• 제목/요약/키워드: switched-mode

검색결과 278건 처리시간 0.022초

On Teaching Switched Mode Power Supplies - A Converter with Limited Duty Cycle

  • Himmelstoss, Felix A.
    • Journal of Power Electronics
    • /
    • 제10권6호
    • /
    • pp.667-672
    • /
    • 2010
  • A way how to teach a general understanding of switched mode power supplies (SMPS) is shown. A fourth order PWM DC-to-DC converter with limited duty cycle range is treated as an example and a survey over important data (maximum voltage and current ratings for the elements, rms- values for the semiconductor devices and a rough approximation of the losses) of the circuit is given. Furthermore, a converter model based on duty ratio averaging is established. Continuous mode of operation is used. The results make it possible to estimate the applicability of the given converter structure and offer sufficient material for the calculation, design, and analysis and give a better insight into switched mode energy conversion.

이산 시간 선형 스위치드 시스템의 스위칭 신호 및 상태에 대한 강인한 추정 알고리즘 (Robust Estimation Algorithm for Switching Signal and State of Discrete-time Switched Linear Systems)

  • 이찬화;심형보
    • 전자공학회논문지
    • /
    • 제52권5호
    • /
    • pp.214-221
    • /
    • 2015
  • 본 논문에서는 측정 잡음에 의해서 출력 신호가 왜곡된 이산 시간 선형 스위치드 시스템의 스위칭 신호와 상태 변수를 관측하기 위한 강인한 추정 및 검출 기법을 제시한다. 첫째, 최소 거리 기준에 기초한 작동 모드 추정 알고리즘이 제안된다. 이 과정에서 모드의 추정값을 얻게 되고, 이를 이용하여 상태 변수 또한 관측할 수 있게 된다. 둘째, 주어진 스위치드 시스템의 작동 모드 변화 시점, 즉, 스위칭이 언제 발생하는지 검출하는 알고리즘이 고안된다. 시스템에 인가되는 측정 잡음이 유계라는 가정 하에, 제안된 추정 알고리즘은 주어진 스위치드 시스템의 작동 모드를 정확하게, 그리고 상태 변수를 근사적으로 추정하며, 검출 알고리즘은 실제 스위칭이 발생한 후, 미리 정해진 지연 시간이 지나가기 전에 스위칭 시간을 검출할 수 있다.

SRM의 DC linke 전압리플을 고려한 단일 펄스 구동 방식의 특성 해석 (The Characteristic Analysis of SRM Dirven by Single-pulse Mode Considering the Voltage Ripple of DC Linke)

  • 이성구;정대성;이주
    • 전기학회논문지
    • /
    • 제57권11호
    • /
    • pp.1976-1980
    • /
    • 2008
  • This paper deals the characteristic analysis of Switched Reluctance Motor(SRM) driven by single-pulse mode considering dc link voltage ripple. Two dimensional time-stepped Finite Element Method(FEM) is used to analyze the characteristic of SRM driven by single-pulse mode with dc link voltage ripple. The analysis results is verified by experimental test.

퍼지 이론과 슬라이딩모드 제어를 이용한 스위치드 릴럭턴스 전동기의 토크리플 저감 (Torque Ripple Minimization for Switched Reluctance Motors Using a Fuzzy Logic and Sliding Mode Control)

  • 윤재승;김동희;신혜웅;이교범
    • 전기학회논문지
    • /
    • 제63권10호
    • /
    • pp.1384-1392
    • /
    • 2014
  • This paper presents a torque ripple reduction algorithm for the switched reluctance motor drives using the fuzzy logic and the sliding mode control. A turn-on angle controller based on the fuzzy logic determines the optimal turn-on angle. In addition, a sliding mode torque control (SMTC) methods reduces torque ripples instantaneously in the commutation region. The proposed algorithm does not require complex system models considering nonlinear magnetizing or demagnetizing periods of the phase current. According to the rotor speed and torque, the proposed controller changes the turn-on angle and reference torque instantaneously until the torque ripples are minimized. The simulation and experimental results verify the validity of minimizing the torque ripple performance.

Design of Sliding Mode Observer for Switched Reluctance Motor

  • Hwang, Young-Seong;Kim, Jin-Young;Choi, Jae-Dong;Kim, Kab-Dong;Seong, Se-Jin
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.434-437
    • /
    • 2001
  • Generally, a switched reluctance motor (SRM) drive requires a rotor position sensor for commutation and current control. However, this position sensor causes an increase for cost and size of motor drive. In this paper, a sliding mode observer is proposed for indirect position sensing in SRM drive. This estimated rotor position is used for the electric commutation of the machine phases. The paper includes a design approach and operating performance based on the proposed sliding mode observer.

