• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.63-71
• /
• 2011

Due to the rapid development of digital technnology and informantion communication, in the IEC 61850 based substation automation system, the innovative paradigm shift is expected and also required in many substation-related jobs, especially in the device function test area Accordingly a common testing model which can simplify the complex contents of the SAS performance test performed by test engineers has been identified, that can overcome limitations of engineers' own testing knowledge and experience. Testing models and its design system for the comprehensive performance test of the Substation Automation System is developed and the result of the study is reported in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.438-441
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, a sea-trial test on a pendulum-type MD-ARS passively operated is carried out in Suyoung, Busan. After the system is installed on the cabin of the small leisure boat, a series of test is conducted before and after operating the system. Through the test, it is confirmed that the roll rate of the ship is pretty well reduced by the system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1014-1023
• /
• 2008

The K-AGT test line is managed similarly to revenue operation and operated automatically 120km per day, total 90,000km from August 2004 to December 2007. To enhance reliability of developed system, maintenance information system based on RCM is applied. The maintenance program applied in test line is based on RCM which prevent a fault before it happens and a fault made in test line is analysed by reliability growth test. Vehicle system, power supply system, signalling system, track and infrastructure are built in test line and it is reviewed enhancing system performance and changing designs to commercialize through reliability growth analysis method.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.424-430
• /
• 2008

A new active vibration measurement system in electric power transmission line is presented, using in the nondestructive test. With a permanent magnet and a couple of coils, the system exerts impact force to a test object and in turn picks up the vibration of the object. The natural frequency with the amplitude obtained from the system are used as a basis for the detection of defects in the object. The system is controlled by an electronic device designed to facilitate the fully automated testing process with consistent repeatability and reliability which are essential to the nondestructive test. The system is expected to be applied to the wide area of defect detection including the classification of mechanical parts in production and inspection processes.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.50-56
• /
• 1994

A DC generator control system was designed to control the torque of a rotating shaft precisely. The control system is composed of a strain gage type torque cell, a torque cell amplifier, a computer, a D/A converter, a error detector, a DC voltage amplifier and a resistor. The response test under unit step input and the dynamic stability test for the designed control system were carried out. It was confirmed that the settling time from the response test is about 4 s and the error from the dynamic stability test is less than 0.06% of rated output of torque cell. The designed control system may be used to control a DC generator which may be used to apply torque to a rotating shaft.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.576-580
• /
• 2000

This paper describes about the field test of IGBT VVVF inverter for the propulsion system. The 1650kV class IGBT VVVF inverter has been developed. Therefore the field test is performed in SMG 6 Line to confirm its the reliability and performance. The train consists of 4M4T and the electrical equipment for field test are as follows : VVVF inverter 4 sets 16 traction motors and 3 SIVs The propulsion system which have the excellent acceleration/deceleration and the jerk chracteristics as well as starting ability on slope are taken through the field test.

• Journal of Information Processing Systems
• /
• 제8권2호
• /
• pp.213-240
• /
• 2012

Safety critical systems, real time systems, and event-based systems have a complex set of events and their own interdependency, which makes them difficult to test ma Safety critic Safety critical systems, real time systems, and event-based systems have a complex set of events and their own interdependency, which makes them difficult to test manually. In order to cut down on costs, save time, and increase reliability, the model based testing approach is the best solution. Such an approach does not require applications or codes prior to generating test cases, so it leads to the early detection of faults, which helps in reducing the development time. Several model-based testing approaches have used different UML models but very few works have been reported to show the generation of test cases that use events. Test cases that use events are an apt choice for these types of systems. However, these works have considered events that happen at a user interface level in a system while other events that happen in a system are not considered. Such works have limited applications in testing the GUI of a system. In this paper, a novel model-based testing approach is presented using business events, state events, and control events that have been captured directly from requirement specifications. The proposed approach documents events in event templates and then builds an event-flow model and a fault model for a system. Test coverage criterion and an algorithm are designed using these models to generate event sequence based test scenarios and test cases. Unlike other event based approaches, our approach is able to detect the proposed faults in a system. A prototype tool is developed to automate and evaluate the applicability of the entire process. Results have shown that the proposed approach and supportive tool is able to successfully derive test scenarios and test cases from the requirement specifications of safety critical systems, real time systems, and event based systems.

• 항공우주기술
• /
• 제2권1호
• /
• pp.29-34
• /
• 2003

전기체 구조시험에서 사용되는 시험설비는 규모가 크고 여러 시스템들이 상호 유기적인 결합체계를 이루고 있다. 이 시험설비를 구성하는 여러 요소들이 비정상적인 작동을 하게 되면, 구조시험의 진행이 영향을 받게 되며 몇몇 중요 요소들은 구조시험의 돌발적인 중지를 유발하게 된다. 따라서 이들 중요 요소들은 시험동안 감시의 대상이 되며, 이를 위한 감시 시스템이 필요하게 된다. 본 논문에서는 전기체 구조시험 설비 감시 시스템 개발과 관련하여 감시 및 지시 대상 항목 선정, 시스템 설계에 대하여 소개하였다. 본 논문에서 소개된 감시 시스템은 현재 T-50 전기체 정적 시험에 성공적으로 활용되고 있으며, 향후 피로시험에 적용할 수 있도록 확장할 예정이다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권4호
• /
• pp.147-155
• /
• 2007

Mobile air conditioning systems work under widely changing operating conditions. To understand the system behavior under such dynamic conditions, a test facility that can impose transient loads as well as conducting dynamic measurements is needed. To test mobile air conditioning systems including their dynamic performance under various drive cycle patterns without using full scale vehicles in a wind tunnel, a new test facility, called "dynamic simulator," is described. It can replicate real vehicle operating conditions by interacting with the system being tested based on the measured system performance and subsequently adjusting the air properties returning to the test system based on the results of a numerical cabin model. A new dynamic simulator has been designed, constructed, and verified for performing dynamic tests. It was successful in controlling the temperature and relative humidity of the air returning to the test unit within ${\pm}0.7^{\circ}C$ and ${\pm}4%$ of their respective intended values. The verification test under the New European Driving Cycle demonstrated that detailed transient behavior of the mobile air conditioning system could be measured by using this dynamic simulator.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.788-797
• /
• 2023

본 논문은 수직 이착륙 무인 항공시스템의 GPS (global positioning system) 불가 시 대체 항법 시스템으로의 영상보정항법 시스템을 시험하기 위한 검증환경 개발 내용을 소개한다. 개발 중인 영상보정항법 시스템의 시험 및 평가를 위해서는 가상 환경을 활용하는 것이 효율적이지만, 현재 국내에는 적합한 장비가 개발되어 있지 않다. 따라서 제안된 검증환경은 시험 대상 장비의 운용 환경을 모델링 및 시뮬레이션 하여 입력 신호를 생성하고, 출력 신호를 관측함으로써 대상 장비의 성능을 평가할 수 있도록 개발되었다. 연구 과정은 검증환경 요구도 생성, 검증환경 설계에서부터 구성품별 하드웨어 및 소프트웨어 설계, 제작까지 포괄적으로 기술되었다. 이를 바탕으로 제작된 검증환경을 개발 중인 영상기반 보정항법 알고리즘의 성능평가와 시뮬레이션 기반의 사전 비행시험 수행에 활용하였다.