• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.242.1-242.1
• /
• 2003

The bioequivalence of two tablet formulations of 12.72 mg domperidone maleate (Shinpoong "$\textrm{Dompi}^{?}$" tablets vs. Janssen Korea "$\textrm{Dompi}^{?}$" tablets) was assessed in healthy Korean volunteers after oral administration in a randomized crossover study. Blood samples were collected at specified time intervals, and plasma concentration was measured as the amount of domperidone base using a validated HPLC method. The pharmacokinetic parameters of $AUC_{0{\longrightarrow}48}$, $C_{max}$, $T_{max}$$t\frac{1}{2}$ were determined from plasma concentration-time profile of two formulations. (omitted)

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.2
• /
• pp.39-46
• /
• 1993

In this experimental study, it is concerned to develop a simple equation using jar-test results in order to predict the optimum dosage of coagulant, PAC(polyaluminum chloride). Considering the relationships with the reactions of coagulation and flocculation, the four independent variables (e.g. turbidity, temperature, pH and alkalinity) are selected out of many parameters and they are put into calculations to develop an equation by means of multi-regression method. As the result, the dosing rate of PAC is proportional to turbidity, pH and alkalinity, but in inverse to temperature. And the developed equation is as follow, $$D_c=\frac{3.2{\cdot}T^{0.37}{\cdot}A^{0.04}{\cdot}P^{0.5}}{t^{0.1}},\;(R^2=0.9443)$$ And also, comparing between the estimated value from the equation and the real dosing rate in the plant, Kwangam and Tdukdo, during 1988~1991, it is represented an agreement having a relative error of 16.4%, 17.8%, respectively.

• Journal of the Korean Mathematical Society
• /
• v.47 no.6
• /
• pp.1147-1165
• /
• 2010

In this paper we compare a torsion free sheaf F on $P^N$ and the free vector bundle $\oplus^n_{i=1}O_{P^N}(b_i)$ having same rank and splitting type. We show that the first one has always "less" global sections, while it has a higher second Chern class. In both cases bounds for the difference are found in terms of the maximal free subsheaves of F. As a consequence we obtain a direct, easy and more general proof of the "Horrocks' splitting criterion", also holding for torsion free sheaves, and lower bounds for the Chern classes $c_i$(F(t)) of twists of F, only depending on some numerical invariants of F. Especially, we prove for rank n torsion free sheaves on $P^N$, whose splitting type has no gap (i.e., $b_i{\geq}b_{i+1}{\geq}b_i-1$ 1 for every i = 1,$\ldots$,n-1), the following formula for the discriminant: $$\Delta(F):=2_{nc_2}-(n-1)c^2_1\geq-\frac{1}{12}n^2(n^2-1)$$. Finally in the case of rank n reflexive sheaves we obtain polynomial upper bounds for the absolute value of the higher Chern classes $c_3$(F(t)),$\ldots$,$c_n$(F(t)) for the dimension of the cohomology modules $H^iF(t)$ and for the Castelnuovo-Mumford regularity of F; these polynomial bounds only depend only on $c_1(F)$, $c_2(F)$, the splitting type of F and t.

• Wind and Structures
• /
• v.23 no.2
• /
• pp.143-155
• /
• 2016

The interaction between two different shaped structures is very important to be understood. Fluid-structure interactions and aerodynamics of a circular cylinder in the wake of a V-shaped cylinder are examined experimentally, including forces, shedding frequencies, lock-in process, etc., with the V-shaped cylinder width d varying from d/D = 0.6 to 2, where D is the circular cylinder diameter. While the streamwise separation between the circular cylinder and V-shaped cylinder was 10D fixed, the transverse distance T between them was varied from T/D = 0 to 1.5. While fluid force and shedding frequency of the circular cylinder were measured using a load cell installed in the circular cylinder, measurement of shedding frequency of the V-shaped cylinder was done by a hotwire. The major findings are: (i) a larger d begets a larger velocity deficit in the wake; (ii) with increase in d/D, the lock-in between the shedding from the two cylinders is centered at d/D = 1.1, occurring at $d/D{\approx}0.95-1.35$ depending on T/D; (iii) at a given T/D, when d/D is increased, the fluctuating lift grows and reaches a maximum before decaying; the d/D corresponding to the maximum fluctuating lift is dependent on T/D, and the relationship between them is linear, expressed as $d/D=1.2+{\frac{1}{e}}T/D$; that is, a larger d/D corresponds to a greater T/D for the maximum fluctuating lift.