  • PDF

반 능동형 RFID 태그를 위한 전원 제어 회로 설계 및 구현 (Design and Implementation of Power Management Circuit for Semi-active RFID Tags)

  • 김영교;이경일;조성규;남기훈;김시호
    • 전기학회논문지
    • /
    • 제59권10호
    • /
    • pp.1839-1844
    • /
    • 2010
  • A power management controller circuit with switched capacitor mode down regulator and battery charger block for semi-active RFID tags was proposed and fabricated. The main purposes of the proposed switched capacitor mode down regulator and battery charger block are to reduce standby current and to provide a self-controlled thin film battery charger by detecting the received RF power, respectively. Fabricated chip area is $360,000{\mu}m^2$ and measured standby current was about $1.3{\mu}A$. To further reduction of standby current, a wake-up circuit has to be included in the power management controller.

포화 흡수체의 투과변조깊이 조절을 통한 다양한 펄스상태 조작 방법에 관한 전산 모사 (Simulation of Manipulating Various Pulsed Laser Operations Through Tuning the Modulation Depth of a Saturable Absorber)

  • 진진화;염동일;김병윤
    • 한국광학회지
    • /
    • 제28권6호
    • /
    • pp.351-355
    • /
    • 2017
  • 본 논문에서는 포화흡수체의 투과변조깊이 조절을 통해 다양한 펄스 상태를 한 공진기 안에서 구현하는 방법에 관한 전산 모사를 진행하였다. 포화흡수체의 투과변조깊이의 크기 변화만으로 큐스위치드 레이저, 큐스위치드 모드 잠금 레이저, 모드 잠금 레이저 등 원하는 펄스 레이저 상태로 전환이 가능하다는 실험적 연구가 있어 왔으며, 이러한 연구가 이론적으로 부합하는 내용임을 확인하기 위해 Haus master 식을 사용하여 전산 모사를 진행하였다. 큐스위칭된 광 파워를 모사하기위해 이득 값은 시간 의존성을 가지도록 반응속도식을 적용하였다. 그 결과 투과변조깊이가 증가함에 따라 모드 잠금 레이저에서부터, 큐스위치드 레이저, 큐스위치드 레이저로 동작함을 확인하였고, 이는 이론적으로 예측된 경향성과 일치하였다.

The Roll Control of a Flight Projectile Using a Switched Reluctance Motor

  • Kim, Yongdae;Park, Kyihwan
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.74.2-74
    • /
    • 2002
  • $\textbullet$ Roll Control $\textbullet$ Switched Reluctance Motor $\textbullet$ Field Programmable Gate Array $\textbullet$ Single Pulse Mode Current Control $\textbullet$ OR/Off Angle Control

  • PDF

DECT 단말기용 Switchable VCO 설계 및 제작 (Design and Fabrication of Switchable VCO for DECT Handset)

  • 김상태;황수설;류준규;홍성용;이재명
    • 한국전자파학회논문지
    • /
    • 제11권4호
    • /
    • pp.634-641
    • /
    • 2000
  • DECT 단말기용 Switchable veo를 설계 및 제작하였다. 이중모드 단말기에서는 하나의 veo가 송.수신모 드의 규격을 만족하도록 두 개의 다른 주파수에서 동작되어야 한다. 이중 모드 veo는 하나의 공진부를 스위칭 한 VCO 두 개의 공진부를 스위칭한 veo 그리고 두개의 VCO를 스위칭한 형태가 있다. 본 논문에서는 하나의 공진부를 스위칭한 VCO를 사용하였는데, 핀 다이오드를 사용하여 공진부의 커패시턴스를 스위칭하였다. 측정 결과 바이어스 조건이 3V와 13mA일때 출력전력은 - 6.5 dBm 이상, 25 kHz offset 주파수에서 - 104 dEe/Hz의 위상잡음 특성을 나타내었다. 따라서 제작된 switchable VCO는 DECT 단말기에 적용할 가능함을 알 수 있다.

  • PDF

Development and Analysis of a Two-Phase Excitation Switched Reluctance Motor with Novel Winding Distribution Used in Electric Vehicles

  • Zhu, Yueying;Yang, Chuantian;Yue, Yuan;Zhao, Chengwen;Zhang, Yan
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권6호
    • /
    • pp.2364-2375
    • /
    • 2018
  • Two-phase simultaneous excitation mode of the switched reluctance motor (SRM) has been shown to effectively improve the average torque output compared with traditional single-phase excitation mode. But the torque ripple of the two-phase excitation SRM with traditional winding distribution increases because of the inconsistent electromagnetic field. To reduce the torque ripple, a two-phase excitation 8/6 SRM with novel winding distribution is proposed in this paper. The static torques generated by various magnetic circuits are analyzed and obtained to verify the torque increase. Then the electromagnetic characteristics of the proposed SRM are investigated by the numerical calculation method in detail, including flux linkage, inductance, and torque. Finally, an experiment for measuring the SRM static electromagnetic characteristics and dynamic performance is designed and performed based on the novel mode, and the comparing results show that the proposed two-phase SRM is effective.