• Natural Product Sciences
• /
• v.27 no.1
• /
• pp.54-59
• /
• 2021

Bergenia ciliata (Family: Saxifragaceae) is a folklore remedy for the treatment of various ailments in Asian countries. Bergenin (1) has been isolated as an active constituent in many studies, however, the amount of bergenin has not been determined in all parts of the plant. A simple RP-HPLC method was developed to determine the amount of bergenin in methanol extracts of leaves, rhizomes and roots of the plant. Separation was achieved on an Agilent Eclipse XDB-C18 column maintained at 25 ℃ using isocratic solvent system (water: methanol: acetic acid; 62.5:37:0.5 v/v/v) adjusted at pH 2 0 at a flow rate of 1.0 mL/min. and detected at 275 nm. Correlation coefficient (0.9952) showed linearity of concentration (5-200 ㎍/mL) and response. The values of LOD (0.00947 ㎍/mL) and LOQ (0.02869 ㎍/mL) indicated that method was sensitive. The recovery of bergenin was 99.99-100% indicating accuracy of method. The methanol extract of rhizomes contained higher amount of bergenin (19.4%) than roots (9.2%) and leaves (6.9%). It is concluded that methanol extract of rhizomes is a better source of bergenin than other parts of the plant. The findings are useful for standardization of bergenin containing extracts and herbal preparations.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.127-135
• /
• 2010

The validation of a simulation model is a key to demonstrate that the simulation model is reliable. However, among various validation methods have been introduced, it is very poor to research the specific techniques for the time series data. Therefore, this paper suggests the methodology to verify the simulation using the time series data by Wavelet Transform, Power Spectrum and Coherence. This method performs 2 steps as followed. Firstly, we get spectrum using the Wavelet transform available for non-periodic signal separation. Secondly, we compare 2 patterns of output data from simulation model and actual system by Coherence Analysis. As a result of comparing it with other validation techniques, the suggested way can judge simulation model accuracy more clearly. By this way, we can make it possible to perform the simulation validation test under various situations using detailed sectional validation method, which has been impossible using a single statistics for the whole model.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.41-50
• /
• 2006

This paper presents a novel ultrasonic sensor system to overcome limited distance detection range that can be measured only more than 30cm by single ultrasonic transducer. This is accomplished by separation of receiving capacitive ultrasonic transducer from transmitting capacitive ultrasonic transducer. And hardwares and software of the system are described in detail. The system makes very close range as well as long range detect by wireless precisely. Frequency of trigger pulse is 10Hz, but it is very low frequency for transmitting data in wireless module. Therefore, for triggering between receiver and transmitter, an algorithm for mixing and distinguishing trigger pulse from carrier pulse by software is proposed. The system is designed by common microprocessor 8051. The performance of the proposed method has been assessed through two types. The first, transmitting and receiving transducer are put on both sides. And then, distance of two point is measured as far as 0mm. Secondly, transmitting transducer send out ultrasonic pulse and measure the time of flight(TOF) until a first echo from an object detected by the detached receiving transducer. The distance between the detached transducers and a reflecting object is measured as far as 7cm. Images of measured ultrasonic waves and TOF for two methods presented to prove effectiveness of results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.8
• /
• pp.1894-1912
• /
• 2012

This paper proposes a system called Wireless Link based on Global Communication Channel (WLGCC) to enhance the spectrum sharing between digital broadcasting (DB) services and the cognitive radio (CR) system in the licensed band of 470-790 MHz. The WLGCC aims to enhance the spectrum sensing and geolocation database (GLD) spectrum sharing methods in the CR system. Spectrum sensing can be enhanced by receiving the status of the used frequencies from the WLGCC, thereby eliminating the need for a low detection threshold (i.e., avoiding the hidden node problem). In addition, the GLD can be enhanced by providing a reliable communication link between the database and the CR device in the form of an unused TV white space that is reserved as the proposed Global Communication Channel (GCC). This paper analyzes the coexistence of the new WLGCC system and the DB service in terms of avoiding additional interference. Specifically, we mathematically determine the WLGCC parameters, such as the in-band and out-of-band power levels, and operation coverage, and verify them using Monte Carlo simulation. The results show that WLGCC does not degrade the existing DB service and reliably transmits information of the vacant (or used) frequency bands to the CR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4152-4158
• /
• 2012

