• Journal of Preventive Medicine and Public Health
• /
• v.52 no.4
• /
• pp.258-264
• /
• 2019

Objectives: The perceptions of family-planning (FP) acceptors regarding contraception influence the reasons for which they choose to switch their method of contraception. The objective of this study was to analyze the perceptions of contraception and rationales for switching contraceptive methods among female FP acceptors in West Nusa Tenggara, Indonesia. Methods: This study involved the analysis of secondary data from the Improve Contraceptive Method Mix study, which was conducted in 2013 by the Center for Health Research, University of Indonesia. The design of the study was cross-sectional. We performed 3 stages of sampling using the cluster technique and selected 4819 women who were FP acceptors in West Nusa Tenggara Province, Indonesia as the subjects of this study. The data were analyzed using multiple logistic regression. Results: The predominant pattern of switching contraceptive methods was switching from one non-long-term method of contraception to another. Only 31.0% of the acceptors reported a rational pattern of switching contraceptive methods given their age, number of children, and FP motivations. Perceptions of the side effects of contraceptive methods, the ease of contraceptive use, and the cost of the contraceptives were significantly associated (at the level of ${\alpha}=0.05$) with rational patterns of switching contraceptive methods. Conclusions: Perceptions among FP-accepting women were found to play an important role in their patterns of switching contraceptive methods. Hence, fostering a better understanding of contraception through high-quality counseling is needed to improve perceptions and thereby to encourage rational, effective, and efficient contraceptive use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.807-815
• /
• 2019

In this paper, we design a power amplifier to support quad-band in wireless communication devices using RF CMOS 180-nm process. The proposed power amplifier consists of low-band 0.9, 1.8, and 2.4 GHz and high-band 5 GHz. We proposed a structure that can support each input matching network without using a switch. For maximum linear output power, the output matching network was designed for impedance conversion to the power matching point. The fabricated quad-band power amplifier was verified using modulation signals. The long-term evolution(LTE) 10 MHz modulated signal was used for 0.9 and 1.8 GHz, and the measured output power is 23.55 and 24.23 dBm, respectively. The LTE 20 MHz modulated signal was used for 1.8 GHz, and the measured output power is 22.24 dBm. The wireless local area network(WLAN) 802.11n modulated signal was used for 2.4 GHz and 5.0 GHz. We obtain maximum linear output power of 20.58 dBm at 2.4 GHz and 17.7 dBm at 5.0 GHz.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.258-266
• /
• 2019

Objectives: In this study, blood lead was analyzed using graphite furnace atomic absorption spectrometry (GF-AAs) and inductively coupled plasma mass spectrometry (ICP-MS). We tried to examine the difference and consistency of the analytical values and the applicability of the analytical method. Methods: We selected 57 people who agreed to participate in this study. After confirming the linearity of the calibration standard curves in GF-AAs and ICP-MS, the concentrations of lead in quality control material and samples were measured, and the degree of agreement was compared. Results: The detection limit of the ICP-MS was lower than that of GF-AAs. The coefficient of variation of reference materials was shown to be stable in the ICP-MS and GF-AAs. When the correspondence between the two equipments was verified by bias of the analysis values, a concordance was shown, and approximately 98% of the ideal reference lines were present within ${\pm}40%$ of the deflection. Conclusion: GF-AAs showed high sensitivity to single heavy metal analysis, but it took much time and showed higher detection limit than ICP-MS. Therefore, it would be considered necessary to switch to ICP-MS analysis method, considering that the level of lead exposure is gradually decreasing.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1108-1121
• /
• 2019

The non-inverting buck-boost converter (NIBB) is a step-up and step-down DC-DC converter suitable for wide-input-voltage-range applications. However, when the input voltage is close to the output voltage, the NIBB needs to operate in the buck-boost mode, causing a significant efficiency reduction since all four switches operates in the PWM mode. Considering both the current stress limitation and the efficiency optimization, a novel design methodology for the optimal phase-shift modulation of a NIBB in the buck-boost mode is proposed in this paper. Since the four switches in the NIBB form two bridges, the shifted phase between the two bridges can serve as an extra degree of freedom for performance optimization. With general phase-shift modulation, the analytic current expressions for every duty ratio, shifted phase and input voltage are derived. Then with the two key factors in the NIBB, the converter efficiency and the switch current stress, taken into account, an objective function with constraints is derived. By optimizing the derived objective function over the full input voltage range, an offline design methodology for the optimal modulation scheme is proposed for efficiency optimization on the premise of current stress limitation. Finally, the designed optimal modulation scheme is implemented on a DSPs and the design methodology is verified with experimental results on a 300V-1.5kW NIBB prototype.

