• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.69-74
• /
• 2006

In this paper, we present symbol detection methods for decision feedback equalizers (DFE) in trellis coded modulation systems. The proposed symbol detectors improve symbol error rate (SER) by exploiting the coding structure of trellis coded modulation (TCM). For example, for 8-PAM signals the achieved SER with the proposed detection scheme is improved to $2{\times}10^{-5}$ from $2.5{\times}10^{-2}$ of the conventional symbol-by-symbol detector under AWGN channel at 20dB SNR. This SER improvements mitigate error propagation of DFE.and produces significant over-all SER improvement for under multipath channels (for example, from 0.26 to 0.01 and 0.005 under a severe multipath channel 20dB SNR as shown in the simulation result of this paper).

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

This paper presents and compares several techniques that detect the symbol rate of unknown received signal. Symbol rate is detected from the power spectral density of the circuits such as the delay and multiplier circuit, the square law circuit, and analytic signal, etc. As a result of discrete Fourier transform of the output signals of these circuits, a lot of spectral lines and some peaks appear in frequency domain and the position of first peak is corresponding to the symbol rate. If a spectral line on the frequency that is not located in symbol rate is larger than the first peak, the symbol rate is erroneously detected. Thus, the ratio between the value of first peak and the highest side spectral line is used for the measure of the performance of symbol rate detector. For the MPSK modulation, the analytic signal method shows better performance than the delay and multiplier and square law circuits when the received signal power is lager than -20dB. It is also noted that the delay and multiplier circuit is not able to detect the symbol rate for the QAM modulation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.54-62
• /
• 1993

In this paper, performance comparisions of MTCM systems with 8DPSK over mobile communication channels are obtained by computer simulation. The multiple symbol differential detection scheme is introduced in order to improve the bit error rate performance in the detection of the trellis-coded 8DPSK system. Rician fading channels are used as test channels. The simula- tion results show that the trellis-coded 8DPSK system with multiple symbol detection gives better performance than that of the uncoded DQPSK system. And symbol by symbol interleaving method gives better performance than the symbol pair interleaving method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.176-186
• /
• 2006

In this paper, we propose an enhanced symbol detector algorithm for 2.45GHz LR-WPAN(Low-Rate Wireless Personal Area Network) receiver. Because the frequency offset of $\pm$80ppm on 2.45GHz band is recommended in IEEE 802.15.4 LR-WPAN(Low-Rate Wireless Personal Area Network) specification, a symbol detector algorithm having stable operation in the channel environment with large frequency offset is required. For robustness to the frequency offset, non-coherent detection-based symbol detector algorithm is typically applied in the LR-WPAN receiver modem. However, the noncoherent symbol detector has increased performance degradation and hardware complexity due to squaring loss of I/Q squaring operation. Therefore we propose a coherent detection-based symbol detector algorithm with frequency offset compensation using a preamble symbol. The proposed algorithm is more suitable for LR-WPAN receiver aimed at low-cost, low-power and low-complexity than the non-coherent symbol detector, since it can reduce performance degradation due to squaring loss of I/Q squaring operation and implementation complexity. Simulation results show that the proposed algorithm has performance improvement of about 1dB in various channel environments.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2059-2062
• /
• 2002

For detection of digitally modulated signals, the receiver must be provide with accurate carrier phase and symbol timing estimates. So far, tots of algorithms have been suggested for those purposes. In general, a interpolation filter with TED(Timing Error Detection) like Gardner algorithm is popularly used for symbol timing estimate of digital communication receiver. Apart from the performance point of view, a multiplicative operation of any interpolation filter limits the symbol rate of the system. Hence, we suggest a new symbol timing estimate algorithm for high speed burst-mode fixed wireless communication system and analyze its performance in the AWGN channel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.12-18
• /
• 2017