The Stereo X-ray inspection system is designed for effectively providing the additional information of objects than the conventional inspection system that offers only 2D cross-section of objects. We studied the geometric improvement of the stereo X-ray inspection system, the stereo matching algorithm of the single object using the edge and the volume reconstruction method for the inspected object. In this paper, we conduct a matching algorithm to find the correspondences between the images and reconstruct 3-D shapes of real objects using the stereo X-ray images. Also, we apply a new 3D reconstruction algorithm for the discrimination of two objects. For the separation of the overlapping objects, we calculate the vector of the object and divide inner and outer voxel of objects. And for the elimination of the overlapping area, we study the reconstruct 3D shapes using the threshold based Z-axis. The experimental results show that the proposed technique can enhance the accuracy of stereo matching and give more efficient visualization for overlap objects in the restricted environment.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.4
• /
• pp.157-168
• /
• 1995

The structural performance of Slip-Form system was examined to make use of many advantages of fast construction and high quality c0ncret.e. However, the separate cor~struction of wall and slabs may cause some weaknesses around the wall-slab connection region. Thus, the purpose of the study is to examine the structural performance of wall-type structure constructed by Slip-Form method and to develop an efficient connection system between wall and slabs. In order to investigate the system, 7 wall specimens and 8 wall-slab joint specimens were tested and the experimental results were compared with the design equations and theoretical analysis. A satisfactory performance was obtained from the wall specimen tests. However, wall-slab joint specimens with rebar connection materials I Ilalfen] were shown that. the strength of' wall should be checked during design porocess.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.383-392
• /
• 2017

This paper introduces a real-time 3D model generation system that can process in real time from multi-view image acquisition to image-based 3D model generation. This system describes how to collect, transmit, and manage the HD images input from 18 cameras and explain the background separation and smooth 3D volume model generation process. This paper proposes a new distributed data transmission and reception method for real-time processing of HD images input from 18 cameras. In addition, we describe a codebook-based background separating algorithm and a modified marching cube algorithm using perspective difference interpolation to generate smooth 3D models from multi-view images. The system is currently being built with a throughput rate of 30 frames per second.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.130-137
• /
• 2005

Recently, the importance of CAE research is growing with the advances of the automotive and computer industry. In addition, multi-body dynamics and powertrain analysis are the most important factors in improving the vehicle design. Since engine torque with curve-data was used for analyzing full car simulation in the multi-body dynamics system for many years, it is impossible to assess the concurrent analysis of the engine and powertrain element included in a real full car system. In powertrain, since vehicle are usually modeled as a simple mass and a inertia, they can not be seen as real cars. Moreover, it is hard to obtain additional dynamics data other than the longitudinal velocity value in movement. Because of the reason that was previously discussed, it is necessary to consolidate the two parts as one routine program for design and development through the coordinate system connectivity, and presented here is a program named O-DYN. Using an object-oriented language C++, this program has a good structure with the valuable characteristics of objectivity, inheritance, and reusability. The reliability of this multi-body dynamics program is examined by DADS, which is the general dynamics program, using DAE solver and PECE integral function with the common coordinator separation method. As a result, we can obtain a better solution and total dynamics data in either area through this process. This program will be useful for analyzing full car simulation with powertrain.

• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• The Korean Journal of Archival Studies
• /
• no.4
• /
• pp.31-62
• /
• 2001

In this paper, I examined specific characteristics of the Tables of Transactions for Records Scheduling(TRS) (記錄物分類基準表 ; Kirokmul-Bulyukijun - Pyo) system by Public Records and Archives Act(PRA Act, No. 5709, 1999). All staffs and employees in governmental agencies of Korea must register, classify and dispose of their official records according to TRS by the Presidential Regulation for the application of PRA Act(No. 17050, 2000). Namely, the criteria of TRS is applicable to all stages of records lifecycle from creation to disposition(transfer to Archives or legal destruction). In the theoretical and methodological area, therefore, it is absolutely important that records managers and archival professionals in Korea make analysis on functions and characteristics of TRS by PRA Act. In the first, my examination take notice of possibility of 'adequate and proper documentation' about activity of the executive organization in TRS system. Other attention is that records management according to TRS means managing of records not only as physical entities but as logical entities which imply content and context of creation and use. In other hand, I wish to account for reasonable separation consideration for continuing utility of archives from current use of records throughout agencies duration Another theme of discussion in this paper is the theoretical framework which give account of TRS's characters. In conclusion, accountability for characteristics of TRS system could have been found in counterproposal view including the concept of Records continuum and the notion of Recordkeeping regime in Australia based on rethinking about Records lifecycle model. In the extent of practical area, more or less, it is imbalanced method that compare TRS by PRA Act to Recordkeeping regime based on Records continuum. Nevertheless, the concept and notion is suitable framework that give account of the prospect of recordkeeping system under PRA Act.as well as the meaningful characteristic of TRS.