• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.441-444
• /
• 2000

This paper covers the performance testing for layer 3 Ethernet switch based on various methodologies by which we can measure essential metrics such as throughput, latency, frame loss rate, and back to back frames. In the first place, layer 2 and layer 3 switch evolution is introduced followed by description of IP packet switching in layer 3 switch. And then, the above test metrics and test methodologies are illustrated as well. At last, we conduct the performance testing for layer 3 switch in case of transmitting packets of 64, 128, 256, 512, 1024, 1280, and 1518 byte size and analyze then results.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.549-556
• /
• 2010

Reliable fast working maglev switch is one of the key technologies needed for the maglev system to be commercialized. Switch for the maglev system is large, heavy, complicated, expensive compared with that of the traditional wheel-on-rail system. This paper reports the development of a segmented maglev switch for urban transit maglev system under construction for the 6.1 km long double track maglev commercialization line in Inchon international airport in 2012. Test results along with details of the segmented maglev switch components are reported.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.19-30
• /
• 1992

In this paper, a new large scale ATM switch architecture for Broadband ISDN is presented and its performance is analyzed mathematically. The proposed two-stage ATM switch consists of a sorting network and several unit switches. The proposed switch is self-routing and nonlocking. Its maximum through put is 100% without speed up which other output buffered switch needs. The hardware complexity mainly depends on that of a sorting network, but sorting network is easy to be implemented to VLSI because of its regularity in the structure.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.489-497
• /
• 2022

This work investigates the commutation characteristics of the current flowing through an electrical-contact-type switch to the semiconductor switch branch during the breaking operation of hybrid DC switchgear. A simple, reliable, low-cost natural commutation method is proposed, and the current commutation characteristics are analyzed in accordance with the conduction voltage drop of the semiconductor switch branch through experiments. A prototype 400 V/10 A class natural commutation type hybrid DC switchgear is set up. Its performance is verified, and its characteristics are analyzed.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.49-52
• /
• 1998

이동통신용 핵심 부품인 W-LAN용 RF-Switch를 설계 및 제작하였다. 본 연구에서 는 CAD를 이용한 전송선로 설계기술, 소형화, 다층화 설계기술, 이동통신용 MCM 부품의 패턴설계를 개발하였으며 RF-Switch 설계하는기법 소형화 및 다층화를 위한 MCM공법을 얻을수 있었다. Ant-Rx On시 삽입손실은 0.48dB로 나타났다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.142-145
• /
• 1986

The traffic characteristics of digital switch network depend on the structure, blocking probability, path searching method and etc. This paper presents the study of TDX-1 switch network traffic capacity by considering some decisive factors such as call processing software, switch network structure and control scheme. Conclusively the study shows that the switch network of TDX-1 can handle approximatly up to 1650 Erlang.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.836-839
• /
• 2005

A limit switch box is used for a indicator of a valve actuator. This device indicates an opening and closing of a valve or throttle in a valve actuator. In a ship, equipments are required safety and robustness because of a rough environment and a specific condition during a voyage. However, the limit switch box is used in an indoor environment generally. In order to evaluate the endurance of the limit switch box used in an indoor environment, the endurance tests against salt water have been conducted. Experiment results showed that the limit switch box was corroded severely. Thus, this study developed a new limit switch box which can be used at an outdoor environment. The housing of the developed limit switch box was made by an stainless steel to prevent corrosion.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2277-2287
• /
• 2015

In recent times, multilevel inverters are given high priority in many large industrial drive applications. However, the reliability of multilevel inverters are mainly affected by the failure of power electronic switches. In this paper, open-switch and short-switch failure of multilevel inverters and its identification using a high performance diagnostic system is discussed. Experimental and simulation studies were carried out on five level cascaded H-Bridge multilevel inverter and its output voltage waveforms were analyzed at different switch fault cases and at different modulation index values. Salient frequency domain features of the output voltage signal were extracted using the discrete wavelet transform multi resolution signal decomposition technique. Real time application of the proposed fault diagnostic system was implemented through the LabVIEW software. Artificial neural network was trained offline using the Matlab software and the resultant network parameters were transferred to LabVIEW real time system. In the proposed system, it is possible to precisely identify the individual faulty switch (may be due to open-switch (or) short-switch failure) of multilevel inverters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.167-173
• /
• 2005

The isolation of the series PIN diode switch is restricted by the parallel capacitance of PIN diode and the switch driver circuit limits switching speed of PIN diode switch. To overcome these problems, a high isolation and high switching speed Pin diode switch is proposed adapting the parallel resonant inductance and TTL compatible switch driver circuit. The measurement results of the 3 GHz PM diode switch show 1 GHz frequency band, less than 1.5 dB insertion loss, 65 dB isolation, more than 15 dB return loss and less than 30 ns switching speed. In particular the 3 GHz PIN diode switch using the parallel resonant inductance exhibits the improvement of isolation by 15 dB.