• 대한건축학회논문집:구조계
• /
• 제34권9호
• /
• pp.11-18
• /
• 2018

As the height of the modular buildings increases, their stability becomes more and more dependent on the core. All traditional construction methods in structural concrete and steel can be utilized for cores in modular buildings but a core system with dry connection is more desirable to complete a greater degree of factory finish and faster erection of modular buildings. In order to do that, the hybrid PC(precast concrete) panel, which has a pair of C-shaped steel beams combined at the top and bottom of a concrete wall, was developed, In this study the cyclic lateral loading test on the hybrid PC panel is carried out and the panel configurations are examined to enhance the structural performance in comparison with the RC wall. Experimental results show that the strength of hybrid PC panel is about 70% of thar ot RC wall and the anchorage of vertical reinforcing bar welded to C-shaped steel beam needs to be improved.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1140-1148
• /
• 2006

이 논문에서는 압전션트를 이용한 지능패널의 투과 손실에 대해 연구하였다. 지능패널의 전기-기계 연성계수인 어드미턴스를 도입하여 션트 댐핑의 성능을 예측하였다. 유한요소를 사용하여 수치적인 어드미턴스를 계산하였고 실험결과와 비교하였다. 압전션트 시스템에서 소음 저감의 효과를 보여주기 위해 지능패널의 투과 손실을 연구하였다. 두 개의 모델을 사용하여 어드미턴스와 투과 손실과의 관계를 규명하였고 이 관계에서 어드미턴스를 지능패널의 설계 지수로 사용가능함을 발견하였다.

• 대한토목학회논문집
• /
• 제32권4A호
• /
• pp.245-253
• /
• 2012

본 연구에서는 장대터널이나 지하차도 등에 시공되는 횡류식 환기시스템을 구성하는 내화패널이 부착된 프리캐스트 풍도슬래브의 구조성능을 평가하기 위해서 실물모형 구조실험을 수행하였다. 또한, 내화패널의 휨강도와 Pull-off test를 통하여 내화패널과 슬래브의 부착성능 등의 기초성능을 우선적으로 확인하였다. 실물모형시험은 내화패널과 프리캐스트 PSC 슬래브의 정적 휨성능과 차량의 통행 시 발생하는 표면압력 이상의 하중에 대한 동적피로부착성능을 평가하였다. 동적피로하중 시험에서 내화패널과 PSC 슬래브 사이의 탈락이나 손상은 발생하지 않았으며, 정적재하시험에서도 매우 안정적인 거동을 보였으며, 하부에 부착된 내화패널의 탈락은 발생하지 않았다. 따라서 시공 중이나 시공 후 외부하중에 의해 내화패널의 탈락은 발생하지 않을 것으로 판단된다.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2219-2222
• /
• 2009

A new touch-sensitive hydrogenated amorphous silicon(a-Si:H) display with embedded optical sensor arrays is presented. The touch-sensitive panel operation was successfully demonstrated on a prototype of 16-in. active-matrix liquid crystal display (AMLCD). The proposed system provides the finger touched point without the real-time image processing of information of the captured images. Due to the simple architecture of the system, we expect the introduction of large-area touch-sensitive display panels.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.614-621
• /
• 2007

The fishing boat propulsion system employing the modified stern shape and the tunnel to protect a propeller is developed to increase the cruise speed and reduce he problem resulting from the open propeller accidentally catching the waste net and able on the sea. Using 3 different tunnel types, the model test was performed in the circular water channel and the panel method based on the potential theory is applied to analyze the open water performance of the propeller. In the numerical analysis using he potential-based panel method, it calculates the hydrodynamic interaction between the propeller and the tunnel and evaluates the effect of the tunnel geometry. From the numerical and experimental results differing tunnel geometries, the propulsion efficiency is increased by the larger diameter of the inlet than the outlet of the tunnel and the smaller gap between the propeller tip and the tunnel internal surface. These results provide the information of the propeller system with the tunnel and the hydrodynamic interaction between the propeller and the tunnel.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.103-111
• /
• 1994

