• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.4
• /
• pp.43-53
• /
• 1997

In this research, the synthetic livestock wastewater was prepared to study the characteristics of organic matter removal, the change of VFA production, and the amount of gas production with respect to the change of ammonium nitrogen concentration in the waste using anaerobic fixed bed process, which is an anaerobic biofilm process. The HRT and operation temperature were 1 day and $35{\pm}1^{\circ}C$, respectively. Also, the characteristics of organic matter removal and the inhibitory effect on microorganism in the anaerobic process were studied on the organic loading and ammonium nitrogen concentration. The results obtained were as follows: For COD loading of $10kg/m^3$-day and five levels of ammonium nitrogen concentration ranging from 1,000 to 5,000 mg/L, organic removal efficiencies were about 81, 74, 67, 58, and 51%, and gas productions were 3,860, 3,520, 3,240, 3,020, and 2,790 ml/l-day, respectively. Average methane contents in the gas produced on COD loading of $10kg/m^3$-day was about 76%. Throughout the whole period of experiment, remaining VFA (as COD base) in the effluent was over 90% of remaining COD. This result indicated the inhibitory effect of high concentration of ammonium nitrogen through the facts that accumulated VFA was almost COD and organic removal efficiency decreased also with the increase of ammonium nitrogen. Especially, that implys which high concentration of ammonium nitrogen not only inhibits methane forming bacteria, but also acid forming bacteria.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.52-59
• /
• 2007

This paper confirms that high solid coating can increase coating speed and reduce drying cost. Low solid coating color with the synthetic thickener and high solid coating color with the rheology modifier and with higher ratio of GCC were prepared. Coated paper was then produced with an industrial coater, varying coating speed and dryer temperature in order to keep the moisture content of the coated paper constant. Coating color concentration was able to be increased from 66% to 69% and from 68% to 71% without an adverse effect on coating color rheology. With a help of the rheology modifier, the increased ratio of GCC in high solid coating did not show harmful effects on the coated paper quality.

• Journal of Korean Society on Water Environment
• /
• v.18 no.2
• /
• pp.113-122
• /
• 2002

A bench-scale anoxic membrane bioreactor (MBR) system, consisting of a bioreactor coupled to a ceramic crossflow ultrafiltration module, was evaluated to treat a synthetic wastewater containing alkaline hydrolysis byproducts (hydrolysates) of RDX, The wastewater was formulated the same as RDX hydrolysates, and consisted of acetate, formate, formaldehyde as carbon sources and nitrite, nitrate as electron accepters. The MBR system removed 80 to 90% of these carbon sources, and approximately 90% of the stoichiometric amount of nitrate, 60% of nitrite. The reactor was also operated over a range of transmembrane pressures, temperatures, suspended solids concentration, and organic loading rate in order to maximize treatment efficiency and permeate flux. Increasing transmembrane pressure and temperature did not improve membrane flux significantly. Increasing biomass concentration in the bioreactor decreased the permeate flux significantly. The maximum volumetric organic loading rate was $0.72kg\;COD/m^3/day$, and the maximum F/M ratio was 0.50 kg N/kg MLSS/day and 1.82 kg COD/kg MLSS/day. Membrane permeate was clear and essentially free of bacteria, as indicated by heterotrophic plate count. Permeate flux ranged between 0.15 and $2.0m^3/m^2/day$ and was maintained by routine backwashing every 3 to 4 day. Backwashing with 2% NaOCl solution every fourth or fifth backwashing cycle was able to restore membrane flux to its original value.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.151-159
• /
• 2008

The flame-retardant coatings were prepared by blending the synthesized triphosphorus modified polyester in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. It was confirmed that no deterioration of physical properties of PU coatings was observed with the increasing phenylphosphonic acid (PPA) contents. Flame retardancy was tested by a $45^{\circ}$ Meckel burner method and LOI method. With the $45^{\circ}$ Meckel burner method, CATBTP-20C and CATBTP-30C that contain 20 wt% and 30 wt% of PPA, flame retarding component, respectively, showed the first grade flame retardancy with $2.8{\sim}3.9\;cm$ of char length ; and, with LOI method, they exhibited a good flame retardancy as a range of $30{\sim}32%$ of combustion values.

• Preventive Nutrition and Food Science
• /
• v.3 no.2
• /
• pp.163-168
• /
• 1998

Inhibitory effect of indole oligomers induced from indole-3-carbinol(I3C) on the growth of breast cancer cells was studied. We gernerated the reaction mixtures (RXM) at ambient temperature by treating a stirred aqueous solution of I3C (typeically 0.25ml) at a concentration of 12 $\mu$mol/ml) with hydrochloric acid (typically 28$\mu$l of a 1 mmol/ml solution). RXM was fractionated by the column chromatography. The fractions with similar UV-pattern were further fractionated by HPLC and 3.3'-diindoylmethane (DIM) and other indole oligomers were identified. I3C, RXM, and it derived indole compounds were added to MCF-7 cells and cultured in the presence of 10-7M estradiol for 7 days. the growth-inhibitory effect of I3C and DIM on the growth of MCF-7 cell was very strong. The synthetic DIM also revealed antiproliferative effect on MCF-7 cel. The fractions containing high DIM content (77%), were most effective in inhibiting MCF-7 cell growth induced by estradiol. With these results, we suggest that I3C and DIM might have anticarcinogenic effect on the breast cancer.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.1-5
• /
• 2018

