• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.19-28
• /
• 2000

The purposes of this study are two folds: a) to introduce conjoint choice model to research the choice behavior of theme park users, and b) to suggest the strategies to strengthen the competitiveness of theme parks. The major four theme parks in Seoul metropolitan areas were selected as study areas. A leading polling agency was employed to select 432 respondents by probability sampling and to conduct face-to-face interview. Both alternative generating and choice set generating fractional factorial design were conducted simultaneously to meet the necessary and sufficient conditions for calibration of the conjoint choice model. Dummy coding was used to represent the attribute levels, and the alternative-specific model was calibrated. The goodness-of-fit of the model was quite satisfactory($\rho$$^2$=0.47950), and most parameters values had to expected sign and magnitude. Car was preferred transport mode to shuttle bus for visiting theme parks ; however the most ideal attribute levels only were estimated significantly. Most attribute levels of shuttle bus were estimated significantly except the Dream Land, which is the least attractive park among study areas. Simulation results showed that the shuttle bus was a mode worth providing to switch the current car dominant visiting pattern of theme parks, which will be one the effective strategies to attract more patrons, especially for potential users adjacent to parks. Several ideals were suggested for future researches, in terms of utilization of more general utility function and new base alternative, and inclusion of more salient attributes such as constraints in the model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.23-30
• /
• 2010

A detailed circuit level model requires a small sampling time to represent high frequency switching behaviors with proper resolution. The small sampling time leads a large execution time to obtain the system analysis results. As the alternative of the detailed circuit model, an averaged PWM switch model was proposed for the rapid system level analysis. There exists a voltage distortion between the reference and output voltage because of non-ideal switching characteristics, such as the dead-time, diode forward voltage drop and conduction resistance. This paper analyzed causes and effects of the voltage distortion. The average inverter model, which reflecting this voltage distortion, is developed for the rapid and accurate analysis of automotive electric drive system in MATLAB/Simulink environment. The rapidity and accuracy of the proposed inverter model is proved through comparison between simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.45-53
• /
• 2013

Fuel cell power system is one of the most promising energy source for the alternative energy because it has unique advantages such as high energy density, no power drop during operation, and feasible to make compact size. However, due to very low response time, fuel cell is difficult to correspond to drastic load changes and start-up operation. For solving these problem, fuel cell power system must include energy storage device such as Li-Poly battery or super capacitor. Therefore, bi-directional DC-DC converter must be required for this storage device and fuel cell-PCS control. This paper presents a design and modeling of the bi-directional DC/DC converter. Firstly, we present modeling the boost and buck mode of the bi-directional converter through both PWM switch model and state space averaging technique. Secondly, in order to minimize output ripple and transient response overshoot, we have two identical DC-DC converters interleaved and adopt two-loop voltage-current controller. The proposed bi-directional DC-DC converter's modeling method and control design have been verified with computer simulation and experimentation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1791-1804
• /
• 2018

To achieve a fast dynamic response and to solve the multi-objective control problems of the output currents, capacitor voltages and system constraints, this paper proposes a deadbeat and hierarchical predictive control with space-vector modulation (DB-HPC-SVM) for five-level nested neutral point piloted (NNPP) converters. First, deadbeat control (DBC) is adopted to track the reference currents by calculating the deadbeat reference voltage vector (DB-RVV). After that, all of the candidate switching sequences that synthesize the DB-RVV are obtained by using the fast SVM principle. Furthermore, according to the redundancies of the switch combination and switching sequence, a hierarchical model predictive control (MPC) is presented to select the optimal switch combination (OSC) and optimal switching sequence (OSS). The proposed DB-HPC-SVM maintains the advantages of DBC and SVM, such as fast dynamic response, zero steady-state error and fixed switching frequency, and combines the characteristics of MPC, such as multi-objective control and simple inclusion of constraints. Finally, comparative simulation and experimental results of a five-level NNPP converter verify the correctness of the proposed DB-HPC-SVM.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.403-412
• /
• 2019

