• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.1954-1956
• /
• 1997

In this paper, a variable structure current control scheme for field-oriented induction motor drive is presented. The current controller based on space voltage vector PWM scheme consists of feedforward, decouple and variable structure control. The proposed current controller tracks reference value quickly, has robust property against parameter variation and disturbance, reduces switching frequency and improves performance of induction motor drive. Finally, the proposed current controller is verified by digital simulation

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.83-85
• /
• 2003

This paper presents a speed control of permanent magnet synchronous motors (PMSM) using an adaptive integral binary observer without speed and position sensors. In view of composition with a main loop regulator and an auxiliary loop regulator, the binary observer has a property of the chattering alleviation in the constant boundary layer. In order to improve the steady state performance of the binary observer, the proposed adaptive integral binary observer is formed by adding extra integral dynamics to the switching hyperplane equation. The effectiveness of the proposed system is conformed by the experimental results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.344-347
• /
• 2008

We fabricated the outer type-dynamic microlens array using a surface-stabilized ferroelectric liquid crystal, UV curable polymer and the stacked liquid crystalline polymer. The outer type-microlens array has a lower driving voltage and fast switching property. It is applicable to a variety of optical systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.555-558
• /
• 2003

The bistability in a chiral-splay nematic liquid crystal cell, which is obtained by adding a chiral additive to a splay cell, is proposed. In this paper, we describe a new horizontal way of switching between the two states of the bistable chiral-splay cell, one state being characterized by a non-twisted director field with splay, the second state showing a director-field with $180^{\circ}C$ twist.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.369-372
• /
• 2002

This paper presents a family of continuous conduction mode with constant-switching pulse width modulator controllers. Unified implementation of quasi steady state approach for various DC-DC converters topoiogies is illustrated. The property and control low for quasi-state approach will be discussed in this paper. The different procedures will be discussed in details with different results for five commonly used DC-DC converters. Both trailing and leading edge pulse width modulation are used. Leading edge modulation can some times lead to simpler control circuitry as will be demonstrated in some circuits. These controllers do not require the multiplier in the voltage feed back loop, error amplifier in the current loop and rectified line voltage sensor, which are needed by traditional control methods. Controller examples and design arc analyzed.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.193-207
• /
• 2012

New insights into our previously proposed hybrid-type method for vibration control are highlighted in terms of energy analysis, such as the assessment of energy efficiency and system stability. The hybrid method improves the bang-bang active method by combining it with an energy-recycling approach. Its simple configuration and low energy-consumption property are quite suitable especially for isolated structures whose energy sources are strictly limited. The harmful influence of the external voltage is assessed, as well as its beneficial performance. We show a new chattering prevention approach that both harvests electrical energy from piezoelectric actuators and eliminates the displacement-offset of the equilibrium point of structures. The amount of energy consumption of the hybrid system is assessed qualitatively and is compared with other control systems. Experiments and numerical simulations conducted on a 10-bay truss can provide a thorough energy-efficiency evaluation of the hybrid suppression system having our energy-harvesting system.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.1-8
• /
• 2003

In this study, the high performance BCD device structure which satisfies the high voltage and fast switching speed characteristics is devised. Through the process and device simulation, optimal process spec. & device spec. are designed. We adapt double buried layer structure, trench isolation process, n-/p-drift region formation and shallow junction technology to optimize an electrical property as mentioned above. This I.C consists of 20V level high voltage bipolar npn/pnp device, 60V level LDMOS device, a few Ampere level VDMOS, 20V level CMOS device and 5V level logic CMOS.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2014

Nowdays, fluorescent rhodamine chemosensors have attracted a worldwide interest due to its ability to selectively detect heavy and transition metal cations. Due to the importance in environmental and biological toxic effects, the developments of fluorescent chemosensors have been received considerable attention in recent. Especially, a rhodamine-based chemosensor probes have been proved to be useful by exhibiting the efficient "off-on" fluorescence switching toward selected metal cations. This fluorophore can undergo the transformation from non-fluorescent and colorless spirolactam derivative to fluorescent ring-open form. In this study, a new fluorescent chemosensor was synthesized using rhodamine B through two-step procedures, and its selectivity and related optical property were characterized. Selectivity and sensitivity was found toward $Cu^{2+}$ guest molecules and then related optical properties of rhodamine B based fluorescent chemosensor compound were characterized using discussed. In addition, computational calculation was used to determine the HOMO/LUMO values.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.450-452
• /
• 2005

The ion beam alignment technique is one of the potential and fascinating methods. However, there are merely a few reports about aligning nematic liquid crystals (NLCs) horizontally for in-plane switching mode (IPS) by means of low energy ion beam exposure on inorganic materials such as DLC. In this study, we have investigated the tilted vertical alignment of NLC by the ion beam technique on the thin films of various amorphous silicon compounds as new inorganic alignment materials. Appropriate pretilt angles of NLC with preferred orientation on these thin films were achieved. And the electro-optic property of vertically aligned single domain cells has been investigated.