• Title/Summary/Keyword: symmetric ring

Search Result 116, Processing Time 0.02 seconds

Instability of High-Speed Impinging Jets(II) (고속 충돌제트의 불안정 특성)

  • Gwon, Yeong-Pil;Im, Jeong-Bin
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.22 no.4
    • /
    • pp.450-467
    • /
    • 1998
  • The characteristics of the unstable impinging circular jet is investigated based on the frequency characteristics and the sound field of the impinging-tones. Two symmetric modes S1 and S2, associated with low frequency and high frequency respectively, and one helical mode H have been observed. At low speed the S2 mode is dominant and switched by the S1 mode as the speed increases. When the jet speed is high the S1 mode is very active over the impinging distance from half the nozzle diameter to its ten times, while the S2 mode occurs at shorter distance corresponding to stage 2 and 3. The helical mode H seems unstable, likely to be influenced much by the experimental environment, and occurs at relatively high speed with almost the same frequency characteristics as the S2 mode. By estimating the convection speed of the unstable jet, it is found that the ratio of the convection speed to the jet speed decreases with both Strouhal number and Reynolds number and the speed of S2 mode is faster than the Si mode. When the present experimental results are compared with the previous investigations performed for the hole tone and the impinging tone with a small plate, the S1 mode is found to be associated with the ring vortex of large diameter with low speed, but the S2 mode with the vortex of small diameter with high speed. In addition, the frequency is found to be influenced by the nozzle configuration but the characteristics is almost the same. From the impinging distance and frequency range, it can be deduced that S1 mode is related with the jet column mode and S2 mode with the shear mode.

Discovery of Maritrema jebuensis n. sp. (Digenea: Microphallidae) from the Asian Shore Crab, Hemigrapsus sanguine us, in Korea

  • Chung, Ok-Sik;Lee, Hye-Jung;Sohn, Woon-Mok;Lee, Seung-Ha;Park, II-Yong;Oh, Sang-Ah;Chai, Jong-Yil;Seo, Min
    • Parasites, Hosts and Diseases
    • /
    • v.48 no.4
    • /
    • pp.335-338
    • /
    • 2010
  • Maritrema spp. (Digenea: Microphallidae) are parasites of birds, but have not been found in the Republic of Korea. In this study, metacercariae of Maritrema sp. were discovered in the Asian shore crab, Hemigrapsus sanguineus, caught in the mud-flats of Jebu-do, Hwasung-gun, Gyeonggi-do, and the adult flukes were confirmed by experimental infection into mice. Based on the symmetric ribbon-like vitellarium, adult flukes of Maritrema sp. were identified, but did not belong to previously described species in terms of the following morphologic characteristics: ceca reaching to the lateral wall at the anterior border of the ovary; ventral sucker larger than oral sucker; a prominent metraterm; and vitellarium forming a complete ring. Hence, we named this microphallid M. jebuensis n. sp. after the island where the second intermediate hosts were collected. From this study, it has been shown that Maritrema sp. is distributed in Korea and transmitted by the Asian shore crab, H. sanguineus.

Development and Application of a Landfill Gas Migration Model (폐기물 매립지에서의 가스 거동에 관한 모델 개발과 적용)

  • Park, Yu-Chul;Lee, Kang-Kun;Park, Chul-Hwi;Kim, Yong-Woo
    • Economic and Environmental Geology
    • /
    • v.29 no.3
    • /
    • pp.325-333
    • /
    • 1996
  • numerical model is developed to estimate gas flow in the landfill site. Darcy's law, the mass conservation law, and the ideal gas state equation are combined to compose the governing equation for the steady-state and transient-state gas flows. The finite element method (FEM) is used as the numerical solution scheme. Two-dimensional radial symmetric triangular ring element is used to discretize the simulation domain. The steady state model developed in this study is compared with AIRFLOW that is a commercial model developed by Hydrologic Inc. Mass balance test is performed on the transient gas flow simulation. The developed model is applied to analyze the gas extraction experiment performed by Daewoo Institute of Construction Technology at the Nanjido landfill in 1993. The developed model was registered at Korea Computer Program Protection Foundation.

