• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.215-217
• /
• 1997

In many conventional analysis of voltage stability the effect of load characteristics is ignored. But in the real system the load is composed of various components. Therefore if the load composition could be modeled then it will plays an important role in the analysis of static voltage stability. And also, if the system loss generally imposed to slack bus in the conventional load flow calculation is redistributed to each generator the accuracy of static voltage stability analysis can be improved. This paper presents the effect of load composition in the analysis of system stability as well the loss redistribution algorithm. And this paper will compare the result of conventional method with that of the proposed method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.1
• /
• pp.99-112
• /
• 1994

An important modelling requirement for multimedia systems is the representation of temporal constraints among several different media that ordinarily arise in multimedia application. The multimedia system which integrates various types of data is required to express voice, image, text and graphic data with simultaneousness or an arbitrary time intervals. The purpose of this study is to analyze the temporal reationships and synchronization among several different kinds of medium. Moreover, it proposes a Multimedia Display-Time Composition Model (MDTC Model) which guarantees a representation of any kind of temporal synchronization among more than two kinds of medium. The proposed model is applied to a company advertizing system. Finally, a multimedia authoring tool based on the MDTC Model is implemented.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2252-2254
• /
• 2002

The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in Reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the Reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed composition of diagnostic system reactor internal structures using neutron noise(RIDS).

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.4
• /
• pp.4-13
• /
• 2008

This study intended to put information regarding space composition and functional relationship together and analyze them, and finally offers some suggestions. For the field survey, built questionnaire and drawings analysis were used in this study. Architectural programming offers basic information for design : putting field survey factors together and analysing them. It interacts with each part of design as well. In the initial stage of architectural design, the quality of information is very decisive in the quality of design. In this sense, analysing basic information such as floor space compositive system is required to rationalizing space and functional programing in the elementary school design.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.892-897
• /
• 2008

A new ethanol dehydration process utilizing a thermally coupled distillation column is proposed to reduce the energy requirement of the existing dehydration processes. An entrainer of benzene is used in the proposed system having the column profile similar to the equilibrium composition profile for the maximum distillation column efficiency, and the feed composition is arranged to close to the boundary of different distillation regions. It is found that the proposed distillation system gives some 18% of energy saving over the existing process. In addition, design guidelines are suggested for other azeotropic distillation process.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.107-108
• /
• 2007

In this paper, the EM wave absorbers were designed and fabricated for collision-avoidance radars using Carbon of a dielectric material and Permalloy of a magnetic material with CPE, because radar system has some problems including false image and system-to-system interference. We fabricated some samples in different composition ratio of Carbon and Permalloy, and defined that optimum composition ratios of Carbon and Permalloy with CPE were Carbon:CPE=20:80 wt% and Permalloy:CPE=70:30 wt%. And absorption abilities at different thicknesses of the EM wave absorbers were simulated using the material properties. The EM wave absorbers were manufactured based on the simulated design. Simulated and measured results agree very well.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.294-299
• /
• 1998

To prove pseudo-homopolymerization(PHP) method indirectly for general system which includes more than one growing radicals per particle, Mayo-Lewis equation of bulk copolymer system was derived form probability equation about instantaneous copolymer composition of emulsion copolymer system during interval II. From Extended Smith-Ewart equation proposed by Ballard et al. in emulsion copolymerization, exact solution was obtained for 0-1 system (i.e., the system containing no more than one growing radical per particle). From the exact solution, average number of radicals per particle and instantaneous copolymer composition were predicted to reach the steady state which a few minutes. So the reliability of this approximation method could by proved directly for 0-1 system. Styrene-butadiene(St-Bu) and Styrene-methyl methacrylate (St-MMA) system were used for model calculations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.171-183
• /
• 2016

Small-scale maps currently used are made by scanning and editing printed maps and its shortcoming is accumulated errors at the time of editing and low accuracy. TM projection method is used but its accuracy varies. In addition, small-scale maps are made without consideration of usability and compatibility with other scale maps. Therefore, it is necessary to suggest projection and coordinates system improvement methods in consideration of usability and compatibility between data. The results of this study reveal that in order to make the optimum small-scale map, projection that fits the purpose of map usage in each scale, coordinate system and neat line composition should be selected in consideration of interrelation and compatibility with other maps. Conic projection should be used to accurately illustrate the entire country, but considering usability and compatibility with other maps, traversing cylindrical projection should be used instead of conic projection. For coordinates system of the small-scale map, Universal Transverse Mercator (UTM-K) based on the World Geodetic System should be used instead of conventional longitude and latitude coordinate system or Transverse Mercator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.399-402
• /
• 2002

This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$，$6{\mu}m$，$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.

• Korean Institute of Interior Design Journal
• /
• v.15 no.4 s.57
• /
• pp.106-114
• /
• 2006

The purposes of natural science museums are to educate the general public on the principles and application of science, and help them understand various aspects of science technology. Data should be analyzed by considering these educational aspects of exhibition, and the methods of presenting exhibits should be decided. Accordingly, the composition of exhibition contents with various exhibition elements has an important role at natural science museums. The relation and structure of exhibition themes are significant factors in helping visitors understand the principles of science and a system of viewing circulation can be used as an important tool for understanding the flow of exhibition. In other words, at the planning stage for the composition of exhibition contents, the relation of exhibition themes as well as the circulation patterns of viewers can induce active viewing behaviors. Therefore, centering on the patterns of viewing circulation as well as on the connectivity of exhibition themes at natural science museums, the purposes of this research are: 1) to conceptualize the composition of exhibition contents; and 2) to find elements that can induce active viewing behaviors by analyzing visitors' viewing behaviors. This research was establishing an analytical indicator of contact for viewing behaviors observed from the composition of exhibition scenarios, the active viewing patterns of engagement, first contact, and repeated contact were analyzed. First, a composition pattern with a high participation rate, in contact with exhibits, was found to induce an overall-viewing circulation and have a big ring of the composition of exhibition themes. Second, by inducing a partial-viewing circulation pattern, a high rate of first contacts was observed from a ring pattern of theme connection. Even for the structure with theme connection with depth, a high frequency of contacts with various exhibits was found when exhibition themes have a ring pattern. Third, the repeated contacts were mostly found in the form of scenarios, which has a successive structure of ring and cross patterns.