An interactive and iterative design method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound layout of a control panel. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through iterative interactions with the designer. The existing panel design and layout methods are mostly based on the optimization of single objective function formulated to reflect and trade off all ergonomic design objectives which are largely different in their nature. In fact, the problem of seeking an ergonomically sound panel design should be viewed as a multiple objective optimization problem. Furthermore, most of the design objectives should be understood as constraints rather than objectives to be optimized. Hence, a constraint satisfaction approach is proposed in this study as a framework for the panel designer to search through the design decision space effectively and make various design decisions iteratively. In order to apply the constraint satisfaction approach to the panel design procedure, the ergonomic principles such as frequency-of-use, importance, functional grouping, and sequence-of-use are formalized as CSP terms. With this formalization, a prototype system was implemented and applied to panel layout problems. The results clearly showed the effectiveness of the proposed approach since it permits designers to consider and iteratively evaluate various design constraints and ergonomic principles, and, therefore, aids the panel designer to come up with an ergonomically sound control panel layout.

• 전기학회논문지P
• /
• 제53권4호
• /
• pp.183-189
• /
• 2004

In this paper, an automatic welding system is developed. In the developed system, an automatic welding system is remotely controlled by a portable panel PC. Additional, the DB system such as the operating condition and control data of automatic welding carriage is developed by ATMega128. Therefore, the developed system can overcome the restriction of operating condition, and reduce the weight of welding system and the risk of safety. The effectiveness of the developed system has been verified by the simulation and experimental results respectively.

• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.21-24
• /
• 2016

In this study, a optimal design on the hood automotive using eco-friendly natural fiber composites is performed. The hood of an automobile is determined by dividing the Inner panel shape through optimization phase to outer panel and inner panel. It was performed to optimize the size of the thickness of the inner panel and the outer panel by applying a flax/epoxy composite materials. The optimized shape was evaluated for weight-lightening, stability and the pedestrian collision safety. Through the resin flow analysis are confirmed to molding possibility judgment of product.

• 문화기술의 융합
• /
• 제5권2호
• /
• pp.355-360
• /
• 2019

본 연구에서는 고속열차 주행 중 발생하는 풍하중 안정성 검토조건을 준용하여, 열차속도 300km/h와 360km/h에 대한 고속선로용 고무보판 패널 구조의 열차 풍하중에 대한 구조적 안정성을 검토하였다. 이를 위해 고무보판 패널 시스템이 가장 복잡한 구성으로 설치될 수 있는 현장조건을 적용하여 3차원 해석모델링을 이용한 정밀 수치해석을 수행하였으며, 이를 통해 고속열차 풍하중에 대한 고무보판 패널 시스템의 구조적 안정성을 해석적으로 입증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.269-275
• /
• 2004

Photovoltaic(PV) system has been studied and watched with keen interest due to a clean and renewable power source. But, the output power of PV system is not only unstable but uncontrollable, because the maximum power point tracking (MPPT) of PV system is still hard with the tracking failure under the sudden fluctuation of irradiance. Authors suggest that the optimal voltage for MPPT be obtained by only solar cell temperature. Having an eye on that the optimal voltage point of solar cell is in proportion to its panel temperature, with operating the power converter whose operating point keeps its input voltage to the optimal voltage imagined by the surface's temperature of PV panel, the maximum power point becomes tenderly possible to be tracked. In order to confirm the availability of the proposed control scheme. And both control methods are simulated not only on the various angle of sampling time of switching control, but also with the real field weather condition. As the results of that, the conversion efficiency between PV panel and converter of the proposed control scheme was much better than that of the power comparison MPPT control, and what is better, the output voltage of PV panel was extremely in stable when the optimal voltage for MPPT is obtained by only solar cell temperature.