• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.204-205
• /
• 2015

Exterior insulation board in cast-in-place concrete form system could reduce construction period and improve quality in apartment construction. However, the method is progressed with insulation and concrete frame works at the same time, then risk is increased in duration control and quality management. Therefore, this paper analyzed risk factors through FMEA method. We found that the key risk factors delaying schedule was insulation material that soaked in the rain and quality defects on the insulation material joint. Based on this research, the risk management approach should be developed for improvement of method activation.

• 한국식품저장유통학회지
• /
• 제5권2호
• /
• pp.127-132
• /
• 1998

In order to fad out an efficient way of topdressing nitrogen fertilizer in mulch-cropping system of onion(Allium cepa L.), solid, slow-release, and liquid forms of nitrogen fertilizers were allied to cv. 'Changnyungdaego' various number of times at different time, with 5 topdress applications of solid fertilizer serving as a control. Whole basal application of conventional solid fertilizer and 2 slow-release fertilizers were labor-saving and showed improved storage quality of bulbs, but resulted in poor plant growth and considerably low yield due to fertilizer shortage from early April. This suggests that topdress application is necessary. Liquid form of nitrogen fertilizer was more effective for plant growth and yield and saving labor than the solid form. Early applications was effective for increasing yield and storage quality of onion bulbs harvested. Thus two applications of liquid form of nitrogen fertilizer in February and March at rome month interval are recommended in mulch crowing system of onion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.21-24
• /
• 2006

In recent, there are a lot of problems such as shortage of construction workers, complicate progress of work and so on under RC construction. To solve these problems, the construction methods without form-work are used in the main structural members - beam, slab and stairs. However, there isn't yet form-workless system for columns. The purpose of this study was to experimentally evaluate the structural behavior of full scaled no-form system columns reinforced with steel sheet forms and angles. The main variables are 1) comparison of concrete member strength with and without reinforcement, 2) effect of L-angle.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.201-206
• /
• 2003

Power system is analyzed by three methods of load flow, fault calculation, and voltage stability. Among there, load flow is calculated to flow of power in power in system at steady state. But, load flow is difficult to analyze to flow of power in substation, because power flow frequently alter by various equipments such as circuit bleaker, disconnect switch and shunt reactor. Particular, in 765[㎸] system, because of form of 1.5GB for stable operation, structure of substation has been very complex. In this paper, we describe technique for application of load flow algorithm in simulator for 765[㎸] substation. For this technique, we built each database for various equipments and considered form of 1.5GB Data as form of bus and line, for application of load flow, are acquired from built database, and then calculate load flow in substation. And. results of load flow are outputted in screen of operator console program.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.1014-1018
• /
• 2012

This paper presents a decentralized controller design for formation flying of multiple satellites based on the overlapping decomposition technique. Each satellite is assumed to avail only the information of its own and in front of itself, which restricts the structure of a controller gain matrix to an overlapped form. The concerned large-scale system is expanded using the overlapping decomposition technique. Design condition is represented in terms of linear matrix inequalities with small-scale systems in a decentralized form, based on the expanded system. The resulting controller is contracted to the original overlapped form so as to close the original system. A numerical simulation shows the effectiveness of the proposed technique.

• 디자인학연구
• /
• 제13권3호
• /
• pp.39-48
• /
• 2000

본 연구는 제품 디자인 프로세스중 아이디어나 디자인의 가능성에 대하여 탐색하는 부분을 중심으로 디자인 목표가 명확하게 정해지지 않은 상황하에서 1. 시각적으로 형태발상 지원시스템을 구축하여 디자이너에게 형태발상 능력의 한계를 극복할 수 있도록 지원하고, 2. 또한 사용자 참여적 형태발상 시스템으로서 웹 상에서 사용자들의 요구에 실시간으로 다이나믹하게 이미지를 생성해주고 사용자들의 선호도를 분석하여 선호도가 높은 이미지에 대한 정보를 디자이너에게 제공하는 즉 디자이너가 사용자들의 의견을 수렴할 수 있도록 하고, 3. 선호도가 낮은 이미지들은 누락시키고 지속적으로 새로운 이미지 조합을 업데이트하여 사용자의 형태 및 칼라에 대한 선호추세를 파악하여 미래에 선호될 수 있는 칼라와 이미지를 생성할 수 있도록 하였다. 이는 제품 디자인 개발 프로세스 중 아이디어발상 또는 형태 발상 지원에 대한 한 방식으로 그 효과가 있으리라 기대된다.

