• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.133-160
• /
• 1994

In this paper, we propose a comprehensive geometric correction algorithm of Along Track Scanning Radiometer(ATSR) images. The procedure consists of two cascaded modules; precorrection and fine co-location. The pre-correction algorithm is based on the navigation model which was derived in mathematical forms. This model was applied for correction raw(un-geolocated) ATSR images. The non-systematic geometric errors are also introduced as the limitation of the geometric correction by this analytical method. A fast and automatic algorithm is also presented in the paper for co-locating nadir and forward views of the ATSR images by using a binary cross-correlation matching technique. It removes small non-systematic errors which cannot be corrected by the analytic method. The proposed algorithm does not require any auxiliary informations, or a priori processing and avoiding the imperfect co-registratio problem observed with multiple channels. Coastlines in images are detected by a ragion segmentation and an automatic thresholding technique. The matching procedure is carried out with binaty coastline images (nadir and forward), and it gives comparable accuracy and faster processing than a patch based matching technique. This technique automatically reduces non-systematic errors between two views to .$\pm$ 1 pixel.

• 분석과학
• /
• 제18권1호
• /
• pp.51-58
• /
• 2005

A comparison of the analytical data obtained by three $k_0$-NAA software programs was carried out using both the airborne particulate matter collected from an urban site and the certified reference materials of the air filter and urban dust to evaluate the performance of the analysis. The individual $k_0$-NAA standardization methods of three countries, Korea, China and Vietnam which had been modified from the well established $k_0$-program were used for the comparative analysis. The measured concentrations of 30 elements from the two kinds of air samples based on this software were in agreement with each other within about 20% analytical error except for a few elements. By contrast, the results of China and Vietnam were moderately higher than that of Korea due to a systematic error associated with the detection efficiency, gamma peak analysis and geometric effect.

• Steel and Composite Structures
• /
• 제6권1호
• /
• pp.33-53
• /
• 2006

The rotational behaviour of bolted extended end plate beam-to-column connections is evaluated in the context of the component method. The full moment-rotation response is characterized from the force-deformation curve of the individual joint components. The deformability of end plate connections is mostly governed by the bending of the column flange and/or end plate and tension elongation of the bolts. These components form the tension zone of the joint that can be modelled by means of "equivalent T-stubs". A systematic analytical procedure for characterization of the monotonic force-deformation behaviour of individual T-stub connections is proposed. In the framework of the component method, the T-stub is then inserted in the joint spring model to generate the moment-rotation response of the joint. The procedures are validated with the results from an experimental investigation of eight statically loaded extended end plate bolted moment connections carried out at the Delft University of Technology. Because ductility is such an important property in terms of joint performance, particularly in the partial strength joint scenario, special attention is given to this issue.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.48-54
• /
• 2012

In this paper, quantitative and systematic procedures for establishing Key Performance Indicators (KPI's) of R&D departments are presented. The proposed methodology is composed of 4 steps : 1) identification of critical success factors, 2) identification of potential KPI's, 3) determination of KPI's and 4) monitoring and execution. A Strategy Map has been presented to better align KPI's with a company's competitive strategies. Also, Analytical Hierarchy Planning (AHP) is used to determine weights of KPI's and Data Envelopment Analysis (DEA) is used to analyze the effectiveness of R&D departments. To demonstrate its validity of the proposed method, it has been applied to the R&D divisions of a semiconductor company.

• Biomolecules & Therapeutics
• /
• 제29권6호
• /
• pp.582-595
• /
• 2021

Researchers have endeavored to identify the etiology of inflammatory bowel diseases, including Crohn's disease and ulcerative colitis. Though the pathogenesis of inflammatory bowel diseases remains unknown, dysregulation of the immune system in the host gastrointestinal tract is believed to be the major causative factor. Omics is a powerful methodological tool that can reveal biochemical information stored in clinical samples. Lipidomics is a subset of omics that explores the lipid classes associated with inflammation. One objective of the present systematic review was to facilitate the identification of biochemical targets for use in future lipidomic studies on inflammatory bowel diseases. The use of high-resolution mass spectrometry to observe alterations in global lipidomics might help elucidate the immunoregulatory mechanisms involved in inflammatory bowel diseases and discover novel biomarkers for them. Assessment of the characteristics of previous clinical trials on inflammatory bowel diseases could help researchers design and establish patient selection and analytical method criteria for future studies on these conditions. In this study, we curated literature exclusively from four databases and extracted lipidomics-related data from literature, considering criteria. This paper suggests that the lipidomics approach toward research in inflammatory bowel diseases can clarify their pathogenesis and identify clinically valuable biomarkers to predict and monitor their progression.

