• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.167-171
• /
• 2003

CMP(Chemical Mechanical Planarization) slurry for STI process is made by mechanically synthesized$CeO_2$as abrasive. The abrasive can be stabilized by electrostatic or steric stabilization in aqueous slurry and steric stabilization is more effective for long-term stability. Blanket-type$SiO_2$and $Si_3N_4$ wafers are polished with CMP slurry containing$CeO_2$synthesized in 50$0^{\circ}C$ or $700^{\circ}C$. Removal rate and surface uniformity of$SiO_2$and$Si_3N_4$wafer and selectivity are influenced by synthetic condition of abrasive, suspension stability and pH of slurries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3433-3440
• /
• 1996

This paper was investigation of the stres corrosion cracking(SCC) mechanism and the properties of corrosion fracture surface of glass fiber reinforced plastics(GFRP) produced by hand lay up(HLU) method in synthetic sea water. Test material is GFRP, that was used vinylester type epoxy acrylate resin and an unsaturated polyester as the matrix and the chopped strand mat(CSM) type E-glss fiber as the reinforcement. The slow strain rate test(SSRT) was performed on dry, wet and saturated wet specimens in sea water. Here the pH concentration of synthetic sea water was 8.2 and the strain rate is 1 x $10^{-6}$($sec^{-1}$) and test temperature ranges varied from $-60^{\circ}C$ to $80^{\circ}C$. It could be confirmed the fact that wet specimens tested at a particular test temperature ranges were appeared the eviences of SCC such as con-planar, mirror and hackle zone. Moreover, SCC of GFRP in sea water was characterised by falt fracture surfaces with only small amounts of fiber pull-out, in partial.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.747-753
• /
• 2004

In this paper, nanocrystalline indium tin oxide (ITO) particles were fabricated by using synthesis without harmful elements. The synthetic method is to eliminate the chloridic and nitridic elements which are included in the current wet type synthetic method. Therefore, it is possible to lower synthetic temperature below 600 $^{\circ}C$ to eliminate the harmful elements. Accordingly, fine particle can be achieved by applying the process. Particle size, surface area, crystal structure, and composition ratio of the synthesized nanocrystalline ITO particle by using the method were analyzed with high resolution transmission electron microscopy (HRTEM), BET surface area analyzer, X-ray diffraction (XRD), and energy dispersion spectroscopy (EDS). As a result, its particle size is less than 10 nm, and the surface area exceeds 100 m$^2$/g. The XRD analysis indicates that the cystal structure of the powder is cubic one with orientation of <222>, <400>, <440>. Also, the analysis of the composition demonstrates that the around 8 wt% tin is uniformly included in In$_2$O$_3$ lattice of the nanoparticle.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.464-468
• /
• 1999

The effectiveness of current biodegradation test methods for degradable polymers under controlled composting conditions was studied in regards to the test temperature and compost condition. When biodegradability tests for the natural (starch, cellulose, PHB/HV) and synthetic (PCL, SG, PLA) polymers were conducted at temperature levels of 35 and $55^{\circ}C$ with compost cured at ambient temperature, the degradations of cellulose and starch were higher at $35^{\circ}C$ because of the priming effect. On the other hand, degradations of other polymers were higher at $55^{\circ}C$. In the biodegradation test at $55^{\circ}C$, compost harvested right after the thermophilic degradation stage showed higher biodegradation activities than the cured compost for both the synthetic aliphatic polyester (SG) and a natural polymer, cellulose. These results suggest that the biodegradation test conducted at $55^{\circ}C$ with the compost, harvested right after the thermophilic degradation stage during composting, showed the highest biodegradation activity under controlled composting conditions.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2001.06a
• /
• pp.149-153
• /
• 2001

To investigate the mode of bactericidal action for antimicrobial peptide, pediocin, synthetic and mutant pediocins were prepared by direct chemical synthesis. Native pediocin was purified from Pedio-coccus acidilactici M and its conformational structure and bactericidal functions were analyzed and compared to synthetic pediocin. Schematic mode of pediocin actions, how pediocin binds on the target cell membrane, penetrates and makes tunnel are proposed. For these purposes, primary and secondary structures of pediocin was analyzed and disulfide bond assignment was also done. The pediocin purified from P. acidilactici M had high effective bactericidal ability against gram positive bacteria, especially Listeria monocytogenes and was very stable at extreme pHs and even at high temperatures such as autoclaving temperature (121$^{\circ}C$). Pediocin was consisted of 44 amino acids with four cysteines. Novel synthetic peptides were achieved by solid phase peptide synthesis(SPPS) method. To explain the function of cysteine in C-terminal region, mutant pediocin, Ped[C24A＋C44A], was synthesized and their structural and biological functions were analyzed. Second mutant pediocin, Ped[KllE], was prepared to explain the function of lysine at 11 of N-terminal part of pediocin, especially loop of $\beta$-sheet, and to predict the initial binding site of pediocin. The native and synthetic pediocins was showed random coil conformation by spectropolarimetry in moderate conditions. This conformation was observed in extreme conditions such as high temperature and low and high pHs, also. Circular dichroism(CD) data also showed the existence of $\beta$-turn structure in N-terminal part both native and synthetic pediocins. A structural model for pediocin predicts that 18 amino acids in the N-terminal part of the peptide assume a three-strand $\beta$-sheet conformation. This random coil in C-terminal part of pediocin was converted to folding structure, helix structure, in nonpolar solvents such as alcohol and TFE. The disulfide bond between $^{9}$ Cys and $^{14}$ Cys was concrete and inevitable, however, evidences of disulfide bond between $^{24}$ Cys and $^{44}$ Cys was not. Data of Ped[C24A＋C44A], pediocin mutant showed that $^{44}$ Cys was required during killing the target cells but not inevitable, since Ped[C24A＋C44A] still have bactericidal activity but much less than native pediocin. Another pediocin mutant, Ped[KllE], had still bactericidal activity, was controversial to propose that positive charge like as $^{11}$ Lys in loop or hinge in bacteriocin bound or helped to binding to microorganism with electrostatic interaction between cell membrane especially teichoic acid and positive amino acid nonspecifically. The conformation of pediocin among native, synthetic and mutant pediocins did not show big difference. The conformations between oxidized and reduced pediocin were almost similar regardless of native or synthetic.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.619-627
• /
• 2000

