• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.713-734
• /
• 2013

Bridges are vital components of the railroads. High speed of travel, the periodic and oscillatory nature of the loads and the comparable vehicle bridge weight ratio distinguish the railway bridges from the road bridges. The close proximity between estimations by some numerical methods and the measured data for the bridge-vehicle dynamic response under the moving load conditions has boosted the confidence in the numerical analyses. However, there is hardly any report regarding the responses of the railway bridges under the effect of the trains entering from the opposite directions while running at unequal speed and having dissimilar geometries. It is the purpose of this article to present an analytical method for the dynamic analysis of the railway bridges under the influence of two opposing series of moving loads. The bridge structural damping and many modes of vibrations are included. The concept of modal superposition is used to solve for the system motion equations. The method of solution is indeed a computer assisted analytical solution. It solves for the system motion equations and gives output in terms of the bridge deflection. Some case studies are also considered for the validation of the proposed method. Furthermore, the effects of varying some parameters such as the distance between the bogies, and the bogie wheelset distance are studied. Also, the conditions of resonance and cancellation in the dynamic response for a variety of vehicle-bridge specifications are investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.171-176
• /
• 2011

The purposes of the research were to evaluate system performance and response of building structure under external load for full scale modal-testing-tower applied toggle bracing and lead rubber damper(LRD). The dynamic properties of the structure were measured before and after installing damper under harmonic excitation using the AMD and the results were compared. The harmonic excitation condition is to increase 0.01Hz sine sweep signal from 0.49Hz to 0.63Hz. As a result of measuring resonant frequency, before installing damper is 0.55Hz and after installing damper is 0.62Hz. The experimental results after installing damper were also distinguished from simulation results and the main cause of this results is temperature dependency property of rubber material.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.1-8
• /
• 2011

Ocean structures and vehicles are exposed to severe ocean environment conditions such as waves, winds and currents. When such ocean structures and vehicles are designed, an accurate structure analysis is required to keep the system safely. Hydro-elastic analysis is one of key issues to design such structures and vehicles. In many previous investigations, numerical analyses for hydro-elastic problem have been used. In this study, an experimental analysis is carried out and the circular cylindrical shell is considered. Dynamical characteristics for a circular cylindrical shell are identified by experimental vibration analysis in air and water. The natural frequencies and mode shapes are compared in air and water to obtain hydro-elastic effects. Some interesting results are found in the variation of natural frequencies and damping ratios of the circular cylindrical shell for different water contact depths.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.597-602
• /
• 2006

In this paper, a proper support tuning method is established by identifying the dynamic characteristics of the machine, the floor. and the inertia force. Also, the limitation of a passive isolation is presented. To simplify the dynamic analysis and to establish a proper design method for supporting system, each of the machine and the floor is modeled as a single degree of freedom spring-mass-damper system under careful investigation of the dynamic characteristics of each system and appropriate assumptions. Then, the dynamic behavior of a 2DOF system and the effect of the mass and the damping are investigated. Also, the characteristics of motion profiles are investigated. In addition, a quasi-static analysis on the transmitted force through support is performed and related tests are performed.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.99-107
• /
• 2000

In this study, a static and dynamic characteristics analysis system for machine tool spindle systems with 3 lobe sliding bearing is developed based on Timoshenko theory, finite element method and windows programming techniques. And the characteristics value of 3 lobe sliding bearing such as eccentricity ratio, attitude angle, friction coefficient , stiffness coefficients, damping coefficients and so on, are determined by using the thermal equilibrium conditions of spindle systems. Since the developed system has various analysis modules related to static deformation analysis, modal analysis, frequency responses analysis and so on, it can be utilized to perform systematically the design an devaluation process of spindle systems with 3 lobe sliding bearing under windows GUI environment.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.541-557
• /
• 2020

