016 Korean National Health and Nutrition Examination Survey were analyzed. The analysis included 12,199 adults aged from 19 to 64 years (male, n = 5,127, female, n = 7,072). In this study, according to cereal intake frequency (From food frequency questionnaire), we classified tThe subjects were classified according into the "non-cereal intake (NCI)" group (male, n = 4,290, female, n = 5,578), and "cereal intake (CI)" group (male, n = 837, female, n = 1,494) according to cereal intake frequency (From food frequency questionnaire). Results: Typically, 79.6% of adults did not consume cereals (male 81.6%, female 77.3%);, 13.4% consumed cereals 1-3 times a month (male 12.2%, female 14.8%) and 7.1% consumed cereals more than once a week (male 6.2%, female 7.9%). In the case of both males and females, the nutrient density (nutrient intake per 1,000 kcal) and Index of Nutritional Quality (INQ) of protein, calcium, phosphorous, potassium, vitamin A, vitamin $B_1$, vitamin $B_2$, niacin, and vitamin C in the Non-Cereal group were significantly lower than those of the CI group (respectively, p < 0.01). Conclusion: Our These results reveal highlight the low frequency of cereal intake in Korean adults and the better nutritional status in adults who consume cereals. It is hypothesized that tThe data of the present study would is expected to serve as basic data to improve the nutritional status of Korean adults.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2013

The reproductive performance of multivoltine breed 'Nistari' and bivoltine breeds as NB18, P5 and a bivoltine hybrid (NB18 ${\times}$ P5) of B. mori were studied in different seasons in terms of total number of eggs laid, unlaid and hatching efficiency of the laid eggs to critically assess the breeds / hybrid potentiality. The bivoltine hybrid showed better performance in all the seasons as compared to the breeds investigated, as expected due to possibility of hybrid vigour. Among the breeds, bivoltine P5 had a better egg laid performance in S1 (February - March), S2 (May - June) and S3 (September - October) seasons but with an increase in the number of unlaid eggs. The hatching percentage, although didn't show any definitive trend, still suggested a marginal better performance in the hybrid. Most importantly, egg laying rhythmicity was studied by mating the female moth at 6.00 a.m. for $3{\frac{1}{2}}$ hours, and subsequently allowing the laying of eggs both under BOD condition ($25{\pm}1^{\circ}C$ and $85{\pm}5%$ RH) and at ambient temperature ($23-28^{\circ}C$ and $74.7{\pm}5%$) separately. Maximum (90%) egg laid occurred from 3.30 to 7.30 pm (i.e. 4 - 6 h after decoupling). Similar laying patterns were observed when females where mated at 12 noon and decoupled at 3.30 pm, revealing that late photoperiod and early scotoperiod were favourable for egg laying in case of multivoltine breed and bivoltine prefers late photoperiod for egg laying.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.274-280
• /
• 2000

To analyze the resistance of the bottom trawl which is composed with 6 seams net, the field experiment was carried out on the sea near Kokunsan Is., western sea of Korea. The resistance was respectively measured in the otter board and the net according to the change of warp length and towing speed. The results obtained are summarized as follows : 1. Total resistance of the test trawl gear are slightly increased according to the length of warp. 2. The resistance of net is increasing a little according to the length of warp, but it is expressed. $$ R_n/=10 \frac{d}{\ell}$representatively. 3. The resistance of otter board can be expressed $Rb=1810_{\upsilon}^0.8.$ 4. Comparing with the value of measuring resistance and Koyama formula resistance by the length of warp respectively, the resistance of test trawl gear is high in the slow towing speed, and the resistance of Koyama formula is high in the fast towing speed, and that the cross-point of the both line between the resistance of the test net and Koyama formula is moved to high according to the increment of warp length.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.167-177
• /
• 1997

In thtx design of ductile moment -1csist1ng frnmcls (DMRFs) f'ollow~ng the. stlong columnweakbeam design philosophy, it is desirable that the joint and column remain essentiallyelastic in order to insure proper energy dissipation and lateral stability of the structure.Thv joint has been identifid as the "weak link: in DMRFs because any stiffness orstrength deterioration in this region can lead to substantial drifts and the possibility ofcollapse due to t'-delta effects. h3oreove1.. the tngintw is faced with the difficult task ofdetailing an element whose size is determined by theframing members, but \vhich mustresist a set of loads very different from those used in the design of the beams and columns.Four 3 -scale beam-column-slab joint assemblies were designed according to existing cod\ulcornerrequirements of' ACI 318-89. representing perimeter joints of DMRFs with reinforced highstrength concrete. The influence on aseismic behavior of beam-column joints due tomonolithic slab, has been investigated.lab, has been investigated.