• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.125-136
• /
• 2016

Recently, many people switch from an open SNS like facebook to a closed SNS like Kakaostory to expect more empathetic responses. In this study, I derive the design factors that motivate empathetic responses in SNS. In particular, I focus on Kakaostory that is popular for women in their 30s and 40s. I conduct literature review and survey and find out the design factors and identified the type of photos that induce comments and feeling icons. While writing comments is influenced by the relationship with the poster and the contents, adding a feeling icons is affected by the states of the responders. The heavy users are more affected by the contents than by relationship. The photos with more responses have better image quality and capture situation better. The photos with more comments are cuter, brighter, and more positive. The photos with feeling icons only are visually sophisticated. This results can be useful to develop a design that induce empathetic responses.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.498-511
• /
• 2013

It is time to extensively reshuffle domestic film industry, which has grown rapidly in recent years. Above all, a most urgent task for domestic film industry is to train specialized staff by working out a foundation for on-site human resource education. For this, it is necessary to review the existing apprenticeship system-a major educational system for domestic film industry for a long time-and then work out a reasonable substitute which can overcome its limitations and succeed its advantages. In other words, it is necessary to switch a current perpendicular rank system, a basis of apprenticeship system, to a horizontal specialized staff system and then establish an industrial information network with which the current status of on-site human resources can be understood and which can comprehensively manage their career, promotion and wages. In this regard, this study suggested the introduction of workplace learning and mentoring as a new system for on-site human resource education for film industry, in order to work out an educational system that could maintain abundant on-site experience and the sense of emotional tie with fellow workers-the advantages of apprenticeship system-and realize a more systematic and specialized workplace learning.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

The introduction of GSMP open interface to OBS network can materialize to separate the transport plane and the control plane in OBS network. This makes the implementation of OBS switches simple and provides various flexibility. However, the introduction of open interface will cause the connection setup delay because of the additional processing overhead of open interface protocol. Also, in GSMP based network, the location of network management functions are not defined explicitly and the research result about the OBS network management is almost nothing. This paper proposes a parallel connection setup mechanism using centralized connection control server to minimize connection setup delay in OBS network with GSMP open interface and defines managed objects to support connection, configuration, performance, and fault management for the management of OBS network with GSMP open interface. This paper also proposes a distributed network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verify the possibility of OBS control and network management by implementing network management function using proposed parallel connection setup mechanism and distributed network management model.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.905-912
• /
• 2004

It is a study LVMPD to solve the fairness problem of inter-session shared bandwidth. Whenever congestion occurs in one session, the highest layer is dropped. Also the highest layer of other sessions in non-congestion is dropped by iner-session fairness. While there is spare bandwidth, receivers of session in non-congestion can't use bandwidth efficiently. In this paper, we proposed a distribution method to use efficiently spare bandwidth that occurred by inter-session fairness. In our method, we considered the highest layer those receivers receiving and the higher layer those receivers requesting. The sender assigns the packet-deleting priority to packets when congestion occurs in receivers, and sets layer add/drop flag when receivers of session in non-congestion request the higher layer. The switch deletes packets with packet-deleting priority and transfers packets with layer add/drop flag for session in non-congestion. Therefore receivers of session in non-congestion can add the higher layer. In experimental results, it was known that proposed algorithm use the inter-session shared bandwidth more effectively compared with already known method.

• Journal of the Korean Magnetic Resonance Society
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2015

Hsp33 is a prokaryotic molecular chaperon that exerts a holdase activity upon response to an oxidative stress at raised temperature. In particular, intramolecular disulfide bond formation between the four conserved cysteines that bind a zinc ion in reduced state is known to be critically associated with the redox sensing. Here we report the backbone NMR assignment results of the half-oxidized Hsp33, where only two of the four cysteines form an intramolecular disulfide bond. Almost all of the resolved peaks could be unambiguously assigned, although the total assignments extent reached just about 50%. Majority of the missing assignments could be attributed to a significant spectral collapse, largely due to the oxidation-induced unfolding of the C-terminal redox-switch domain. These results support two previous suggestions: conformational change in the first oxidation step is localized mainly in the C-terminal zinc-binding domain, and the half-oxidized form would be still inactive. However, some additional regions appeared to be potentially changed from the reduced state, which suggest that the half-oxidized conformation would be an intermediate state that is more labile to heat and/or further oxidation.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.220-229
• /
• 2017

