• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.273-281
• /
• 2003

This paper proposes a new time synchronization scheme for the Automatic Identification System(AIS). The proposed scheme utilizes a Temperature Compensated Crystal Oscillator(TCXO) as a local reference clock, and consists of a Digitally Controlled Oscillator(DCO), a divider, a phase comparator, and register blocks. Primary time reference is IPPS from GPS receiver that is synchronized to Universal Time Coordinated(UTC). And if GPS is unavailable, other station's signal is utilized as secondary time reference. The phase comparator measures time difference between the 1PPS and the generated transmit clock. The measured time difference is compensated by controlling the DCO and the transmit clock is synchronized to the Universal Time Coordinated(UTC). The synchronized transmit clock(9600Hz) is divided into the transmitting time slot(37.5Hz). The proposed scheme is tested in an experimental AIS transponder set. The experimental result shows that the proposed module satisfies the timing specification of the AIS technical standard, ITU-R M.1371-1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.787-795
• /
• 1994

In this paper, we have proposed a bit synchronization algorithm which extracts the synchronized clock for random NRZ signal and designed a circuit followed by its performance analysis. The synchronization circuit consists of the Data Transition Detector and Mod 64 Counter, Phase Comparison and Controller, 64 Divider. The data input rate and master clock rate are 16 Kbps and 4.096MHz, respectively. The phase is compensated by 1/64 of the data signal period for every data bit. Through a series of experiments, the maximum immunity of phase jiter for input signal and the deviation of the recovered clock are measured 23.8% and 1.6%, respectively. The fully digital synchronization circuit is simple to implement into signal IC chip and also effective for the low speed digital mobile communications.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.191-196
• /
• 2005

A low-cost, high-performance 40 Gb/s clock recovery module using a phase-locked loop(PLL) for a 40 Gb/s optical receiver has been designed and implemented. It consists of a clock recovery circuit, a RF mixer and frequency discriminator for phase/frequency detection, a DR-VCO, a phase shifter, and a hold circuit. The recovered 40 GHz clock is synchronized with a stable 10 GHz DR-VCO. The clock stability and jitter characteristics of the implemented PLL-based clock recovery module has shown to significantly improve the performance of the conventional open-loop type clock recovery module with DR filter. The measured peak-to-peak RMS jitter is about 230 fs. When input signal is dropped, the 40 GHz clock is generated continuously by hold circuit. The implemented clock recovery module can be used as a low-cost and high-performance receiver module for 40 Gb/s commercial optical network.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.885-909
• /
• 2016

Advances in low-cost wireless sensing have made instrumentation of large civil infrastructure systems with dense arrays of wireless sensors possible. A critical issue with regard to effective use of the information harvested from these sensors is synchronized sensing. Although a number of synchronization methods have been developed, most provide only clock synchronization. Synchronized sensing requires not only clock synchronization among wireless nodes, but also synchronization of the data. Existing synchronization protocols are generally limited to networks of modest size in which all sensor nodes are within a limited distance from a central base station. The scale of civil infrastructure is often too large to be covered by a single wireless sensor network. Multiple independent networks have been installed, and post-facto synchronization schemes have been developed and applied with some success. In this paper, we present a new approach to achieving synchronized sensing among multiple networks using the Pulse-Per-Second signals from low-cost GPS receivers. The method is implemented and verified on the Imote2 sensor platform using TinyOS to achieve $50{\mu}s$ synchronization accuracy of the measured data for multiple networks. These results demonstrate that the proposed approach is highly-scalable, realizing precise synchronized sensing that is necessary for effective structural health monitoring.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.577-582
• /
• 2016

