• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.147-153
• /
• 2012

The demands of the large scale machine tools, for instance, such as planomiller, turning machine, boring machine, NC machine, have been gradually increased in recent years. As the performances of machine tools and/or cutting tools are advanced, it is possible to perform high-speed and high-precision cutting works. The effective treatment of wet chip, which is discharged from cutting works, becomes very important problems. Therefore, this study is forced on the design of large scale machine tools using CATIA V5R18 and analysis of cutter, which is considered as essential equipment in large scale machine tools, using MSC.Nastran & MSC.Patran. Especially, the relations between tolerated load of cutter, driving horse power and rpm of driving shaft in chip processing system are investigated through analysis. As the results, the reliability of design could be improved by evaluating simulated numerical values, it showed that tolerated loads of supported part and edged part of cutter are 87,000N and 14,450N, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.641-648
• /
• 2002

The study on the chip waveform design to minimize multiple-access interference (MAI) and its performance evaluation are very important since chip waveform decides the signal quality and system capacity of the direct-sequence CDMA wireless communication system. This paper suggests the analytical chip waveform to minimize the MAI. The BER and throughput performances achieved by the proposed analytical optimum chip waveform are compared with those of the conventional chip waveforms in the Nakagami-m distribution frequency selective channel when the differential phase shift keying (DPSK) is employed in DS-CDMA system. From the numerical results, capacity and throughput are improved about 2 times and 1.4 times respectively when it is compared with the Kaiser chip waveform that is considered as one of the best in the conventional ones.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.122-128
• /
• 2008

Multiprocessor architectures and platforms, such as, a multiprocessor system on chip (MPSoC) recently introduced to extend the applicability of the Moore's law, depend upon concurrency and synchronization in both software and hardware to enhance design productivity and system performance. With the rapidly approaching billion transistors era, some of the main problem in deep sub-micron technologies characterized by gate lengths in the range of 60-90 nm will arise from non scalable wire delays, errors in signal integrity and non-synchronized communication. These problems may be addressed by the use of Network on Chip (NOC) architecture for future System-on-Chip (SoC). We have modeled a concurrent architecture for a customizable and scalable NOC in a system level modeling environment using MLDesigner (from MLD Inc.). Varying network loads under various traffic scenarios were applied to obtain realistic performance metrics. We provide the simulation results for latency as a function of the buffer size. We have abstracted the area results for NOC components from its FPGA implementation. Modeled NOC architecture supports three different levels of quality-of-service (QoS).

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.215-217
• /
• 2000

Protective relay play a crucial role in the proper operation of a power system, and the reliable transfer of electrical power. This paper deals with the design and implementation of a digital protective relay on a single chip. Implementation on the FPGA(Field Programmable Gate Array) of the chip of digital protective relay. This protective relaying chip monitors the frequency and the voltage and current of the power system. And report the voltage, the current. the frequency, active power and reactive power.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.161-172
• /
• 1994

This paper describes the design of a neurochip with on-chip learning capability in hardware with multiple processing elements. A digital architecture is adopted because its flexiblity and accuracy is advantageous for simulating the various application systems. The proposed chip consists of several processing elements to fit the large computation of neural networks, and has on-chip learning capability based on error back-propagation algorithm. It also minimizes the number of blobal control signals for processing elements. The modularity of the system makes it possible to buil various kinds of boards to match the expected range of applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.338-343
• /
• 2006

This paper describes about the design concept and the architecture of an economic VPN system which can perform fast crypto operations with cheap cost. The essence of the proposed system architecture is consisting of the system with two companion chips dedicated to VPN: one chip is a multi-purpose network processor for security machine and the other is a crypto acceleration chip which encrypt and decrypt network packets in a high speed. This study also addresses about some realizations that is required for fast prototyping such as the porting of an operating system, the establishment of compiler tool chain, the implementation of device drivers and the design of IPSec security engine. Especially, the second chip supports the most time consuming block cipher algorithms including 3DES, AES, and SEED and its performance was evaluated.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.2
• /
• pp.55-58
• /
• 2012

This study is concerned about the design and structural analysis of high integrated Chip Bonding Machine. Recently, many studies have been undergoing to reduce a working time in a field of Chip Bonding Machine. Chip Bonding Machine belongs to reduce a stand-by time by Chip Moving time. The developed system can save tool moving distance in small space than other machine. The analysis is carried out by SoldEdge & Ansys software.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.22-30
• /
• 2009

Due to high levels of integration and complexity, the Network-on-Chip (NoC) approach has emerged as a new design paradigm to overcome on-chip communication issues and data bandwidth limits in conventional SoC(System-on-Chip) design. In particular, exponentially growing of energy consumption caused by high frequency, synchronization and distributing a single global clock signal throughout the chip have become major design bottlenecks. To deal with these issues, a globally asynchronous, locally synchronous (GALS) design combined with low power techniques is considered. Such a design style fits nicely with the concept of voltage-frequency-islands (VFI) which has been recently introduced for achieving fine-grain system-level power management. In this paper, we propose an efficient design methodology that minimizes energy consumption by VFI partitioning on an NoC architecture as well as assigning supply and threshold voltage levels to each VFI. The proposed algorithm which find VFI and appropriate core (or processing element) supply voltage consists of traffic-aware core graph partitioning, communication contention delay-aware tile mapping, power variation-aware core dynamic voltage scaling (DVS), power efficient VFI merging and voltage update on the VFIs Simulation results show that average 10.3% improvement in energy consumption compared to other existing works.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1137-1140
• /
• 1999

In this thesis, we research about Communication System Construction and Test-Bed Realization Method and Software’s Design with written program into Embedded Micro Controller’s restricted memory region using a DSP Chip to deal with mainly high speed communication. Tools used for modern communication network control use TI or AMD general chip class, but nevertheless responsibility for the point at issue, Analog Device is architecture design model moderated for small communication system. In this thesis, we present extended model, and realize basic case.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1418-1423
• /
• 2009

This paper describes the design and implementation of a System-on-a-Chip (SoC) for image processing applications to use in wearable/mobile products. The target Soc consists of LEON 2 core, AMBA/APB bus-systems and custom-designed controllers. A new FPGA-based prototyping platform is implemented and used for design and verification of the target SoC. To ensure that the implemented SoC satisfies the required performances, an image processing application is performed.