• 전력전자학회논문지
• /
• 제2권3호
• /
• pp.20-25
• /
• 1997

SRM은 많은 장점으로 인해 각종 산업분야에 적용을 검토하고 있다. 그러나 토오크리플과 소음이 교류전동기보다 상대적으로 높은 단점이 있다. SRM은 상전류파형이 동작특성과 토오크리플발생에 큰 영향을 미친다. 본 논문에서는 토오크리플을 줄이고 정밀한 속도제어를 위해 순시도통각제어와 PLK제어시스템을 이용하였다. PLL의 위상검출기는 도통각제어에, 루우프필터의 출력은 순시 인가전압의 제어에 각각 도입하여 속응성을 높이고 토오크리플을 줄일 수 있도록 하였다. 실험을 통하여 정밀한 속도제어와 토오크리플 저감특성을 확인할 수 있었다.

• 전력전자학회논문지
• /
• 제3권1호
• /
• pp.46-52
• /
• 1998

본 논문은 스위치드 릴럭턴스 전동기의 자기포화 비선형 상태를 고려하여 일정 토오크 발생을 위한 전류형태 구현에 관한 방법을 기술한다. 본 연구에서는 인덕턴스 증가영역에서의 전류 검출방법 및 비선형 인덕턴스 프로파일 모델링을 위한 근사화 기법이 채택되었다. 그리고 제안된 시스템에서 부하조건에 관계없이 일정토오크 발생을 위한 전류파형을 생성하기 위하여 단일스위칭 각도 제어 및 전압제어 방법이 사용되었다. 마지막으로 3HP 6/4 스위치드 릴럭턴스 전동기를 사용하여 본 연구의 타당성을 실험적으로 입증하였다.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.54-59
• /
• 1996

As the current shape of SRM is of pulse type and changed by the motor parameters and drive conditions, the influences on the drive efficiency by control method are more than other types of motors. In this paper, a proper excitation condition to drive a SRM with high efficiency is proposed and tested. It is derived from the conditions that the phase current of a SRM is to be flat-topped at various drive. The saturation effect of magnetic circuit is accounted for more accurate analysis. Experimental tests are executed to verify the proposed excitation method. This drive system is easy to commutate and also advantageous in reducing torque ripple. (author). 6 refs., 10 figs., 1 tab.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권11호
• /
• pp.575-582
• /
• 2001

This paper presents a calculating method of switching angle for adaptive switched reluctance motor (SRM) drive of a drill. The operation of the SRM is completely characterized by the flux linked by one phase winding which depends only on the current in that same phase winding and the rotor position. An efficiently adaptive SRM drive is possible on appropriately scheduling the commutation angles with accurate rotor position, supplied current value and speed information. An adaptive SRM drive with reduction torque ripple should be controlled by an optimized phase current control along with rotor position. Therefore, we are suggested a computing method of switching turn-on and off angles for adaptationally SRM operation with varied rotor speed and load. To probe the computing method, we have some simulation and experiment, it is shown a good result that can be computing the optimized switching angles for an electric drill motor.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.33-42
• /
• 2001

In switched reluctance motor(SRM) deives, the turn-on and turn-off angles of each phase switch should be accurately controlled for accuracy and efficiency. The accuracy of the switching angles is mainly dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to implement a control algorithm of the SRM, respectively. Thus, the higher the speed of the SRM is increased, the larger the amount of the switching angle deviations are from preset turn-on and turn-off angles. Consequently, the motor can not be driven stably high speed region. There fore, a simples and low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using a simple digital logic circuit is also presented for a wide speed range operation.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.30-35
• /
• 2004

스위치드 릴럭턴스 전동기(SRM)의 구동에서 회전자 위치는 필수적인 정보로서 회전자의 위치에 따라 고정자의 상여자 신호를 동기화 시키는 것이 매우 중요하다. 이를 위해 고해상도의 엔코더나 레졸버가 이용되는데 이는 전동기의 생산가격 상승을 가져오게 된다. 반면 센서리스 기법을 통한 상여자신호의 동기화는 신뢰성 및 고속영역에서 스위칭각이 마이크로프로세서의 샘플링 주기에 의해 영향을 받게 된다. 본 논문에서는 실용적인 방식의 저가형 아날로그 엔코더를 제안한다. 또한 간단한 디지털회로를 사용한 제어신호를 생성하기 위한 제어알고리즘을 제시한다. 실험을 통하여 제안된 아날로그 엔코더의 성능을 검증하고 이를 이용한 스위칭각 제어방법에 대해 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.479-480
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.898-900
• /
• 2001

In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, which are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple analog type switching logic circuit is also presented in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.16-18
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. In the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper is suggested an optimal switching angle of a switched reluctance motor drive system for maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed As results, it improves the efficiency about 2[$\%$]. And a torque ripple is also reduced compared with that of the conventional switching angle magnetizing approach. In order to start softly regardless of a large ripple torque, the profile of phase current is predicted and current control mode was adapted when it is operated under the starting speed.