• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.517-526
• /
• 2013

Lifelong education promotion business to be the first to promote lifelong education promotion accountable to the governor of the city, the Lifelong Education Act Amendment (2007.12) emphasis on the research area 6 Lifelong Education and Lifelong Education Institute is established if analyzes what Gyeongsangnam-do lifetime policy implications for the promotion of education and implications are derived(through AHP). The results were as follows: occupational skill enhancement education (0.335) as the priority section. The development of life education policy (0.238) is the primary work process that must be initiated for the Gyeongnam life education promotion policy appropriate for the region's situation. This was followed by the development and distribution of life education program (0.148), construction of a connective system between life education organizations within the province (0.139) Raised the need to promote lifelong Education strategies, five core strategic industry linkages through regional industrial policy to keep pace with the flow of business for the Advancement of Education for the development and activation of Gyeongsangnam-do in a lifetime.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.9-16
• /
• 2016

Wireless sensor networks (WSN) are composed of sensor nodes and a base station. The sensor nodes deploy a non-accessible area, receive critical information, and transmit it to the base station. The information received is applied to real-time monitoring, distribution, medical service, etc.. Recently, the WSN was extended to mobile wireless sensor networks (MWSN). The MWSN has been applied to wild animal tracking, marine ecology, etc.. The important issues are mobility and energy consumption in MWSN. Because of the limited energy of the sensor nodes, the energy consumption for data transmission affects the lifetime of the network. Therefore, efficient data transmission from the sensor nodes to the base station is necessary for sensing data. This paper, proposes an energy consumption model using two-tier clustering in mobile sensor networks (TTCM). This method divides the entire network into two layers. The mobility problem was considered, whole energy consumption was decreased and clustering methods of recent researches were analyzed for the proposed energy consumption model. Through analysis and simulation, the proposed TTCM was found to be better than the previous clustering method in mobile sensor networks at point of the network energy efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.1-9
• /
• 2017

Recently, the active research into wireless sensor networks has led to the development of sensor nodes with improved performance, including their mobility and location awareness. One of the most important goals of such sensor networks is to transmit the data generated by mobile sensors nodes. Since these sensor nodes move in the mobile wireless sensor networks (MWSNs), the energy consumption required for them to transmit the sensed data to the fixed sink is increased. In order to solve this problem, the use of mobile sinks to collect the data while moving inside the network is studied herein. The important issues are the mobility and energy consumption in MWSNs. Because of the sensor nodes' limited energy, their energy consumption for data transmission affects the lifetime of the network. In this paper, a mobile-sink based energy-efficient clustering scheme is proposed for use in mobile wireless sensor networks (MECMs). The proposed scheme improves the energy efficiency when selecting a new cluster head according to the mobility of the mobile sensor nodes. In order to take into consideration the mobility problem, this method divides the entire network into several cluster groups based on mobile sinks, thereby decreasing the overall energy consumption. Through both analysis and simulation, it was shown that the proposed MECM is better than previous clustering methods in mobile sensor networks from the viewpoint of the network energy efficiency.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.285-294
• /
• 2013

The purpose of this study was to provide fundamental information for success factors of techniques through kinematic analysis including coordination of lower extremities and landing stability according to the success and failure of $540^{\circ}$ Dwihuryeochagi in Taekwondo. Twenty Taekwondo athletes: ten success group (S, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) and ten failure group (F, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) participated in this study. Three-dimensional motion analysis using a system of 3 video cameras with a sampling of 60 fields/s was performed during the competition of $540^{\circ}$ Dwihuryeochagi. Motions were divided into five events: pivot foot landing (E1), pivot foot toe off (E2), COM max height (E3), kick impact (E4) and landing (E5). At E1, the stride width was greater for S than for F (p<.05) while the time was greater for S than for F during P4 (p<.05). At E4, knee angle was greater for S than for F (p<.05). At E5, hip angle was greater for S than for F (p<.05) while kick distance was greater for S than for F (p<.05). Furthermore, at P3, the time would be related to kicking velocity (p<.05), while at P4, the time, range of hip angle and knee angle would be related to kick distance (p<.05). At P1, COM horizontal velocity would be related to COM vertical velocity of P1 and P2 (p<.05). Based on the findings, success factors of $540^{\circ}\acute{y}$ Dwihuryeochagi were COM horizontal velocity of P1, COM vertical velocity of P2, the time, kick distance, velocity, angle of lower extremities and coordination of P3-P4.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.461-465
• /
• 2016

n-type silicon shows the better tolerance towards metal impurities with a higher minority carrier lifetime compared to p-type silicon substrate. Due to better lifetime stability as compared to p-type during illumination made the photovoltaic community to switch toward n-type wafers for high efficiency silicon solar cells. We fabricated the front electrode of the n-type solar cell with AgAl paste. The electrodes characteristics of the AgAl paste depend on the contact junction depth that is closely related to the firing temperature. Metal contact depth with p+ emitter, with optimized depth is important as it influence the resistance. In this study, we optimize the firing condition for the effective formation of the metal depth by varying the firing condition. The firing was carried out at temperatures below $670^{\circ}C$ with low contact depth and high contact resistance. It was noted that the contact resistance was reduced with the increase of firing temperature. The contact resistance of $5.99m{\Omega}cm^2$ was shown for the optimum firing temperature of $865^{\circ}C$. Over $900^{\circ}C$, contact junction is bonded to the Si through the emitter, resulting the contact resistance to shunt. we obtained photovoltaic parameter such as fill factor of 76.68%, short-circuit current of $40.2mA/cm^2$, open-circuit voltage of 620 mV and convert efficiency of 19.11%.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.20-31
• /
• 2007