The synchronous TDC(Time-to-Digital Converter) of counter-type using current-conveyor is designed by $0.18{\mu}m$ CMOS process and the supply voltage is 3 volts. In order to compensate the disadvantage of a asynchronous TDC the clock is generated when the start signal is applied and the clock is synchronized with the start signal. In the asynchronous TDC the error range of digital output is from $-T_{CK}$ to $T_{CK}$. But the error range of digital output is from 0 to $T_{CK}$ in the synchronous TDC. The error range of output is reduced by the synchronization between the start signal and the clock when the timing-interval signal is converted to digital value. Also the structure of the synchronous TDC is simple because there is no the high frequency external clock. The operation of designed TDC is confirmed by the HSPICE simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.171-177
• /
• 2006

A low-cost, high-performance 40 Gb/s clock recovery module using a phase-locked loop(PLL) for a 40 Gb/s optical receiver with the clock-hold function has been designed and implemented. It consists of a clock extractor circuit, an RF mixer and a frequency discriminator for phase/frequency detection, a VC-DRO, a phase shifter, and a clock-hold circuit. The extracted 40 GHz clock is synchronized with a stable 10 GHz VC-DRO. The clock stability and jitter characteristics of the implemented PLL-based clock recovery module are significantly improved as compared with those of the conventional open-loop type clock recovery module with a DR filter. The measured peak-to-peak RMS jitter is about 230 fs. When an input signal is dropped, the 40 GHz clock is maintained continuously by the hold circuit.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.468-470
• /
• 2002

We have designed X-ray detection system and multi-channel data acquisition system for Spiral CT application. X-ray detection system consists of scintillator and photodiode. Scintillator converts X-ray into visible light. Photodiode converts visible light into electrical signal. The multi-channel data acquisition system consists of analog, digital, master and backplane board. Analog board detects electrical signal and amplifies signal by 140dB. Digital board consists of MUX(Multiplex) which routes multi-channel analog signal to preamplifier, and ADC(Analog to Digital Converter) which converts analog signal into digital signal. Master board supplies the synchronized clock and transmits the digital data to image reconstructor. Backplane provides electrical power, analog output and clock signal. The system converts the projected X-ray signal over the detector array with large gain, samples the data in each channel sequentially, and the sampled data are transmitted to host computer in a given time frame. To meet the timing limitation, this system is very flexible since it is implemented by FPGA(Field Programmable Gate Array). This system must have a high-speed operation with low noise and high SNR(signal to noise ratio), wide dynamic range to get a high resolution image.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.684_685
• /
• 2009

A digital sampling algorithm that uses a two high resolution integrating Voltmeters which are synchronized by Phase Lock Loop (PLL) time clock for accurately measuring the parameters, active and reactive power, for sinusoidal power measurements is presented. The PLL technique provides high precision measurements, root mean square (rms), phase and complex voltage ratio, of the AC signal. The system has been designed to be used at the Korean Research Institute of Standards and Science (KRISS) as a reference power standard for electrical power calibrations. The test results have shown that the accuracy of the measurements is better than $10 {\mu}W/VA$ and the level of uncertainty is valid for the power factor range zero to 1 for both lead and lag conditions. The system is fully automated and allows power measurements and calibration of high precision wattmeters and power calibrators at the main power frequencies 50 and 60 Hz.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.166-170
• /
• 2000

A wavelength tunable all-optical clock recovery using a semiconductor optical amplifier in a fiber ring cavity is proposed and demonstrated at the wavelength of 1530 nm to 1570 nm. A synchronized optical pulse train is recovered from 10 Gbps and 30 Gbps randomly generated optical pulse streams with injection locking technique. Also, the system responses to the perturbation and the input average power variation are analyzed by a large-signal model based on time-domain travelling wave equation. ation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.88-94
• /
• 2005

This paper presents the design and implementation of a receiver operating between a rotary machine encoder and DSP. The receiver connects with the encoder using 1 bit serial data and DSP using 16 bits bus line. The receiver and encoder use the different operating frequency each other. We suggest a new apparatus and method of synchronized code for header detection in 1bit serial communication. The system operating frequency can be changed into 20MHz or 60MHz by using the external port such as 'clk_select'.