  • PDF

Synthesis of [18F]-Labelled Nebivolol as a β1-Adrenergic Receptor Antagonist for PET Imaging Agent (베타1-아드레날린 수용체를 표적으로 하는 심근영상제로서 18F 표지된 nebivolol의 합성)

  • Kim, Taek-Soo;Park, Jeong Hoon;Lee, Jun Young;Yang, Seung Dae;Chang, Dong-Jo
    • Journal of Radiation Industry
    • /
    • v.10 no.4
    • /
    • pp.181-187
    • /
    • 2016
  • Selective ${\beta}_1$-agonist and antagonists are used for the treatment of cardiac diseases including congestive heart failure, angina pectoris and arrhythmia. Selective ${\beta}_1$-antagonists including nebivolol have high binding affinity on ${\beta}_1$-adrenergic receptor, not ${\beta}_2$-receptor mainly expressed in smooth muscle. Nebivolol is one of most selective ${\beta}_1$-blockers in clinically used ${\beta}_1$-blockers including atenolol and bisoprolol. We tried to develop clinically useful cardiac PET tracers using a selective ${\beta}_1$-blocker. Nebivolol is $C_2$-symmetric and has two chromane moiety with a secondary amino alcohol and aromatic fluorine. We adopted the general synthetic strategy using epoxide ring opening reaction. Unlike formal synthesis of nebivolol, we prepared two chromane building blocks with fluorine and iodine which was transformed to diaryliodonium salt for labelling of $^{18}F$. Two epoxide building blocks were readily prepared from commercially available chromene carboxylic acids (1, 8). Then, the amino alcohol building block (15) was prepared by ammonolysis of epoxide (14) followed by coupling reaction with the other building block, epoxide (7). Diaryliodonium salt, a precursor for $^{18}F$-aromatic substitution, was synthesized in moderate yield which was readily subjected to $^{18}F$-aromatic substitution to give $^{18}F$-labelled nebivolol.

The Historical Survey on Knitted Works - On the Basic of the Traditional Knitting Patterns of Europe - (편물의 역사적 고찰 -유럽의 편물 전통문양을 중심으로 -)

  • 이순홍;이선명
    • Journal of the Korean Society of Costume
    • /
    • v.50 no.7
    • /
    • pp.195-218
    • /
    • 2000
  • This study investigates the characteristics of European knitted works from a historical perspective. Specifically, this study deals with the following research topics: 1) the origin and development of knitting. 2) the characteristics of knitting industry according to the change of times, 3) the comparison of local knitting patterns and cultures. 4) 7he symbolic meaning of the designs in the knitted works and theire functions. This research is barred on the survey of the relevant literature and photographs. The results of the study are summarized as follows. 1) The introduction of knitted works was closely connected with the climatic and socio-economic conditions of the places of the origin. Knitted work developed mostly in Northern Europe, a cold area, and the barren, mountainous coastal areas where people frequently used woolen materials for clothes. 2) In ancient times, abstract and geometric patterns have developed in Europe under the influence of Arabian knitted work. Middle Ages saw the flourishing of Arabian knitted works representing the authority of the church. In early modern times, the knitted work assumed the wealth of the royal families and the nobles. But afterward it was gradually Popularized among the middle classes. Knitting was then regarded as one of the women's major cultural activities. However, recently in the interwar periods. the knitting industry did not flourish and the knitted works came to serve merely as comfort goods by political urge. Knitted works were introduced in Korea around 1870 (the 7th or 8th year of king Kojong era) by Catholic missionaries and they started to be made by machine in 1917. 3) As for the propagation of the knitted work into Europe, there are three routes estimated. The traditional knitting patterns of local areas and their characteristics are summed up as follows : (1) England Guernseys are thick dark blue wool, whereas Jerseys are thinner and of various colors. The knitted shawls of Shetland are world-famous for their fine, lace-like texture that they can be through a wedding-ring. The knitted work of Fair Isle shows several distinctive features, such as the use of no more than two colors, patterns with diagonal lines. symmetry within the patterns, the prominent OXO patterns, and horizontal bands of patterning. The representative knitted work of Aran is Aran sweater made for fishermen to developed from guernseys of Scotland. (2) Scandinavian countries are distinguished from other countries by their conservative but creative cultural tradition. Their knitting patterns are characterized by small geometric figures such as dots, triangles, squares, rhombuses, and crosses used often with stars and roses. Scandinavian knitting is also salient for its vertical stripes and simple motifs repeating at short intervals. (3) Baltic area : The Latvian and Lithuania stockings have very ornate patterns. Many of the Estonian knit stockings and mittens share designs. Komi was well-known for its symmetric diamond pattern. Komi patterns include colored stripes, borders of pattern and all-over designs of complex diagonals. (4) Balkan area : In Yugoslavia, the patterns of roses, leaves and flowers were used for stockings, gloves and leggings. Greek knitting resembled southern Russian knitting, which utilized light colored patterns with dark colors for a background. Turkish patterns are symmetric vertically or horizontally. 4) The traditional knitting patterns net only carried symbolic meanings but also served as means of communication. First of all, patterns had incantatory meanings. Patterns also represented Power or authenticity Patterns were symbolic of one's social standing, too. The colors, motifs and their arrangements were very important features symbolizing one's social position or family line. People often communicated by certain pieces of knitted work or patterns.

