• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2059-2063
• /
• 2009

This paper presents a programmable System-On-a-chip (SoC) for various embedded smart applications that need Neural Network computations. The system is fully implemented into a prototyping platform based on Field Programmable Gate Array (FPGA). The SoC consists of an embedded processor core and a reconfigurable hardware accelerator for neural computations. The performance of the SoC is evaluated using a real image processing application, an optical character recognition (OCR) system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.86-93
• /
• 2010

A system-on-chip (SoC) includes more functions and requires rapidly increased data bandwidth as the development of semiconductor process technology and SoC design methodology. As a result, the data bandwidth of on-chip-networks in SoCs becomes a key factor of the system performance, and the research on the on-chip-network is performed actively. Either AXI or OCP is considered to a substitute of the AHB which has been the most popular on-chip-network. However, they have much increased number of signal wires, which make it difficult to design the interface logic and the network hardware. The compatibility of the protocols with other protocols is not so good. In this paper, we propose a new interface protocol for on-chip-networks to improve the problems mentioned above. The proposed protocol uses less number of signal wires than that of the AHB and considers the compatibility with other interface protocols such as the AXI. According the analysis results, the performance of the proposed protocol per wire is much better than that of the AXI although the absolute performance is slightly inferior.

• Applied Microscopy
• /
• v.50
• /
• pp.22.1-22.6
• /
• 2020

In-situ transmission electron microscopy (TEM) holders that employ a chip-type specimen stage have been widely utilized in recent years. The specimen on the microelectromechanical system (MEMS)-based chip is commonly prepared by focused ion beam (FIB) milling and ex-situ lift-out (EXLO). However, the FIB-milled thin-foil specimens are inevitably contaminated with Ga⁺ ions. When these specimens are heated for real time observation, the Ga⁺ ions influence the reaction or aggregate in the protection layer. An effective method of removing the Ga residue by Ar⁺ ion milling within FIB system was explored in this study. However, the Ga residue remained in the thin-foil specimen that was extracted by EXLO from the trench after the conduct of Ar⁺ ion milling. To address this drawback, the thin-foil specimen was attached to an FIB lift-out grid, subjected to Ar⁺ ion milling, and subsequently transferred to an MEMS-based chip by EXLO. The removal of the Ga residue was confirmed by energy dispersive spectroscopy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.331-337
• /
• 2001

The purpose of this study is to analyze the principal causes of vibration problem and find out the method of vibration reduction in a chip-mount system. The principal causes are investigated through measurements of vibration spectrum and model parameters. Modal parameters are obtained by using an experimental model test. Based on the model parameters from experiments. a model of finite element method is formulated. The model presents effective redesign of increasing the natural frequencies in order to reduce the vibration of a chip-mount system. Further, through computer simulation for the behavior of head to be main vibration source, the best acceleration pattern of head movement can be verified to achieve effective head-positioning and reduce the vibration due to head movement.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.399-402
• /
• 2004

This paper presents a system-on-chip prototype implementing a full integration for a portable digital audio system. The chip is composed of a audio processor block to implements audio decoding and voice compression or decompression software, a system control block including 8-bit MCU core and Memory Management Unit (MMU) a low power 16-bit ${\Sigma}{\Delta}$ CODEC, two DC-to-BC converter, and a flash memory controller. In order to support other audio algorithms except Mask ROM type's fixed codes, a novel 16-bit fixed-point DSP core with the program-download architecture is proposed. Funker, an efficient power management technique such as task-based clock management is implemented to reduce power consumption for portable application. The proposed chip has been fabricated with a 4 metal 0.25um CMOS technology and the chip area is about 7.1 mm ${\times}$ 7.1mm with 100mW power dissipation at 2.5V power supply.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.53-59
• /
• 2011

In this study, a two-phase closed loop cooling system is desinged and tested for a laptop computer using a FC-72. The cooling system is characterized by a parametric study which determines the effects of existence of a boiling enhancement microstructure, initial system pressure, volume fill ratio of coolant and inclination angle of condenser on the thermal performance of the closed loop. Experimental data show the optium condition when the volume ratio of working fluid is 70%, the pump flowing is 6ml/min, and the inclination angle of condenser is $0^{\circ}$. This research shows the maximum values which can dissipate 33W of chip power with a chip temperature maintained at $95^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.229-236
• /
• 2005

Testing time and power consumption during testing System-On-a-Chip (SOC) are becoming increasingly important as the IP core increases in a SOC. We present a new algorithm to reduce the scan-in power and test data volume using the modified scan latch reordering. We apply scan latch reordering technique for minimizing the hamming distance in scan vectors. Also, during scan latch reordering, the don't care inputs in scan vectors are assigned for low power and high compression. Experimental results for ISCAS 89 benchmark circuits show that reduced test data and low power scan testing can be achieved in all cases.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.215-217
• /
• 2000

Protective relay play a crucial role in the proper operation of a power system, and the reliable transfer of electrical power. This paper deals with the design and implementation of a digital protective relay on a single chip. Implementation on the FPGA(Field Programmable Gate Array) of the chip of digital protective relay. This protective relaying chip monitors the frequency and the voltage and current of the power system. And report the voltage, the current. the frequency, active power and reactive power.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1229-1235
• /
• 2006

A lab-on-a-chip (LoC) was designed for simultaneous monitoring of microorganisms, antibiotic residues, somatic cells, and pH in raw milk. The LoC was fabricated from polydimethylsiloxane (PDMS) using microelectromechanical system (MEMS) technology, which consisted of two parts; a protein array and microchannel. The protein array was fabricated by immobilizing five types of antibodies corresponding to two microorganisms, two antibiotic residues, and somatic cells. A sol-gel film was deposited on a glass substrate to immobilize the antibodies. The target analytes in raw milk could be bound with the corresponding antibody by an immunoreaction, and the antigen-antibody complex was detected using fluorescence microscopy. SNARF-dextran was used as a pH indicator, and the SNARF-entrapped hydrogel was attached to the microchannel in the chip. After injecting the milk sample into the channel, the pH was measured by monitoring the change in fluorescence intensity by fluorescence microscopy. The on-chip simultaneous assay of two microorganisms (E. coli O157:H7 and Streptococcus agalactiae), two antibiotic residues (penicillin G and dihydrostreptomycin), and neutrophils was successfully accomplished using the proposed LoC system.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.115-118
• /
• 2000

A microfabricated cell chip was developed to evaluate drug effect on mouse B16-F1 melanoma cell line. The cell chip system consists of 8-well culture cartridge incorporated with interdigitated array gold electrodes on each well, lock-in amplifier, 8-well cell scanner and computer as a system controller. Impedance of an electrode is increased according to adherent cell growth on the electrode surface. In order to verify investigated. The change of impedance was measured differentially between a control electrode containing only media and cell-cultured sample electrodes with time.