• International Area Studies Review
• /
• v.16 no.3
• /
• pp.53-73
• /
• 2012

In this study we investigate the ability of the yield spread to predict economic recessions in two Asian economies. For our purpose we use the data from two emerging economies (South Korea and Thailand) that are also known for their openness in terms of exports and imports. We employ both two-regime Markov-Switching model (MS) and three-regime MS model to estimate the probability of recessions during Asian crisis. We found that the yield spread is confirmed to be a reliable recession predictor for Thailand but not for South Korea. The three-regime MS model is better for capturing the Asian financial crisis than two-regime MS model. We also tried to find the duration of economic expansions and recessions. We tested the hypothesis of asymmetric movements of business cycles. The MS results are also compared with that of the standard probit model for comparison. The MS model does not significantly improve the forecasting ability of the yield spread in forecasting business cycles.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.31-40
• /
• 2018

We designed and implemented the attachable smart adapter for the general management of each company's agricultural machine regardless of whether it is equipped with a CAN (Controller Area Network) module. The smart adapter consists of a main board (Raspberry Pi3B), which operates agricultural machine's management software in Linux environment, and a self-developed interface board for power adjustment and status sensing. For the status monitoring, a sensing interface using a serial input was defined between the smart adapter and the sensors of the agricultural machine, and the state diagram of the agricultural machine was defined for diagnosis. We made a panel to simulate the sensors of the agricultural machine using the switch's on/off contact point, and confirmed the status monitoring and diagnostic functions by inputting each state of the farm machinery from the simulator panel.

• Archives of Craniofacial Surgery
• /
• v.19 no.4
• /
• pp.254-259
• /
• 2018

Background: The esthetic and functional outcomes of periorbital defect reconstruction are very important because of the complex anatomy and specialized functions of this region. The orbicularis oculi myocutaneous (OOMC) flap is useful for the reconstruction of periorbital defects. But, according to the location and depth of the defects, the reconstruction using OMC flaps with various techniques is rare. The authors have used various kinds of OOMC flaps in various situations and we present an analysis of our experiences. Methods: From November 2001 to July 2017, we used 36 OOMC flaps to reconstruct 30 periorbital defects in 25 patients. We analyzed the cause of the defect, its location, the type of concomitant surgery, the method of flap movement, and complications. Results: Of the 30 defects, basal cell carcinoma was the most common cause, accounting for 20 cases. When the used OOMC flap was classified according to the location of the defects, the switch flap was used in nine cases among 15 defects of lower eyelid, and the V-Y advancement flap was mainly used for other parts. As surgical methods according to the depth of defect were classified, all cases involving the tarsal plate were reconstructed with a composite graft. In case of skin and muscles, they were reconstructed only with OOMC flap or with full-thickness skin graft. Conclusion: The OOMC flap provides good skin quality that is very similar to that of the defect tissue. Depending on the location and depth of the defect, the OOMC flap may be used properly in a variety of ways to achieve good results.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.37-49
• /
• 2018

In this study, we conducted an exploratory study for designing service science as a degree program that will lead the 21st century. In the new era, the convergence of industries is accelerating and the mobility of the profession is greatly increased, so the talents to be trained in higher education will be greatly changed. We must cultivate human resources capable of creating their own jobs through competency development and cultivate talented individuals who can demonstrate creative initiative in the ecosystem where the boundaries between industries are dismantled. To this end, it is required to switch from the existing vertical majors and systems to horizontal majors, and service majors are expected to play a key role in this transition. In this study, we designed the service science degree program reflecting the changes of the new economy and reflecting the demand of the new education. The service science curriculum provides an analysis as it can award a degree as an independent major, or may serve as a sub-major or an associate major with existing majors. Service studies are expected to play the most effective role in cultivating the capabilities defined by the 21st century human resources in the World Economic Forum.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.1-23
• /
• 2018

This study suggests a way through Hong Kong as an alternative strategy for Korean companies to enter Chinese service market which is rapidly expanding due to China's recent policy switch toward service economy. Service market is generally more regulated, labor-intensive, and domestic demand-oriented than goods market, which makes opening of domestic markets to foreigners slow. In case of China, market control and regulations by the State is tighter than other economies. Therefore, it is important to find ways to avoid regulations from the Chinese government if possible. In this sense, this study investigates the China-Hong Kong CEPA and draws its strategic value for entering Chinese service market by comparing it with the Korea-China FTA service sector. In addition, utilizing the difference in tax agreements between Korea-China and China-Hong Kong, and the human network of Hong Kong entrepreneurs in China may play an important role in reducing the risk that might arise in China.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.393-399
• /
• 2018

The development of unmanned AI continues, and the development of AI unmanned is aimed at more efficiently, accurately, and speedily the work that has been resolved by manpower such as industry, welfare, and manpower. AI unmanned technology is evolving in various places, and it is time to switch to unmanned systems from many industries and factories. We take this into consideration, and use the Deep Learning technology, which is one of the core technologies of artificial intelligence (AI), not the manpower but the fruits that pour the rails at once in a large orchard. We want to study the unmanned fruit sorting machine that can be operated under manager's supervision without dividing the fruit by type and grade and dividing by country of origin and grade. This unmanned automated classification system aims to reduce the labor cost by minimizing the manpower and to improve the