• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.793-798
• /
• 2005

The performance functions of a suspension must provide often place conflicting demands upon rail bogie design since design parameters which may be altered to improve performance in one area may simultaneously reduce performance in another area. To determine compromised design parameters, it is need to carry out a number of simulations and trade-off studies. The suspension design system based on computer simulations is presented. The system is composed of analysis solvers and GUI which have functions such as modeling, analysis and sensitivity analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.103-108
• /
• 1999

This paper describes development of a new automated real-time system which preforms measurement data reduction and management, geotechnical backanalysis, and feedback design for embankment construction on soft ground. Such a system can be an effective, useful and economical tool for managing a large site development on soft ground. The system consists of data base system to characterize soil properties and identify instrumentation, analysis system for ground behavior and stability coupled with automatic monitoring system, and feedback design system which is a new technique to reflect the analysis of measured ground behavior against original design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.208-211
• /
• 2005

This paper describes the development process of steering system for reduce idle vibration through the data level of frequency and sensitivity. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between NVH performance and fuel economy. The target frequency of the steering system is set by benchmarking of a competitive vehicle and the vibration mode map is used to separate steering column modes from resonance of body structure and engine idle rpm. This paper descirbes the analysis approach process for high stiffness of steering system and the design guideline is suggested about steering column and support system by using mother car at initial design stage. We used a patent map in order to analyze accurately a technical trend and suggested the design process using dynamic damper of steering system considering sensitivity. And we established techniques of analysis on steering system and evaluated the level of accuracy of analysis through correlating the test and analysis results. It makes possible to design the good NVH performance vehicle at initial design stage and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.38-44
• /
• 1996

The CAD system for design and drawing of limit gauges was constructed and developed. This system was made by Visual Basic program. Using this system, drawings together with concerned data for the manufacturing of limit gauges are generated on the screen, file and printer. The data base was constructed by referring handbooks, textbooks, relevant standards and regulations. This system was proved a powerful tool for design and drawing of limit gauges by actual applications. The output drawings from this system are in good agreement with the drawings and data of the concerned standards and regulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.786-792
• /
• 2006

The design of experiment(DOE) with orthogonal arrays is adopted when the engineering design is needed in a discrete design space. In this research, a design process with orthogonal array is peformed to obtain the optimum design which satisfy the frequency target of the steering system. The optimum design is determined from the analysis of means(ANOM) and sensitivity information about design variables is evaluated by the analysis of variance(ANOVA). Interactions between design variables are investigated to achieve additivity which should be valid in using orthogonal array. It is shown that when strong interactions exist, the DOE process with orthogonal array considering interaction is introduced to find out optimum design.

• 한국레이저가공학회지
• /
• 제10권3호
• /
• pp.15-24
• /
• 2007

In this paper laser micromachining system design process for commercialization is suggested. The constructed system design process is properly adjusted for laser micromachining area after tailoring engine process of system engineering process such as requirement analysis, functional analysis and allocation, system synthesis and system optimization process. In the current laser machining system design, system components and specifications are determined on the basis of experimental experience which a laser is being used in machining some materials as well as the current machining and research trend. In this paper, however, systematic process is suggested in addition to experimental experience, which the laser and system components and their specifications are decided in the process of definition of functional requirements and engine design variables of system to satisfy the customer's requirements.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.101-108
• /
• 2012

본 연구 결과는 해상풍력발전시스템 타워 내부에 설치하는 서비스리프트의 설계 및 구조해석에 대한 내용이며, 공학적 설계법 및 수치해석에 의한 구조해석을 통하여 서비스리프트의 안정성 및 신뢰성을 확인하였다. 설계의 주된 내용은 설계 허용한계 이내에서 만족스러운 성능으로 지상으로부터 타워상부의 해상풍력터빈 너셀까지 작업자와 수리보수용 장비를 안전하게 수송할 수 있는 충분한 능력을 확보하는 것이다. 구조해석을 통하여 서비스리프트 캐빈 및 안전장치의 총변형량과 등가응력에 대해서 검토하여 설계 시 적용한 안전율의 타당성을 검토하였다.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.838-842
• /
• 2009

Vibrational analysis is presented for a visual alignment system of nano-imprint process in this study. For a nano-imprinting equipment, the visual alignment system is one of the essential parts in order to align the mold into the target panel. For the precision alignment, the vibration from inside and outside of the vision system should be avoided, and the elimination of the vibration should be considered in the design process of the visual alignment design. In this work, vibrational characteristics for the vision system frame is analyzed and topology optimization of a frame section area is carried out. With the results of the analysis, a new frame design are suggested. Design consideration for constructing a visual alignment system in view of optimal design is also discussed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1221-1226
• /
• 2008

Present, the cooling method of using a phase-change heat transfer such as immersed type, heat pipe etc is applied in cooling of high-capacity power semiconductors of the main power system for the high speed train with the concentrated traction. In order to apply these phase-change cooling system to the high speed EMU to be developed, needed are technological researches of consideration of installing space, air passage, light weight material and miniaturization. Although this research establishes design specifications through theoretical analysis and computational analysis from the basic design process of the cooling system of the propulsion system for the high-speed EMU, when details design is completed, present improvement subject and optimum design before manufacturing the prototype of the cooling system on the basis of analysis results. And then, carried out will be the performance tests through prototype manufacture and reliability estimation by components of cooling system.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1901-1910
• /
• 2023

The safety-class (1E) digital control system (DCS) of nuclear power plant characterized structural multiple redundancies, therefore, it is important to quantitatively evaluate the reliability of DCS in different degree of backup loss. In this paper, a reliability evaluation model based on T-S fuzzy fault tree (FT) is proposed for 1E DCS of nuclear power plant, in which the connection relationship between components is described by T-S fuzzy gates. Specifically, an output rejection control system is chosen as an example, based on the T-S fuzzy FT model, the key indicators such as probabilistic importance are calculated, and for a further discussion, the T-S fuzzy FT model is transformed into Bayesian Network(BN) equivalently, and the fault diagnosis based on probabilistic analysis is accomplished. Combined with the analysis of actual objects, the effectiveness of proposed method is proved.