• Journal of Periodontal and Implant Science
• /
• v.32 no.4
• /
• pp.697-709
• /
• 2002

The present study was performed to evaluate the effect of citric acid on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, titanium plasma-sprayed surface, and sand-blasted, large grit, acid etched surface were utilized. Implant surface was rubbed with pH 1 citric acid for $\frac{1}{2}$ min., 1 min., 1 $\frac{1}{2}$ min., 2 min., and 3min, respeaively in the test group and implant surface was not treated in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In titanium plasma-sprayed surfaces, round or amorphous particles were deposited irregularly. The irregularity of titanium plasma-sprayed surfaces conditioned with pH 1 citric acid was lessened and the cracks were increased relative to the application time of pH 1 citric acid. 3. Sand-blasted, large grit, acid etched surfaces showed the macro/micro double roughness. The application of pH 1 citric acid didn't change the characteristics of the sand-blasted, large grit, acid etched surfaces. In conclusion, the application of pH 1 citric acid to titanium plasma-sprayed surface is improper. And pure titanium machined surface implants and sand-blasted, large grit, acid etched surface implants can he treated with pH 1 citric acid for peri-implantitis treatment if the detoxification of these surfaces could be evaluated.

• Journal of the Korean Mathematical Society
• /
• v.57 no.6
• /
• pp.1347-1372
• /
• 2020

We study bifurcation for the following fractional Schrödinger equation $$\{\left.\begin{eqnarray}(-{\Delta})^su+V(x)u&=&{\lambda}f(u)&&{\text{in}}\;{\Omega}\\u&>&0&&{\text{in}}\;{\Omega}\\u&=&0&&{\hspace{32}}{\text{in}}\;{\mathbb{R}}^n{\backslash}{\Omega}\end{eqnarray}\right$$ where 0 < s < 1, n > 2s, Ω is a bounded smooth domain of ℝⁿ, (-∆)^s is the fractional Laplacian of order s, V is the potential energy satisfying suitable assumptions and λ is a positive real parameter. The nonlinear term f is a positive nondecreasing convex function, asymptotically linear that is $\lim_{t{\rightarrow}+{\infty}}\;{\frac{f(t)}{t}}=a{\in}(0,+{\infty})$. We discuss the existence, uniqueness and stability of a positive solution and we also prove the existence of critical value and the uniqueness of extremal solutions. We take into account the types of Bifurcation problem for a class of quasilinear fractional Schrödinger equations, we also establish the asymptotic behavior of the solution around the bifurcation point.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.91-103
• /
• 1998

Design data for COD and nitrogen removal from wastewater were collected from Pilot's Multi-stage Bio-reactor. Hyraulic conditions and pollutant loadings were varied in order to optimize the biological and operational parameters. Pilot's experimental results summarize as followings. 1. T-N removal efficiency in the organic volumetric loading 0.2 kgCOD/m$^{3}$·d was obtained as maxium of 85% at internal recycle ratio 2.5 and in more ratio than this it was decreased. Organic removal efficiency was about 91% under the overall experimental conditions and not influenced by recycle ratio.. 2. Nitrification reaction was shown as maxium in the SCOD$_{cr}$/NH$^{+}$-N ratio of 6.5 and in more ratio than this it was decreased. Denitrification rate was the maxium as 85% in more than 7.5 of SCOD$_{cr}$/NO$_{x}$-N ratio and in the ratio over this ratio it becomes constant. 3. By utilizing an applied new model of Stover-Kincannon from Monod's kinetic model, concentration of T-N in the effluent according to flow quanity in the influent was estimated as 8.74 and -67.5 respectively. The formula for estimating T-N concentration of effluent was obtained like this: N$_e$=N$_0$(1- $\frac{8.74}{(QN$_0$/A)-67.05}$)