In this study, we designed and synthesized novel thermal radical initiators of BTAP (1-phenyl-3,3-dipropyltriazene), BTACP (1-(phenyldiazenyl)pyrrolidine), BTACH (1-(phenyldiazenyl)piperidine), and BTACH7 (1-(phenyldiazenyl)azepane) based on a triazene moiety to provide a thermal initiator for radical polymerization. The synthetic method is valuable due to the simplicity. In addition, the synthesized thermal initiator did not affect the color of the polymer. Among the four initiators, the polymerization time for the BTACH of the 6-membered ring decreased by 67%, as opposed to the polymerization time without initiator. Conversion after polymerization was over 92%. DSC experiments also showed that the initiator with hexagonal rings had the lowest peak polymerization temperature of $160^{\circ}C$. Our study suggests a promising new initiator system that is effective for radical polymerization.

• YAKHAK HOEJI
• /
• v.38 no.5
• /
• pp.488-495
• /
• 1994

To evaluate the feasibility of transmucosal delivery of leucine enkephalin (Leu-Enk) and its synthetic analog, $[D-Ala^2]$-leucine enkephalinamide (YAGFL), their physicochemical stabilities in aqueous buffered solutions were first investigated using a stability indicating high performance liquid chromatography. The degradation of Leu-Enk and YAGFL followed the pseudo-first-order kinetics. From the pH-rate profiles, it was found that the maximal stability of the two pentapeptides was at the pH of about 5.0. The shelf lives $(t_{90%})$ for the degradation of Leu-Enk and YAGFL at pH 5.0 and $40^{\circ}C$ were found to be 48.13 and 50.9 days, respectively. From the temperature dependence of the degradation, activation energies for Leu-Enk and YAGFL were calculated to be 13.61 and 13.47 kcal/mole, respectively. A higher ionic strength and a higher initial peptide concentration in buffered solution slowed the degradation of the two pentapeptides. The addition of 2-hydroxypropyl-${\beta}$-cyclodextrin into the peptide solution did not affect the stability significantly.

• BioChip Journal
• /
• v.12 no.4
• /
• pp.268-279
• /
• 2018

Flower-shaped organic-inorganic hybrid nanostructures, termed nanoflowers, have received considerable recent attention as they possess greatly enhanced activity, stability, durability, and even selectivity of entrapped organic biomolecules, which are much better than those from the conventional methods. They can be synthesized simply via co-incubation of organic and inorganic components in aqueous buffer at room temperature and yield hierarchical nanostructures with large surface-to-volume ratios, allowing for low-cost production by easy scale-up, as well as the high loading capacity of biomolecules without severe mass transfer limitations. Since a pioneering study reported on hybrid nanoflowers prepared with protein and copper sulfate, many other organic and inorganic components, which endow nanoflowers with diverse functionalities, have been employed. Thanks to these features, they have been applied in a diverse range of areas, including biosensors and biocatalysis. To highlight the progress of research on organic-inorganic hybrid nanoflowers, this review discusses their synthetic methods and mechanisms, structural and biological characteristics, as well as recent representative applications. Current challenges and future directions toward the design and development of multi-functional nanoflowers for their widespread utilization in biotechnology are also discussed.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.199-207
• /
• 2020

Recently, as the demand for masks increases, the use of filter-replaceable cotton masks is increasing. A filter-replaceable cotton mask is one of the ways to solve the environmental problems of a disposable nonwoven mask because only the filter can be replaced after washing. Cotton fiber products are known to be environmentally friendly, but cotton products dyed with general synthetic dyes are not safe for humans. In this study, to prepare of cotton mask applied with natural dyeing, the optimal dyeing conditions are set when dyeing with gallnut extract. A polychromatic natural dye that changes color by mordant, and the functionalities of gallnut dyeing fabrics are evaluated. The experimental method is dyed the gallnut by temperature and time by concentration to set the optimal conditions. The color fastness rating grade of aluminium potassium sulfate dodecahydrate, copper(ll) sulfate pentahydrate, and iron(ll) chloride tetrahydrate were evaluated after the pre/post mordanting.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.284-293
• /
• 2022

After extracting the calcium component from the KR slag and the converter slag using ammonium chloride solution, the extract was reacted with carbon dioxide to synthesize precipitated calcium carbonate (PCC). In order to understand the effect of ultrasonic waves on calcium extraction from slags and calcium carbonate synthesis, the efficiency of calcium carbonate synthesis according to the with or without of ultrasonic waves was analyzed. The synthetic efficiency of PCC was investigated according to various experimental conditions, and the synthesized calcium carbonate was analyzed using XRD and SEM. In both slags, the amount of PCC decreased as the reaction temperature increased. The pH at the end of the experiment capable of synthesizing the maximum PCC in the carbonation reaction was 7 (irradiated with ultrasound) and 8 (irradiated without ultrasound), respectively. Because the pH of the extraction filtrate is different when irradiated with or without ultrasound, the pH was adjusted to 9 by injecting an additive (10 M NaOH) before the carbonation experiment, and then the experiment was performed. When calcium was extracted from KR slag, the crystal phase appeared as calcite regardless of the pH at the end of the experiment. However, when calcium was extracted from the converter slag and the pH was set to 7 at the end of the experiment, the crystal phase of PCC appeared as a mixture of calcite and vaterite.