  • PDF

Crystallographic Studies of $Ag^+$-and $Ca^{2+}$- Exchanged Zeolite A Reacting with Rubidium Vapor (루비듐 증기와 반응한 $Ag^+$ 이온과 $Ca^{2+}$ 이온으로 치환된 제올라이트 A의 결정학적 연구)

  • Han, Young-Wook;Song, Seong-Hwan;Kim, Yang
    • Journal of the Mineralogical Society of Korea
    • /
    • v.4 no.1
    • /
    • pp.22-31
    • /
    • 1991
  • Three crystal structures of dehydrated $Ag^+$-and $Ca^{2+}$- exchanged zeolite $A(Ag_4Ca_4-A,\;Ag_^Ca_3-A,\;and\;Ag_8Ca_2-A)$ treated at 250${\circ}C$ with 0.1 Torr of Rb vapor have been determined by single-crystal x-ray diffraction techniques in the cubic space group Pm3m at 21(1)${\circ}C$ (a=12,271(1)${\AA}$, 12.255(1)${\AA}$, and 12.339(1)${\AA}$, respectively). Their structures were refined to the final error indices. R(weighted) of 0.072 with 130 reflections, 0.050 with 110 reflections, and 0.083 with 86 reflections, respectively, for which $I>3{\rho}(I)$. In each structure, Rb species are found at three different crystallographic sites:3$Rb^+$+ions per unit cell are located at 8-ring centers, ca. 5.6 to 6.4 $Rb^+$ ions are found opposite 6-rings on threefold axes in the large cavity, and ca. 2.5 to 3.0 $Rb^+$ ions are found on threefold axes in the sodalite unit. Also, Ag species are found at two different crystallographic stites: ca. 0.7 to 2.1 $Ag^+$ lie opposite 4-rings and ca. 2.2 to 4.8 Ag atoms are located near the center of the large cavity. In these structures, the numbers of Ag atoms per unit cell are 2.2, 2.4, and 4.8, respectively, and these may form hexasilver clusters at the centers of the large cavities. The $Rb^+$ ions, by blocking 8-rings, may have prevented silver from migrating out of the structure. Each hexasilver cluster is stabilized by coordination to up to 13 $Rb^+$ions. An excess absorption of about 0.8 Rb atom per unit cell indicates that the presence of a triangular symmetric $(Rb_3)2^{+}$ cation in sodalite cavity. At least one large-cavity six-ring $Rb^+$ ion must necessarily approach this cluster and may be viewed as a member of it to give $(Rb)_4^{3+}$, $(Rb)_5^{4+}$ or $(Rb)_6^{5+}$.

  • PDF