This paper presents a Dijkstra's-search-based sphere decoding (SD) algorithm with limited complexity for the symbol detection in MIMO communication systems. The Dijkstra search-based SD is efficient to achieve a near-optimal error rate in the MIMO symbol detection, but has a critical problem in that its complexity is variable and can correspond to that of the exhaustive search in the worst case. The proposed algorithm limits the computations while achieving a near-optimal error rate. Simulation results show that the error rate is near optimal even with the limited complexity.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.143-152
• /
• 2007

In this paper, we propose a time-varying modified minimum mean-squared error (MMSE) detector for the detection of higher data rate signals in a multirate asynchronous code-division multiple-access (CDMA) system which is signaled in a fast Rayleigh fading channel. The interference viewed by a higher data rate symbol will be periodic due to the presence of a lower data rate symbol which spans multiple higher data rate symbols. The detection is carried out on the basis of a modified MMSE criterion which incorporates differential detection and the ratio of channel coefficients in two consecutive observation intervals inherently compensating the fast variation of the channel due to fading. The numerical results obtained by the MMSE detector with time-varying detection show around 3 dB (M=2) and 6 dB (M=4) performance improvement at a BER of $10^{-3}$ in the AWGN channel, while introducing more computational complexity than the MMSE detector without time-varying detection. At a higher $E_b/N_0$, the proposed scheme can achieve a BER of approximately $10^{-3}$ in the presence of fast channel variation which is an improvement over other schemes.

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.517-524
• /
• 2015

The fast and accurate spectrum sensing over an ultra-wide bandwidth is a big challenge for the radio environment cognition. Considering sparse signal feature, two novel compressed sensing schemes are proposed, which can reduce compressed sampling rate in contrast to the traditional scheme. One algorithm is dynamically adjusting compression ratio based on modulation recognition and identification of symbol rate, which can reduce compression ratio. Furthermore, without priori information of the modulation and symbol rate, another improved algorithm is proposed with the application potential in practice, which does not need to reconstruct the signals. The improved algorithm is divided into two stages, which are the approaching stage and the monitoring stage. The overall sampling rate can be dramatically reduced without the performance deterioration of the spectrum detection compared to the conventional static compressed sampling rate algorithm. Numerous results show that the proposed compressed sensing technique can reduce sampling rate by 35%, with an acceptable detection probability over 0.9.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.268-278
• /
• 2017

In this paper, we propose two novel detection schemes with low-complexity based on the unified receiver architecture which minimizes a fundamental tradeoff at rate-energy region in SWIPT system. The proposed detection schemes are twofold: The two-stage detection scheme and Euclidean distance combination detection scheme. The two-stage detection scheme detects amplitude information of symbols from rectified signals for energy harvesting. In the sequel, it detects symbols based on phase information of baseband signals for information decoding. The Euclidean distance combination detection scheme detects symbols using linear positive-weighted sum of two metrics: Euclidean distance based on baseband signals for information decoding and Euclidean distance based on rectified signals for energy harvesting. For numerical results, we confirm that the proposed detection scheme can achieve better performance than the conventional scheme in terms of symbol error rate, symbol success rate-energy region and achievable rate-energy region.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.75-82
• /
• 2008

In this paper, we propose an efficient symbol detection algorithm for multiple-input multiple-output spatial multiplexing (MIMO-SM) systems and present its design and implementation results. By enhancing the performance of the first detected symbol which causes error propagation, the proposed algorithm achieves a considerable performance gain as compared to the conventional sorted QR decomposition (SQRD) based detection and the ordered successive detection (OSD) algorithms. The bit error rate (BER) performance of the proposed detection algorithm is evaluated by the simulation. In case of 16QAM MIMO-SM system with 4 transmit and 4 receive ($4{\times}4$) antennas, at $BER=10^{-3}$ the proposed algorithm obtains the gai improvement of about 2.5-13.5 dB over the conventional algorithms. The proposed detection algorithm was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.18um 1.8V CMOS standard cell library. The results show that the proposed algorithm can be implemented without increasing the hardware costs significantly.