Aiming at the problems of large dv/dt and di/dt in traditional single-ended converters and high electromagnetic interference (EMI) noise levels, a single-ended isolated converter using the secondary resonance technique is proposed in this paper. In the proposed converter, the voltage stress of the main power switch can be reduced and the voltage across the output diode is clamped to the output voltage when compared to the conventional flyback converter. In addition, the peak current stress through the main power switch can be decreased and zero current switching (ZCS) of the output diode can be achieved through the resonance technique. Moreover, the EMI noise coupling path and an equivalent model of the proposed converter topology are presented through the operational principle of the proposed converter. Analysis results indicate that the common mode (CM) EMI noise and the differential mode (DM) EMI noise of such a converter are deduced since the frequency spectra of the equivalent controlled voltage sources and controlled current source are decreased when compared with the traditional flyback converter. Furthermore, appropriate parameter selection of the resonant circuit network can increase the equivalent impedance in the EMI coupling path in the low frequency range, which further reduces the common mode interference. Finally, a simulation model and a 60W experimental prototype of the proposed converter are built and tested. Experimental results verify the theoretical analysis.

• Journal of Information Technology Applications and Management
• /
• v.30 no.2
• /
• pp.45-57
• /
• 2023

Efforts to build metaverse platform services and expand profit structure are developing in a more realistic direction. The metaverse, which has been centered on 'creation and economy' and 'discovery', will evolve into an 'experience' metaverse, creating tangible business effects where satisfaction with the user experience leads directly to purchase. In this paper, the condition of the avatar used as a medium of economic activity between the metaverse platformer and the user and the business utilization plan were sought. In addition, a new 'metaverse business model' was proposed based on 'experience, discovery, creation and economy', and in particular, it was intended to lay the foundation for the experience metaverse to further develop in the form of 'business experience'. In addition, a survey was conducted on the 'application of metaverse service and avatar' targeting the MZ generation, the main customer base of the current metaverse service. In order to provide a service that satisfies the user, it was concluded that the appearance of the avatar needs to be changed according to the purpose and function. Accordingly, we propose an 'selective switch mode' that can change the avatar's appearance at the desired timing according to the 'experience' and 'purchase purpose' of each metaverse service area. In addition, by strategically utilizing the 'Digilog' psychology, we believe that it will be possible to promote the influx of new users while increasing the loyalty of existing users to the platform. Through the establishment of 'avatar purchase system' by 'selective switch mode' and 'avatar decorating system' by 'digilog' strategy, the experience metaverse, which has been focused on 'digital twin experience' so far, is As it develops into 'business experience', it is expected that the user experience can be further satisfied.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.91-100
• /
• 2008

The previous works in sensor networks security have focused on the aspect of confidentiality, authentication and integrity based on cryptographic primitives. There has been no prior work to assess the survivability in systematic way. Accordingly, this paper presents a survivability model of wireless sensor networks using software rejuvenation for dual adaptive cluster head. The survivability model has state transition to reflect status of real wireless sensor networks. In this paper, we only focus on a survivability model which is capable of describing cluster head compromise in the networks and able to switch over the redundant cluster head in order to increase the survivability of that cluster. Second, this paper presents how to enhance the survivability of sensor networks using software rejuvenation methodology for dual cluster head in wireless sensor network. We model and analyze each cluster as a stochastic process based on Semi Markov Process (SMP) and Discrete Time Markov Chain (DTMC). The proof of example scenarios and numerical analysis shows the feasibility of our approach.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1034-1051
• /
• 2016

Mobility models are invaluable for determining the performance of routing protocols in opportunistic networks. The movement of nodes has a significant influence on the topological structure and data transmission in networks. In this paper, we propose a new mobility model called the campus-based community mobility model (CBCNM) that closely reflects the daily life pattern of students on a real campus. Consequent on a discovery that the pause time of nodes in their community follows a power law distribution, instead of a classical exponential distribution, we abstract the semi-Markov model from the movement of the campus nodes and analyze its rationality. Then, using the semi-Markov algorithm to switch the movement of the nodes between communities, we infer the steady-state probability of node distribution at random time points. We verified the proposed CBCNM via numerical simulations and compared all the parameters with real data in several aspects, including the nodes' contact and inter-contact times. The results obtained indicate that the CBCNM is highly adaptive to an actual campus scenario. Further, the model is shown to have better data transmission network performance than conventional models under various routing strategies.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.2
• /
• pp.39-45
• /
• 2012

The objective of this study was to analyze the determinant factors in the new agricultural technology acceptance targeted to the automatic switchgear for heat-retaining mulching used on the oriental melons farms. The probit and the logit models were estimated using survey data. The result indicated that the level of income, innovativeness, and reliability are important factors of the new agricultural technology acceptance. Therefore, it is considered the level of income, innovativeness, and reliability in advance to extend the new agricultural technology quickly.