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.133-133
• /
• 1993

DA-125의 rat blood중 분해반감기는 4.28분으로, DA-125는 정맥 투여후 신속히 M1으로 분해되었으며, DA-125는 투여 10분 후부터 검출되지 않았다. Mouse에 25mg/kg 정맥주사 한 후의 M1의 phamacokinetic parameter는 terminal t$\frac{1}{2}$ 344분, MRT 371분, Vss 25.7 $\ell$/kg, CL$_{total}$ 69.3 ml/min/kg이었으며 투여 2hr후에 M1및 대사체가 폐, 위, 신장등에는 다량 존재하였으나 심장에서는 검출되지 않았다. Rat에 10 mg/kg 정맥주사한 후의 혈장농도는 terminal phase에 도달하지 못하고 혈장농도가 변동을 나타내었다. 담즙으로의 배설은 주로 M2의 형태로 이루어졌으며 M1이 소량 차지하고 M3와 M4는 검출되지 않았다. DA-125는 rat 및 mouse liver homogenate에 의해 대사되어 FT-ADM(M1) ,13-dihy-dro FT-ADM(M2), 7-deoxy-adriamycinone(M3) 및 7-deoxy-13-dihydro adriamyci-none(M4)를 형성하였다. DA-125는 혐기, 호기 및 보효소, 종차에 관계얼이 반응개시 30분후에 약 90%가 분해되었으나 각 대사체의 생성여부 및 속도는 조건에 따라 변화하였다.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.244.2-244.2
• /
• 2003

The objective of this study was to characterize the absorption and pharmacokinetic disposition of novel cyclic tetrapeptide, apicidin, in rats. Apicidin was administered to SD rats by i.v. bolus injection (1,2 or 4 mg/kg) and oral gavages (10 mg/kg). Serum levels of apicidin were monitored by LC/MS over 8 hours following each administration. Upon i.v. injection, serum levels of apicidin were best fit by a multi-exponential equation. The t$\frac{1}{2}$. Cl$\sub$s/ and V$\sub$ss/ ranged from 0.9-1.1 hr, 52.8-56.5 ml/min/kg, and 2.6-2.7 L/kg, respectively. (omitted)

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.523-537
• /
• 2002

The present study was performed to evaluate the effect of tetracycline - HCl on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, SLA surface and $TiO_2blasted$ surface were used. Implant surface was rubbed with 5Omg/ml tetracycline - HCl solution for ${\frac}{1}{2}$ min., 1 min., $1{\frac}{1}{2}$ min., 2 min., and 3min. respectively in the test group and with no conditioning in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. In the pure titanium machined surfaces, the control specimen showed a more or less rough machined surface composed of alternating positive and negative lines corresponding to grooves and ridges. After treatment, machining line was more pronounced for the control specimens. but in general, test specimens were similar to control. 2. In the SLA surfaces, the control specimen showed that the macro roughness was achieved by large-grit sandblasting. subsequently, the acid-etching process crated the micro roughness, which thus was superimposed on the macro roughness. 3. In the SLA surfaces, irrespective of the application time of 50mg/ml tetracycline-HCl solution, in general, test specimens were similar to control. 4. In the $TiO_2blasted$ surfaces the control specimen showed the rough surface with small pits. The irregularity of the $TiO_2blasted$ surfaces with 50mg/ml tetracycline-HCl solution was lessened and the flattened areas were wider relative to the application time of tetracycline - HCl solution. In conclusion, pure titanium machined surfaces and SLA surfaces weren't changed irrespective of the application time of tetracycline-HCl solution. And the $TiO_2blasted$ surfaces conditioned with tetracycline - HCl solution began to be changed from $1{\frac}{1}{2}$ min. This results are expected to be applied to the regenerative procedures for peri-implantitis treatment.