• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.847-847
• /
• 2004

Automobile cooling fans are operated with a radiator module. To design low noise, high performance cooling fan, radiator resistance should be considered in the design process. The system (radiator) resistance reduces axial velocity and increases effective angle of attack. This increasing effective angle of attack mechanism causes blade stall, performance decrease and noise increase. In this paper, To analyze fan performance, freewake and 3D CFD calculations are used To design high performance fan with consideration of system resistance, optimal twist concept is applied through momentum and blade element theory. To predict fan noise, empirical formula and acoustic analogy methods are used.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.1-13
• /
• 1998

The basic heat transfer process that occurs in a building can best be illustrated by an electrical circuit network. Present paper reports the dynamic simulation of annual energy consumption in an office building by the thermal resistance capacitance network method. Unsteady thermal behaviors and annual energy consumption in an office building were examined in detail by solving the simultaneous circuit equations of thermal network. The results are used to evaluate the accuracy of the modified BIN method for the energy consumption analysis of a large building. Present thermal resistance-capacitance method predicts annual energy consumption of an office building with the same accuracy as that of response factor method. However, the modified BIN method gives 15% lower annual heating load and 25% lower cooling load than those from the present method. Equipment annual energy consumptions for fan, boiler and chiller in the HVAC system are also calculated for various control systems as CAV, VAV, FCU+VAV and FCU+CAV. FCU+CAV system appears to consume minimum annual energy among them.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.101-102
• /
• 2019

The use of high fluidity concrete has been added in recent construction work. In this study, we analyzed segregation resistance due to admixture substitution of the system high fluidity concrete that was hardened. The research results show that the resistance to segregation at the time of admixture replacement is improved. The best results were shown with a ternary system mixed like FA and BS.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.288-294
• /
• 2013

This paper introduces a novel method of on-line identifying the stator resistance and leakage inductance of dual three phase induction motor (DTPIM). According to the machine mathematical model, the stator resistance and leakage inductance can be estimated using the voltage and current values in harmonic subspace. Thus a method of voltage vector injection in harmonic subspace (VVIHS) is proposed, which causes currents in harmonic space. Then the errors between command and actual harmonic currents are utilized to regulate the machine parameters, including stator resistance and leakage inductance. The principle is presented and analyzed in detail. Experimental results prove the feasibility and validity of proposed method.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.89-93
• /
• 2002

Resistance performance of 6.67 G/T class fishing vessel is experimentally investigated in low and middle speed ranges to find out the effect of a new chine. The tests are performed for four different cases in the circulating water channel(CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics. The results show that the new chine can be one of the effective device to reduce the resistance.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1734-1736
• /
• 2004

Zn electrode is being widely used as an anode material in alkaline battery systems. However the corrosion resistance of Zn electrode in KOH electrolyte is very low. So, to improve the corrosion resistance of Zn electrode $Pb_3O_4$ was mixed to Zn material. And 5 wt.% Pb3O4 addition was most appropriate quantity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1913-1920
• /
• 1996

The purpose of this study was to reduce the airborne noise emitted from the package air-conditioner(PAC) therefore, the optimim design melthods of the fans and the flow-paths were investigated experimentally through the anlaysis of the nose problems caused by the conventional PAC system, and the fan performance tests and the systme resistance measurements of the parts which belong to the flow-paths of the PACwere used to study these noise problems. As a results, through the optimized flow-paths of the new PAC system with the lowset system resistance, and by adjusting and matching the operating point of each fan to each PAC system, the airborne noise reductions from the new indoor PAC and the outdoor one were achieved upto 5.5 dBA and 6.6 dBA respectively in overall noise level as compared with the conventional PAC system.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.1-4
• /
• 2013

The main objective was to design and develop a prototype robot system for assessing slip resistance. The developed robot system will be able to be used for stochastic nature of friction in the whole workplace. The second objective was to evaluate its operating condition in the laboratory, using a dreg sled type slipmeter(BOT-3000) as reference device. It was found that COF(Coefficient of Friction) measured with robot system was similar to that of BOT-3000 when sliding velocity was reached at 0.2m/s. The robot system might be the more promising one than any traditional measurement devices. A further evolution of prototype devices, as well as the development of test methods for that's various applications, is to be started in forthcoming studies.

• Journal of Aerospace System Engineering
• /
• v.8 no.2
• /
• pp.33-39
• /
• 2014

Feathering spindle is one of the critical parts of the rotor system in the Smart Unmanned Aerial Vehicle(SUAV) that it was manufactured with special material, Maraging C300. During the initial ground and tie-down flight tests of the SUAV, surface of the feathering spindle contacting to the needle-roller bearings showed excessive wear and dent due to high vibrating loads transferred from the rotating blades. Gas nitriding process was applied to the bearing contact surface of the feathering spindle to increase surface hardness so as to improve the surface defects. This paper briefly presents the gas nitriding process adopted and the spindle quality improvements including wear and corrosion resistance.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.744-754
• /
• 2016

Asphalt concrete track (ACT) is a track system connecting wide sleepers and concrete panels on top of an asphalt concrete layer; such a system requires adequate resistance force against various longitudinal and lateral external loads. In this study, a series of experiments were carried out to assess the longitudinal and lateral resistance force of a wide sleeper and concrete panel type ACT. The required shear resistance force of the horizontal displacement restraint device (HDRD) was evaluated. Furthermore, a concrete block type anchor and a steel pipe type anchor were developed as HDRDs. The shear resistance force was decided based on the experimental results of horizontal shear tests for each anchor system. In addition, proper numbers and arrangement design guidelines for the HDRDs were suggested considering the shear resisting capacity and economics for HDRDs applied to ACT.