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.708-715
• /
• 2016

This study researched the sizing system of dress form for apparel manufacturing in the domestic market. It aims to be used as basic data for the development of a dress form that could be used by manufacturers of senior men's clothing. Research focused on the sizes presented on the homepages of 17 dress form manufacturers in the USA, France, Japan, and Korea. Body measurement was made for senior men in their 50's over men (n=134). Six items were measured by the 'Standard body measurement of Size Korea'. The type of dress form in the domestic market can be classified into half-body type (upper body type and lower body type), torso, and whole-body type; in addition, each type is divided into upper arm, arm, crotch, and thigh. Korean dress form manufacturers produced/sold diverse kinds (size 7-9) for women; however, they used large/small sizes or product sizes for men without defining sizes. The chest size (93-105cm) has not been standardized while the rates of waist circumference, hip circumference and shoulder length (in accordance with the chest size) were all different. Global dress form brands manufactured reflecting body dimensions by the state organization USA ASTM. Japan JIS. For this reason, most domestic clothing businesses depend on imported dress forms. Especially, there were no dress forms for senior men. With the growing market for seniors, it would be necessary to produce senior dress forms for clothing production that reflect the body shapes and sizes of seniors.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.271-278
• /
• 2016

국내 철도 및 도로 교량의 대표적 상부구조 형식인 철제 (steel box 또는 H-형강) 거더교와 PSC (Pre-Stressed Concrete) 거더교는 현재 가장 많이 시공되는 교량형식으로 전체 교량의 75%, 시공 금액의 80%를 차지하고 있다. 거더교 상판 콘크리트 타설을 위한 거푸집 공사는 여러 가지 시공의 어려움 때문에 다양한 공법이 개발 및 적용되었다. 그러나 재료 손실 및 인건비 상승으로 인한 원가 상승, 미숙련공에 의한 품질 저하, 복잡한 시공방법으로 인한 공기 증가, 생산성 저하, 고소작업으로 인한 안전사고 발생, 큰 부재로 인한 운송성 저하, 재료 특성으로 인한 유지관리비 증가 등 여러 가지 문제가 부분적으로 해결되지 않았다. 이를 해결하기 위하여 기존 공법을 대체할 수 있는 공법이 필요하다. 따라서 본 연구는 거더교 상판 콘크리트 타설용 시스템 거푸집 (Purlin Hanging System Form)의 개발 연구 및 경제성 분석을 목적으로 한다. 본 연구를 통해 Purlin Hanging System Form이 기존 공법에 비해 60%의 원가절감, 80%의 공기단축 효과가 있음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.67-79
• /
• 2000

Critical loads and load-carrying capacities for steel scaffolds used as shoring systems were compared using computational and experimental methods in Part I of this paper. In that paper, a simple 2-D model was established for use in evaluating the structural behavior of scaffold-shoring systems. This 2-D model was derived using an incremental finite element analysis (FEA) of a typical complete scaffold-shoring system. Although the simplified model is only two-dimensional, it predicts the critical loads and failure modes of the complete system. The objective of this paper is to present a closed-form solution to the 2-D model. To simplify the analysis, a simpler model was first established to replace the 2-D model. Then, a closed-form solution for the critical loads and failure modes based on this simplified model were derived using a bifurcation (eigenvalue) approach to the elastic-buckling problem. In this closed-form equation, the critical loads are shown to be function of the number of stories, material properties, and section properties of the scaffolds. The critical loads and failure modes obtained from the analytical (closed-form) solution were compared with the results from the 2-D model. The comparisons show that the critical loads from the analytical solution (simplified model) closely match the results from the more complex model, and that the predicted failure modes are nearly identical.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.61-68
• /
• 1999

The variety of crystalline structure and mechanical properties of PP filament treated with dry heat treatment at different draw ratio has been studied. Crystalline structure and mechanical properties of annealed PP filament at different draw ratio has been examined by XRD, UTM, and density method. Heat treatment has been carried out $100^{\circ}C$, $120^{\circ}C$ $140^{\circ}C$ for 30min. in dry oven. From the results of this study, it found the following facts. It was found that the crystallinity and crystallite size of (110) plane of sample were increased with increasing of annealed temperature and draw ratio. The crystalline form of annealed sample which was undrawn showed ${\alpha}$, ${\beta}$ mixing form below $120^{\circ}C$ and showed ${\alpha}$ form at $140^{\circ}C$. But the crystalline form of annealed sample which was drawn showed ${\alpha}$ form at $120^{\circ}C$. Initial modulus and tensile strength were increased with increasing of annealing temperature, and the degree of orientation was decreased with decreasing of annealing temperature.