A novel family of controllable, dissipative structure-dependent integration methods is derived from an eigen-based theory, where the concept of the eigenmode can give a solid theoretical basis for the feasibility of this type of integration methods. In fact, the concepts of eigen-decomposition and modal superposition are involved in solving a multiple degree of freedom system. The total solution of a coupled equation of motion consists of each modal solution of the uncoupled equation of motion. Hence, an eigen-dependent integration method is proposed to solve each modal equation of motion and an approximate solution can be yielded via modal superposition with only the first few modes of interest for inertial problems. All the eigen-dependent integration methods combine to form a structure-dependent integration method. Some key assumptions and new techniques are combined to successfully develop this family of integration methods. In addition, this family of integration methods can be either explicitly or implicitly implemented. Except for stability property, both explicit and implicit implementations have almost the same numerical properties. An explicit implementation is more computationally efficient than for an implicit implementation since it can combine unconditional stability and explicit formulation simultaneously. As a result, an explicit implementation is preferred over an implicit implementation. This family of integration methods can have the same numerical properties as those of the WBZ-α method for linear elastic systems. Besides, its stability and accuracy performance for solving nonlinear systems is also almost the same as those of the WBZ-α method. It is evident from numerical experiments that an explicit implementation of this family of integration methods can save many computational efforts when compared to conventional implicit methods, such as the WBZ-α method.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권3호
• /
• pp.122-132
• /
• 2005

This paper presents a novel approach based on Prony method to analysis of small signal stability in power system. Prony method is a valuable tool in identifying transfer function and estimating the modal parameter of power system oscillation from measured or computed discrete time signal. This paper define the relative residue of time signal and propose the condition to select low frequency oscillation in each generator. This paper describes the application results of proposed algorithm with respect to KEPCO systems. Simulation results show that the proposed algorithm can be used as another tools of power systems analysis.

• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2010

A camera module is supported by a gimbal structure in collection equipment of image information. During flight, the gimbal system undergoes serious accelerations with wide frequencies. To get the correct images, the camera module must be stably vibrated under these conditions. If natural frequency unfortunately exists in a exciting frequency range, resonance occurs there. Hence, harmonic responses analysis is needed to know correct vibration characteristic of the gimbal system. Finite element analysis was performed to get an acceleration of the gimbal system by mode superposition after extracting mode shapes and natural frequencies. Considering damping ratio of 2%, the reponses of gimbal structure were calculated from excitations with a design frequency band. As results, a maximum acceleration transmissibility, which is the ratio of response to excitation, was obtained and it can be used to design the gimbal structure effectively.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.138-146
• /
• 1996

The presence of a damage, such as a crack, in a structure increases the flexibility and damping in the structure. Most of methods to detect damage or damage location uses stiffness matrix of the structural system. The modification of stiffness matrix, however, has complicated procedures to identify structural. system in the basis of finite element model and has too many degree of freedom to calculate. Identification of changes of flexibility of structure can offer damage information immediately and simple procedure can employ real time continuous monitoring system. To identify changes of the flexibility, vibration mode shapes and natural frequencies are usually used. In this paper, a procedure for damage location in continuous girder bridges using vibration data is described. The effectiveness and sensitivity of the presented method to measurement errors in mode shapes and natural frequencies are investigated using analytical results from finite element models. It is shown that the errors in the first mode shape and first natural frequency demonstrate much larger influence than those in the higher mode shapes and modal frequencies.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.675-681
• /
• 1988

본 연구에서는 표면감쇠처리되지 않은 구조물의 모우드특성을 아는 경우에 표 면감쇠처리에 의해서 결정되는 새로운 오무드변수를 계산하는 한 방법을 제시하고자 한다.즉, 실험적으로 측정된 점탄성물질의 동특성으로부터 표면감쇠처리되기 전의 모우드를 이용하여 표면감쇠처리된 구조물의 모우드감쇠와 고유진동수 및 주파수응답 함수를 계산한다. 이 과정을 Fig.1에 보여진, 표면감쇠처리된 네 개의 보와 하나의 집중질량으로 구성된 부정정계 구조물에 적용 서술하고자 한다.