In this paper, To take advantage a variety of DC power as the boost DC-DC converter design specifications through the inductor L and capacitor C through PSPICE to calculate the best estimate of the value. Boost DC-DC converter with a switch device using IRF840 and reverse recovery time Schottky diodes with excellent with constant current controller using D10SC6M and resistance can be configured to considering the Power LED Module was driven by the production. Converter's switching frequency is 50 kHz, the first Duty Rate was made to increase gradually depending on the value of the detection were, 10 % in the output voltage. As a result, the simulated Boost Power LED driver characteristics is in comparison with the design specifications, 5% or less as the error was approximated. Finally, when input 15 V were offered, a stable output 24 V were obtained. and Dimming Control through the adjustment of brightness and current consumption were possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1073-1081
• /
• 2005

This paper describes a 3.3 V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method. Most of Dfh converters with hiか speed current drive are an architecture choosing current switch cell, column, row decoding method but this decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. The designed D/A converter with an active chip area of $0.953\;mm^2$ is fabricated by using a 0.35um process. The simulation data shows that the rise/fall time, settling time, and INL/DNL are 1.92/2.1 ns, 12.71 ns, and a less than ${\pm}2.3/{\pm}58$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3 V is about 224 mW.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.892-901
• /
• 2001

Despite of many advantages over conventional radio paths, application of the Meteor Burst Path in commercial communication system is so far limited to a few extent because of its low duty rate, which is, less than several percent at best. In order to get through maximum number of data bits during the short interval of each burst, which normally lives a fractions of a second, a sophisticated communication protocol is called for. In this paper, author introduces a communication protocol which can effectively locate and fetch burst signal by sending out periodic detection signal from master station and, with minimal delay, switch over to transmission states so as to put as many data bits through the detected burst as the burst length permits. By analyzing time period required for each transaction steps, the author derives optimal packet length for various bursts which assures to get a message string through in minimum delay. According to the analysis, the author proposes a protocol including a routine which automatically accesses average length of bursts at each environment and automatically adapt length of data packet so as to maximize data throughput under Riven burst conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1141-1149
• /
• 2009

Pulse style Nd: YAG Laser is suitable in skin remaking treatment, in compliance with the ramp continuous oscillation until of course normal takeoff, the Q-switch and mode motive takeoff the takeoff form which is various is possible and it is coming to be widely used in microsurgery and skin remaking promotion. According to therapeutic objective very it is important to control a energy density. Control of energy density the method which controls the pulse repetition rate of Laser output is mainly used. From the research which it sees pulse style Nd: It will be able to control the pulse repetition rate of YAG, the 2nd harmonic occurrence Laser (second harmonic generation: SHG) with the energy part of the light-wave which is a footnote wave number will hold and nonlinear decision it propagates and is converted by energy of the light-wave which is a footnote wave number the actual condition which and it applies the second harmonic occurrence in compliance with a secondary nonlinearity it leads and until skin deep part therapeutic possibility is the thing it will be able to observe simply.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.326-326
• /
• 2014

It has been known since the mid 1960s that Ag can be photodissolved in chalcogenide glasses to form materials with interesting technological properties. In the 40 years since, this effect has been used in diverse applications such as the fabrication of relief images in optical elements, micro photolithographic schemes, and for direct imaging by photoinduced Ag surface deposition. ReRAM, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of a conductive filament in a solid electrolyte. Especially, Ag-doped chalcogenide glasses and thin films have become attractive materials for fundamental research of their structure, properties, and preparation. Ag-doped chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in ReRAM devices. In this paper, we investigated the nature of thin films formed by the photo-dissolution of Ag into Ge-Se glasses for use in ReRAM devices. These devices rely on ion transport in the film so produced to create electrically programmable resistance states [1-3]. We have demonstrated functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of Ag+ ions photo-induced diffusion in thin chalcogenide films is considered. The influence of Ag+ ions is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Saturated Ag+ ions have been used in the formation of conductive filaments at the solid electrolyte which is the active medium in ReRAM devices. Following fabrication, the cell displays a metal-insulator-metal structure. We measured the I-V characteristics of a cell, similar results were obtained with different via sizes, due to the filamentary nature of resistance switching in ReRAM cell. As the voltage is swept from 0 V to a positive top electrode voltage, the device switches from a high resistive to a low resistive, or set. The low conducting, or reset, state can be restored by means of a negative voltage sweep where the switch-off of the device usually occurs.