• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.739-740
• /
• 2006

According to the rapid growth of high speed and precise industry, the application of synchronous motor has been increased. In the application fields, the large synchronous motor is not a self-starting motor. The rotor is heavy and, from a dead stop, it is impossible to bring the rotor into magnetic lock with the rotating magnetic field for this reason, all synchronous motor have some kinds of starting device. A simple starter is another motor which brings the rotor up to approximately 96 percent of it synchronous speed. The starting motor is disconnected and the rotor locks in step with the rotating field. The more commony used starting method is to have the rotor to include a squirrel cage indution winding. This indution winding brings the rotor almost to synchronous speed as an induction motor. So, this paper describes excessive condition interpretation of a exciter circuit to prevent starting failure of large synchronous motor. the large synchronous motor needs safety of it in accordance with operating frequent start and stop. the operating Problem point of synchronous motor appears potential element damage of Exciter circuit because synchronous motor is caused synchronous separation. hence we eliminate it and improve starting toque.

• Korean Journal of Microbiology
• /
• v.26 no.1
• /
• pp.27-31
• /
• 1988

Biosynthesis and processing of cytoplasmic mRNA from heterogenous nuclear RNA (hn-RNA) in Aspergillus phoenicis were studied by $^{3}H$-uridine labeling and synchronous culture techniques during their life cycle. Incorporations of $^{3}H$-uridine into hn-RNA and mRNA were most rapid in vesicle-phialide fromation stage and diminished in hyphal growth stage. The processing of cytoplasmic mRNA from hn-RNA was proceeded more rapidly in hyphal growth and conidiophore formation stages than in conidia and vesicle-phialide formation stages. The specific radioactivities of hn-RNA and mRNA were very high in vesicle-phialide formation stage.

• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.785-795
• /
• 2022

Traditional germplasms are unsuitable for mechanized production, limiting adzuki bean production. The creation of cultivars that can be harvested by mechanized means is an urgent task for breeders. The bottom pod height (BPH), lodging resistance, and synchronous maturing of adzuki beans are critical factors for the reduction of losses due to mechanized harvesting. In this study, 14 traits of 806 adzuki bean accessions were analyzed. All growth stages and the yield, lodging score, and synchronous maturing correlated negatively with the BPH. These negative correlations reflect the increased difficulty of breeding to simultaneously satisfy the needs for no lodging, high synchronous maturing rates, BPHs > 10 cm, and high yield. We screened three germplasms with no lodging, high synchronous maturing rates, and BPHs > 10 cm that were used as mechanization-adapted breeding material for crossing with high-yield cultivars. Agronomic trait diversity in adzuki beans was also examined in this study. Principal component and cluster analyses were conducted for 806 germplasms resulting in three clusters with the yield and three growth stage traits serving as the main discriminating factors. Cluster 1 included high-yield germplasms with the number of pods per plant and the number of seeds per pod being the major discriminant factors. Cluster 2 included germplasms with long growth periods and large 100-seed weights while cluster 3 contained germplasms with high BPHs. In general, the characteristics that make mechanical harvesting feasible and those assessed in this study could be utilized to choose and enhance adzuki beans production.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.2
• /
• pp.126-129
• /
• 1991

In order to produce ${\gamma}-linolenic$ acid by Mucor sp. KCTC 8405P. the fungus was cultivated in fed-batch culture with two phases. i.e., growth in yeast-like form and induction to hyphal growth by pH shift of the culture medium during cultivation. The synchronous growth of the fungus into the appropriate sizes was important for the high density cell culture of this dimorphic fungus. Dissolved oxygen concentration in the medium did not affect degree of unsaturation of fatty acids and ${\gamma}-linolenic$ acid content. Under the culture conditions applied in this experiment. the fungus was found to produce 100 g/l dry mycelia containing 40% of the lipids, where ${\gamma}-linolenic$ acid comprised about 9% of the total extractable fatty acids.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.5
• /
• pp.13-18
• /
• 2009

In this paper, it is intended to figure out the features and causes of the processes of creation, growth and disappearance of spiral-vortex-flow generated in Francis turbines generally. The spiral-vortex-flow generated in draft tubes of the Francis turbines is estimated to have negative effects on power plant structure and to the people inside the building as well as to lead to a low-frequency-vibration driven by sub-synchronous whirl vibration. Therefore, we intend to investigate how much the low-frequency-vibration has an influence upon the powerhouse structure and practice analyzing the effectiveness on the previously-introduced methods to reduce side-effects of sub-synchronous whirl vibration and finally we intend to show the optimal solutions through this paper.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.6
• /
• pp.360-365
• /
• 2012