Historically, dyed textiles were symbols of status and, because of their expense, reserved only for people of wealth and specalist, Early dye sources probably included plant, animal and mineral extracts. As synthetic dyes have been developed, beginning with synthetic indigo in 1897, reliance on natural dye sources diminished. But renewed interest in natural dyes is fueled by a pro-environment consumer aware of the ecological liabilities of the dye industry. Han Jee was imported from China where it was influenced to period of the three kingdoms(Silla, Baekje, Kokuryo). After that, Han Jee was used for paper in old Korea for long thime before paper was came with civilization. In this paper, dyeing of Han Jee with loess were investigated according to dyeing temperature, dyeing time, loess concentration, and effects of additives. As a reuslts, λmax of Han Jee dyed by loess was 710nm. ΔE values of Han Jee increased by loess concentration, dyeing time, dyeing temperature. Dyeing with additives treatment increased dyeability. Especially, Han Jee treated with aluminium acetate shows the largest dyeability of the Han Jee. The Han Jee dyed loess had very good lightfastness.

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.645-651
• /
• 2005

The purpose of the study was to investigate the thermophisiological responses and subjective wearing comfort for the six lining fabrics of one-piece dress in summer environment. There were significant differences in the microclimate, the mean skin temperature and the subjective wear comfort for the lining fabrics. The mean skin temperature of rayon and acetate were lower than that of synthetic fiber. The wearing comfort of rayon and acetate were better than that of synthetic fiber. There were clear correlations between the mechanical properties and the subjective wear comfort of lining fabrics. The hygroscopicity and density of textile affected the humidity and tactile sensation of dress, and they were important factors determining the wearing comfort of one-piece dress.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.529-537
• /
• 2003

This study was conducted to manufacture the soluble micro-fiber and to synthesize low melting polymer for the interior fabric not to use the polyurethane resin causing some problems. Low melting polyester for weft yarn was introduced by adding 30-40 mol% ratio of isophthalic acid to a main chain of polyethylene terephthalate to decrease the melting temperature up to heat setting temperature. Micro-fiber for warp yarn consisted of both soluble and insoluble components with multi-layered structure. When the soluble micro-fiber was treated by alkaline hydrolysis with 3-5% concentration of NaOH, it showed the turning point at 28% weight loss since soluble polyester was hydrolyzed approximate five times faster than regular polyester.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.364-368
• /
• 2002

Optimal synthetic conditions of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by Box and Wilson. Barium chloride and Sodium sulfate were utilized as reactants in order to prepare barium sulfate in this study. The optimum Synthesis conditions of barium sulfate obtained from this study are as follows; Reactant temperature; 60~75$^{\circ}C$ (viewpoint of yield) and 60~71$^{\circ}C$ (viewpoint of bulkiness). Concentration of two reactants; 12.7~14.4％ (viewpoint of yield) and 5~10.5％ (viewpoint of bulkiness). Mole ratio of two reactants, [BaCl$_2$]/[Na$_2$SO$_4$]; 1.62~1.96 (viewpoint of yield) and 2.0 (viewpoint of bulkiness). Reacting time; 13~15 minutes (viewpoint of yield) and 12~14 minutes (viewpoint of bulkiness). Drying temperature of product; 86~10$0^{\circ}C$ (viewpoint of yield) and 6$0^{\circ}C$ (viewpoint of bulkiness).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.339-339
• /
• 2011

진공 플라즈마와 달리 개방된 공간에서 방전되는 대기압 플라즈마는 진공상태에서 수행되는 에칭, 증착 등의 복잡한 플라즈마 공정을 경제적이고 신속하게 수행할 수 있어, 최근 들어 연구가 활발히 진행 중이다. 이와 관련하여 He, Ar, $N_2$, $O_2$, Air 등의 여러 종류의 기체를 50 kHz 고전압에서 방전하여 대기 중에서 저온 플라즈마 공정이 가능한 아크젯 타입의 플라즈마 소스를 개발하였다. 개발된 플라즈마 소스에서는 입력전압, 기체유량, 노즐의 구조와 크기 등의 여러 운전변수에 따라 플라즈마의 방전특성이 변화되었다. 특히 본 연구에서는 아크젯의 플라즈마 발생부의 물질성분(SUS, Aluminum, Cupper)에 따른 플라즈마의 기체온도 및 전자여기 온도의 변화를 광방출분광법(OES)를 이용한 Synthetic spectrum method와 Boltzmann plot method을 통해 살펴보았다. 전압-전류 특성곡선, 시간분해 이미지 촬영법, 기체온도 측정법 등을 이용하여 발생된 플라즈마의 물리적인 특성을 분석하였다. 특히 물질의 성분에 따라 발생되는 플라즈마의 기체 및 전자여기 온도가 이차 전자 방출계수 및 물질의 전도도와의 상관관계가 있는지 연구가 진행 중이다.