• 전기의세계
• /
• v.28 no.12
• /
• pp.33-40
• /
• 1979

This mininzation of the multi-output switching function becomes a difficult task when the input varibles and the number of functions increase. This paper describes the optimal selection of prime inplicats for the multi-output switching function by using the Inter-section Table. This procedure is applicable to both manual and computhe programmed realization without complesith. The algorithm is implemented by a computer program in the standard FORTRAN iv language.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

This paper presents a new method for removing reaching phase in variable structure control systems using Bell type switching function. By proposed method, during the entire control process reaching phase is removed. For effective speed control of trapezoidal type brushless DC motor, a time varying switching function based speed controller is developed as illustration.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.525-534
• /
• 2017

A hardware-acceleration architecture that separates virtual network functions (VNFs) and network control (called HSN) is proposed to solve the mismatch between the simple flow steering requirements and strong packet processing abilities of software-defined networking (SDN) forwarding elements (FEs) in SDN/network function virtualization (NFV) architecture, while improving the efficiency of NFV infrastructure and the performance of network-intensive functions. HSN makes full use of FEs and accelerates VNFs through two mechanisms: (1) separation of traffic steering and packet processing in the FEs; (2) separation of SDN and NFV control in the FEs. Our HSN prototype, built on NetFPGA-10G, demonstrates that the processing performance can be greatly improved with only a small modification of the traditional SDN/NFV architecture.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.381-384
• /
• 1999

In this paper, we addressed the problem of reducing the switching activity in pipeline datapath and proposed a solution. clock-gating method is a kind of practical technique for reducing switching activity in finite state machine. But, in the case that the target gated function unit has a pipeline structure, there is some spurious switching activity on each stage register group. This occur in early stage of every function enable cycle. In this paper we proposed a method to solve this problem. This method generates the enable signal to each pipeline stage to gate the clock feeding register group. Experimental results showed effective reduction of dynamic powers in pipeline circuits.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.411-417
• /
• 1995

Packet switching is an important aspect of ISDN. In the TDX-10 switching system, which is being developed as an ISDN exchange in Korea, the packet switching function is implemented on the basis of Case B scenario of X.31. After implementing the packet switching function the performance test must be executed to check whether the design objectives of performance are satisfied or not. However, it is not easy to set up test environment for performance measurement under full load conditions. This paper presents the design of the traffic generator which enables us to do performance test of the TDX-10 packet handler under full load conditions. To generate packet traffic we change only software programs without any change of the hardware system of the packet handler.

• Communications for Statistical Applications and Methods
• /
• v.25 no.1
• /
• pp.29-42
• /
• 2018

We combine the integer-valued GARCH(1, 1) model with a generalized regime-switching model to propose a dynamic count time series model. Our model adopts Markov-chains with time-varying dependent transition probabilities to model dynamic count time series called the generalized regime-switching integer-valued GARCH(1, 1) (GRS-INGARCH(1, 1)) models. We derive a recursive formula of the conditional probability of the regime in the Markov-chain given the past information, in terms of transition probabilities of the Markov-chain and the Poisson parameters of the INGARCH(1, 1) process. In addition, we also study the forecasting of the Poisson parameter as well as the cumulative impulse response function of the model, which is a measure for the persistence of volatility. A Monte-Carlo simulation is conducted to see the performances of volatility forecasting and behaviors of cumulative impulse response coefficients as well as conditional maximum likelihood estimation; consequently, a real data application is given.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.121-124
• /
• 2003

The conventional CNC(Computerized Numerical Controller) of machine tool, which is dependent to CNC maker, was a closed architecture type. Therefore, it is impossible to implement a special user-define function to CNC. But recently, CNC is changed to OAC(Open Architecture Controller) type increasingly and the general function of CNC can be upgrade efficiently. This paper describes web service application for remote monitoring regarding the faults or machine tool with open architecture CNC. The major faults of CNC machine tool can be defined to the operational faults to be charged over 70%. Those faults are unpredictable because of being occurred without any warning. To generalize the fault diagnosis efficiently. two diagnosis models such as SF(Switching Function) and SSF(Step Switching Function) are proposed and the function of fault diagnosis is implemented to internal function of OAC. Also, to service remotely the faults of CNC machine tool. the suitable web environment is proposed and practical function is programmed to evaluate its operation on web.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1346-1349
• /
• 2004

In this paper, we have proposed the new link-weight calculating function using for routing decision in WDM networks. The proposed link-weight calculating functions includes following factors those are available wavelengths per link, distance loss, total wavelengths, and limited wavelength conversion. The calculated link-weight is applied into the algorithm of routing decision in order to determine the available lightpath that qualifies user requests. The objective is to improve the performance of wavelengths assignment with fast determining the suitable lightpath by using the proposed link-weights calculating function. The analytical model of WDM switching networks is introduced for numerical analysis. The link-weight calculating function is performed. Finally, the performance of proposed algorithm is displayed with numerical results in term of the blocking probability, the probability that connection requests from users are rejected due to there are no available lightpath to be assigned for them. It is also shown that the blocking probability is varied in depending on the number of available wavelengths and the degree of wavelength conversion. The numerical results also show that the proposed link-weight calculating function is more cost-effective choice for the routing decision in WDM switching networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3701-3727
• /
• 2016

Recently Service Function Chaining (SFC) is promising to innovate the network service mode in modern networks. However, a feasible implementation of SFC is still difficult due to the need to achieve functional equivalence with traditional modes without sacrificing performance or increasing network complexity. In this paper, we present a configurable network service chaining (CNSC) mechanism to provide services for network traffics in a flexible and optimal way. Firstly, we formulate the problem of network service chaining and design an effective service chain construction framework based on integrating software-defined networking (SDN) with network functions virtualization (NFV). Then, we model the service path computation problem as an integer liner optimization problem and propose an algorithm named SPCM to cooperatively combine service function instances with a network utility maximum policy. In the procedure of SPCM, we achieve the service node mapping by defining a service capacity matrix for substrate nodes, and work out the optimal link mapping policies with segment routing. Finally, the simulation results indicate that the average request acceptance ratio and resources utilization ratio can reach above 85% and 75% by our SPCM algorithm, respectively. Upon the prototype system, it is demonstrated that CNSC outperforms other approaches and can provide flexible and scalable network services.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.249-255
• /
• 2010

The paper proposes a new type of robust speed control strategy for permanent magnet synchronous motor by using PD-sliding mode hybrid control. The PD control has a good performance in the transient region while the sliding mode controller provides the robustness against system uncertainties. Taking advantages of the two control strategies, the proposed control method utilizes the PD control in the approaching region to the sliding surface and the sliding mode control near at the sliding surfaces. The chattering problem of the sliding mode controller is eliminated by applying the saturation function for the switching function of the sliding mode control. The stability of the sliding mode control is verified by using Lyapunov function with the proper selection of variable gains. It is shown that with this simple switching algorithm, stability of the overall hybrid control system is ensured. Through the simulations, the PD-sliding mode algorithm is shown to have a good performance in the transient response as well as being robust against disturbances. The robustness of the PD-sliding mode algorithm is further demonstrated against various external disturbances in the real experiments of SPMSM motor control.