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the NBR compound was prepared by sulfur-cure system, and was used in predicting the lifetime of rubber gasket made by the compound. The accelerated material aging was investigated at different temperatures at 120, 140 and $160^{\circ}C$ and aging time from 3 hours to 600 hours at 5, 6, 7 vol %. of $H_2SO_4$ concentrations The rubber strips were placed in acid solution using pyrex g1ass tube. Both ends of pyrex g1ass tube were sealed to avoid evaporation of solution during heating at given time. The material test and accelerated acid-heat aging test were carried out to predict the useful life of NBR rubber gasket for a fuel cell stack. In order to investigate the effects of acid-heat aging on the properties of the NBR, tensile strength, elongation at break, hardness and crosslink-density were measured. The tensile strength decreases as the $H_2SO_4$ concentrations and temperature increase. Results were evaluated using Arrhenius equation.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.173-180
• /
• 2014

The purpose of this study was to investigate the effect of combined exercise on injury risk factors of lower extremity during landing. Ten sports talented athletes participated in this study. Sports talented athletes participated in a combined exercise (sports talented exercise, coordination) for 16 weeks. A three-dimensional motion analysis was performed using eight infrared cameras (sampling rate of 100 Hz), one force plate, and electromyography system (sampling rate of 1000 Hz) during landing. Kinetic, and kinematics analysis including average impulsive force, angle of lower extremity, vertical stiffness, onset of muscle activation were calculated by Matlab2009a software. Paired t-test was performed at alpha=.05. The average impulsive force in landing phase was not statistically significant (t=-.748, p=.474). The hip joint angle was more decreased in post test compared to pre test (E1: t=2.682, p=.025, E2: t=5.609, p=.000, E3: t=2.538, p=.032). The knee joint (E1: t=-.343, p=.739, E2: t=1.319, p=.220, E3: t=.589, p=.570) and ankle joint (E1: t=.081, p=.937, E2: t=.784, p=.453, E3: t=.392, p=.704) angle were tended to decrease after combined exercise. The vertical stiffness was tended to decrease after combined exercise (t=1.972, p=.080). Onset of quadriceps femoris (t=.698, p=.503) and medial gastocnemius (t=1.858, p=.096) were tended to be faster than biceps femoris (t=-.333, p=.747) after combined exercise. Although thses findings were not statistically significant except on a hip joint angle, risk factors of lower extremity such as joint angle, vertical stiffness and onset of quadriceps femoris, medial gastrocnemius were positively changed after the combined exercise but an additional training for improved onset of biceps femoris would be required in the future.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.413-424
• /
• 2009

Wireless sensor network is based on an event driven system. Sensor nodes collect the events in surrounding environment and the sensing data are relayed into a sink node. In particular, when events are detected, the data sensing periods are likely to be shorter to get the more correct information. However, this operation causes the traffic congestion on the sensor nodes located in a routing path. Since the traffic congestion generates the data queue overflows in sensor nodes, the important information about events could be missed. In addition, since the battery energy of sensor nodes exhausts quickly for treating the traffic congestion, the entire lifetime of wireless sensor networks would be abbreviated. In this paper, a new congestion control method is proposed on the basis of genetic algorithm. To apply genetic algorithm, the data traffic rate of each sensor node is utilized as a chromosome structure. The fitness function of genetic algorithm is designed from both the average and the standard deviation of the traffic rates of sensor nodes. Based on dominant gene sets, the proposed method selects the optimal data forwarding sensor nodes for relieving the traffic congestion. In experiments, when compared with other methods to handle the traffic congestion, the proposed method shows the efficient data transmissions due to much less queue overflows and supports the fair data transmission between all sensor nodes as possible. This result not only enhances the reliability of data transmission but also distributes the energy consumptions across the network. It contributes directly to the extension of total lifetime of wireless sensor networks.

• 한국노년학
• /
• v.31 no.4
• /
• pp.939-967
• /
• 2011

This study observed elderly women's adaptation process on separation by death in rural areas through grounded theory approach and developed its entity theory. Participants for this study were 14 elderly women who have lost their husbands in the last 12 months. The study was conducted for 8 months starting January 2010. Each interview per session took 40 to 90 minutes, study notes were taken on site, and recorded contents were transcribed by the researcher which was myself. The research data were collected by in-depth interview and with help of local community's nurses who were in charge of taking care of the participants. The collected data were analyzed by applying Strauss & Corbin's grounded theory (1998). As a result of study, 80 concepts, 28 subcategories, and 12 categories were deducted during open coding process. Adaptation process on separation by death was process of 'finding a way to live alone' which used strategy of 'attempting a make changes in life', and 'embracing the situation' which were influenced by conciliatory conditions of 'degree on economic condition', 'change in health', and 'supporting system' which focuses on phenomenon of 'bearing life alone' which is influenced by context condition of 'marital chemistry of couples during lifetime', and 'the couple's leadership during lifetime' together with casual conditions of 'the fall of wall'. The adaptation process accordance to time flow were divided into 4 steps which were step of 'shock and release of emotions', step of 'longing and resentment', step of 'resignation and acceptance', and step of 'life's restructure'. Above results suggest right directions for welfare for the aged and process of 'finding a way to live alone' for participants by controlling several factors and using intervention strategy, and provided basic data required for developing and applying practical welfare mediation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.