• International Journal of Computer Science & Network Security
• /
• 제22권9호
• /
• pp.300-306
• /
• 2022

The theoretical analysis and synthesis of prospects for the development of distance learning in Ukraine, the main topical problems of distance education in Ukraine are considered, the main factors that hinder the introduction of distance learning are analyzed, to pay attention to the need to increase the level of computer literacy among Ukrainian educators and the formation of modern methodology of distance learning, in particular, a single, systematic, national approach of organization, coordination and control in this area. Research methods: analytical method, method of structural and functional analysis, phenomenological method, content analysis method, philosophical reflection method, sociological methods (questionnaire, interview).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.593-598
• /
• 2002

Routinely, strength method for the determination of the nominal moment of reinforced concrete beam is assumed to also be suitable for strengthening beams with carbon fiber sheets since typically strengthening beams compromise 98% by volume of reinforced concrete. Flexural capacity of strengthening beam is absolutely dependent upon the type of reinforcement materials, amount of reinforcement, anchoring system, adhesion capacity between reinforcement material and concrete. Therefore, it might be incorrect to use strength method for analysis and design of strengthening beam without considering the differences in the load-deflection curves, mechanism of failure, state of stress distribution, failure strain of the reinforcement. An flexural analysis based on force equilibrium and strain comparability has been developed for strengthening beam. Systematic experimental investigations are compared with analytical results. Then, the adaptation of strength method for strengthening beam have also been discussed.

• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.171-177
• /
• 2007

It is well known that mobile phones have been a indispensable communication tool for human life. The spiral springs are used as the main component of the semi-auto sliding mechanism of mobile phones. The characteristic of axiomatic approach is scientific and analytical method, and axiomatic approach is different from other design methods in offering the systematic method at an early stage of design. The axiomatic approach could determine design parameter and arrange the order of design and estimate the optimum design in good order. In axiomatic approach, the composition is divided by customer requirement, functional requirement, design parameter, and design matrix in large portion. This paper presents design in sliding mechanism for mobile phones by finite element method and axiomatic design.

• 공학교육연구
• /
• 제23권2호
• /
• pp.31-42
• /
• 2020

This study aims to analyze the research trends of female engineering students focused on domestic research and to suggest implications for future researches. For this purpose, 67 domestic researches (academic articles & graduate theses) which were published since 1996 were collected using the academic research information service and the National Assembly Library search service. All of these 67 researches have been reviewed and classified according to analytical criteria such as publication year, research method, journal's research field and research subjects. Our findings show that firstly, related research on female engineering students has been growing since 1996. Secondly, there were more researches of both academic journals and graduate theses, using quantitative method compared to those with the other research methods. Thirdly, the research themes could be classified as follows: gender-awareness, female engineering students'(hereafter, FES) psychological variables, customized education for FES, career related variables, FES's properties and counselling for them. Fourth, regarding the result of analysis on the research topic, 41.79% of the researches were related to FES's 'career' related factors as well as diverse correlates. Based on these findings, it is necessary to continue studying on FES using various research methods as well as adopting different research perspectives. Also, practical and educational treatments for FES are required with particular attention to their individual variables.

• Smart Structures and Systems
• /
• 제10권2호
• /
• pp.89-110
• /
• 2012

This study was intended to efficiently perform the probabilistic optimal safety assessment of steel cable-stayed bridges (SCS bridges) using stochastic finite element analysis (SFEA) and expected life-cycle cost (LCC) concept. To that end, advanced probabilistic finite element algorithm (APFEA) which enables to execute the static and dynamic SFEA considering aleatory uncertainties contained in random variable was developed. APFEA is the useful analytical means enabling to conduct the reliability assessment (RA) in a systematic way by considering the result of SFEA based on linearity and nonlinearity of before or after introducing initial tensile force. The appropriateness of APFEA was verified in such a way of comparing the result of SFEA and that of Monte Carlo Simulation (MCS). The probabilistic method was set taking into account of analytical parameters. The dynamic response characteristic by probabilistic method was evaluated using ASFEA, and RA was carried out using analysis results, thereby quantitatively calculating the probabilistic safety. The optimal design was determined based on the expected LCC according to the results of SFEA and RA of alternative designs. Moreover, given the potential epistemic uncertainty contained in safety index, failure probability and minimum LCC, the sensitivity analysis was conducted and as a result, a critical distribution phase was illustrated using a cumulative-percentile.