The simultaneous surgical correction of bilateral cleft lip and nasal deformity has become a more common surgical technique that has greatly changed conventional strategies for secondary nasal correction. Mulliken has been known as one of the earliest proponents for the synchronous repair of bilateral cleft lip and nasal deformity, and he emphasized the responsibility of the treating surgeon to evaluate nasolabial growth by comparing anthropometric measurements with age-matched normal patients. Good outcomes from this surgical method have been reported in clinical cases worldwide. Herein, we describe the management of two cases of bilateral cleft repair, following the principles and methods established by Mulliken. We also provide a relevant review of the literature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.217-226
• /
• 2007

By growth of digital media devices, a number of researches are in progress for transmission of isochronous traffic over network. Above all, network techniques that apply Ethernet, are in the limelight because of advantages of Ethernet. A standardization of network technique for isochronous traffic over Ethernet is in progress in IEEE 802.1 AVB TG. This paper proposed network technique for isochronous traffic over Ethernet model, that is, synchronous Ethernet model with synchronization method between devices. And this paper proposed bandwidth reservation method for transmission of isochronous traffic in synchronized devices. In this paper, synchronous Ethernet model is implemented through OPNET, efficiency of proposed methods is analyzed.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.149-155
• /
• 2019

In this study, the multiplicity of synchronous online class discussion activity is explored at conceptual level. From the cultural-historical activity theory (CHAT), each utterance may be considered as a product of the activity system. Alderfer's ERG theory is employed as another theoretical framework for the study. Based on the subject's existence, relationship, growth needs, their class discussion activities constitute four different dimensions: physical/biological, cultural/institutional, social/relational, and cooperative knowledge construction. It is inherent in individual activities and has a different arrangement according to their interests and situations, and at the same time acts as a factor of cooperation and competition among the participants. Through this, collective discussion activities represent complex and dynamic development patterns.

• Korean Journal of Microbiology
• /
• v.19 no.1
• /
• pp.8-13
• /
• 1981

The content of sulfhydryl compounds in Chlorella cells during the life cycle in the synchronous culture is determined spectrophotomatically at 250nm(pH7.0) using p-CMB as SH-reagent. The changes in the content of-SHl compounds and protein in Chlorella cells is measured during the life cycle in connection with cell division and analyzed. 1) The amounts of total ninhydrin reactive substance increased with growth of cells but increased the more at the $L_4$ stage(cytokinesis stage) than at the $L_2$ stage (nuclear division stage). 2) The sulfhydryl content of Chlorella cells increased strikingly at the $L_2$ stage and decreased markedly at the $L_4$ stage. 3) The amounts of values -SH/protein showed a peak at the $L_2$ stage. The increase of the amount of total-SH compounds of cells during the nuclear division period was considered to be caused by the weighty roles of protein-SH groups for the formation of nuclear division apparatus and for the enzyme activity.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.77-86
• /
• 2019

The present study focuses on the effect of staggered integration factor (SIF) on Morton effect simulation results. The Morton effect is a synchronous rotordynamic instability problem caused by the temperature differential across the journal in fluid film bearings. Convection and conduction of heat in the thin film displaces the hot spot, which is the hottest circumferential position in the thin film, from -20 to 40 degrees ahead of the high spot, where the minimum film clearance is experienced. The temperature differential across the journal causes a bending moment and the corresponding thermal bow in the rotating frame acts like a distributed synchronous excitation in the fixed frame. This thermal bow may cause increased vibrations and continued growth of the synchronous orbit into a limit cycle. The SIF is developed assuming that the response of the rotor-lubricant-bearing dynamic system is much quicker than that of the bearing-journal thermal system, and it is defined as the ratio between the simulation time of the thermal system and the rotor-spinning period. The use of the SIF is unavoidable for efficient computing. The value of the SIF is chosen empirically by the software users as a value between 100 and 400. However, the effect of the SIF on Morton effect simulation results has not been investigated. This research produces simulation results with different values of SIF.