• Reproductive and Developmental Biology
• /
• v.29 no.3
• /
• pp.155-162
• /
• 2005

The present study evaluated whether an exogenous antioxidants, taurine and $\alpha$-tocopherol, could, when added to the freezing extender, improve the post-thaw sperm characteristics, function, the level of reactive oxygen species (ROS) generation, and the level of lipid peroxidation (LPO) in frozen-thawed porcine semen. CASA (computer-aided sperm analysis), HOST (hypoos-motic swelling test), chemiluminescence using luminol and lucigenin and the detection of malondialdehyde for LPO was performed in frozen-thawed porcine sper-matozoa. The results obtained in these studies are as follows. While no beneficial effects of taurine and $\alpha$-tocopherol supplementation were visible in motility, viability, acrosome reaction, tail swelling patterns, and the generation of $O^{2-}$ of frozen-thawed porcine sper-matozoa, $H_{2}O_{2}$ was decreased by all treatments except taurine 50mM treatment. In conclusion the taurine and $\alpha$-tocopherol treatments during freezing reduced generation of reactive oxygen species and production of malondialdehyde in frozen-thawed porcine semen, and the ROS savangers may minimize various damages of spermatozoa during freezing.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.3-15
• /
• 1975

How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.406-417
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the functionalities such as the deodorization and the absorbability on the green tea-wood fiber hybrid boards in the previous researches. The effects of kind of raw materials and the component ratio of raw materials on dimensional stability, deodorization and emission of formaldehyde were investigated. Thickness swelling of the hybrid composite boards increased with increasing of component ratio of green tea and charcoals, but the values were markedly lower than that of Korean standard (KS) for commercial medium density fiber board (MDF), except for hybrid composite boards composed of greed tea, activated charcoal and wood fiber. Reduction rate of ammonia gas for the hybrid composite boards composed of green tea, activated charcoal and wood fiber showed a high value of 96% after 30 minute from the beginning of the test, and the other hybrid boards also showed a high value of about 95% after one hour. Emission amount of formaldehyde was similar to that of $E_0$ grade in case of using $E_1$ grade urea resin, and was similar to that of super $E_0$ grade in case of using $E_0$ grade urea resin.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.605-613
• /
• 1992

NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.63-69
• /
• 1991

This study was undertaken for the purpose of studying the physicochemical propery of mungbean and texture of mungbean starch gels. Mungbean starch gel made with different levels of oil were tested to investigate the textural characteristics by mechanical test. The results are summerized as fallows: The content of moisture fat, protein, and ash in Seonwha mungbean were shown to be about 13.19%, 1.02%, 23.57% 3.13% respectively. Those of Seonwha mungbean crude starch were 12.48%, 0.63%, 0.94%, 0.13% respectively. The gain of dry crude starch from peeled mungbean was 22.48%. Water binding capacity of Seonwha mungbean crude starch was 183.1%. The pattern of change in swelling power of Seonwha mungbean crude starch for increasing temperature increased slowly to $70^{\circ}C$, and then increased rapidly. The pattern of change in solubility was similar to that of swelling power. The amylose and amylopectin content were 22.5%, 77.5%. Brabender hot-paste viscosities of mungbean crude starch at 8% and 10% showed the similar amylogram patterns with peak vicosity. By the Rheometer measurement result of 8% 10% mungbean starch gel, Hardness and Fractuability tended to be decreased as the addition level of oil increased. Elasticity, Adhesiveness, Chewiness, L, a, and b value tended to be increased as the addition level of oil increased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.186-191
• /
• 2012

The sodium hypochlorite is widely used in endodontic treatment. While it is effective solution for disinfection of root canal system, complications during canal irrigation are rarely reported, especially in primary teeth. This report demonstrates that sodium hypochlorite extruding through the root apex might cause severe complications. A 4-year-old female patient was referred from local dental clinic to the emergency room for the management of sudden facial swelling and pain during re-endodontic treatment of the maxillary primary central incisor using sodium hypochlorite. The patient was given systemic steroids, antihistamines, antibiotics and analgesics and the maxillary primary central incisor was extracted to prevent secondary infection. Swelling began to subside after 2 days. A negative result was obtained from skin patch test with sodium hypochlorite. Thorough care must be taken in primary teeth to prevent the inadvertent injection of sodium hypochlorite to periapical tissues during root canal irrigation. When adverse reaction occurs, proper management such as analgesia, cold compression and adequate medication should be done.

• Archives of Pharmacal Research
• /
• v.29 no.5
• /
• pp.375-383
• /
• 2006

The anti platelet effects of a novel guanidine derivative, KR-32570 ([5-(2-methoxy-5-chlorophenyl) furan-2-ylcarbonyl]guanidine), were investigated with an emphasis on the mechanisms underlying its inhibition of collagen-induced platelet aggregation. KR-32570 significantly inhibited the aggregation of washed rabbit platelets induced by collagen $(10{\mu}g/mL)$, thrombin (0.05 U/mL), arachidonic acid $(100{\mu}M)$, a thromboxane (TX) $A_2$ mimetic agent U46619 (9,11-dideoxy-9,11-methanoepoxy-prostaglandin $F_2,\;1{\mu}M$) and a $Ca^{2+}$ ATPase inhibitor thapsigargin $(0.5{\mu}M)$ ($IC_{50}$ values: $13.8{\pm}1.8,\;26.3{\pm}1.2,\;8.5{\pm}0.9,\;4.3{\pm}1.7\;and\;49.8{\pm}1.4{\mu}M$, respectively). KR-32570 inhibited the collagen-induced liberation of $[^3H]$arachidonic acid from the platelets in a concentration dependent manner with complete inhibition being observed at $50{\mu}M$. The $TXA_2$ synthase assay showed that KR-32570 also inhibited the conversion of the substrate $PGH_2$ to $TXB_2$ at all concentrations. Furthermore, KR-32570 significantly inhibited the $[Ca^{2+}]_i$ mobilization induced by collagen at $50{\mu}M$, which is the concentration that completely inhibits platelet aggregation. KR-32570 also decreased the level of collagen $(10{\mu}g/mL)$induced secretion of serotonin from the dense-granule contents of platelets, and inhibited the NHE-1-mediated rabbit platelet swelling induced by intracellular acidification. These results suggest that the antiplatelet activity of KR-32570 against collagen-induced platelet aggregation is mediated mainly by inhibiting the release of arachidonic acid, $TXA_2$ synthase, the mobilization of cytosolic $Ca^{2+}$ and NHE-1.

• Biomolecules & Therapeutics
• /
• v.4 no.2
• /
• pp.127-137
• /
• 1996

This study was performed to investigate the toxicity of DA-125 in beagle dogs, an anthracycline antitumor antibiotic. The dogs were administered DA-125 i.v. at 0.0023, 0.0375, 0.15 and 0.6 mg/kg/day, 6 days/week for 26 weeks. At 0.6 mg/kg, all male and female dogs were either sacrificed moribundly or dead during the 26-week treatment. The dogs revealed inactivity, salivation, dark bloody discharge, swelling of the subcutaneous injection site, abscess, and ulceration in the abdominal wall and legs. At 0.15 mg/kg, anorexia, salivation, and swelling of the injection site were observed. The food consumption was decreased with a statistical significance at 6 and 12 weeks treatment in males of 7.6 mg/kg. At 0.0375, 0.15 and 0.6 mg/kg, body weights were decreased significantly in a dose-related fashion after 17 weeks treatment. Total white blood cell counts for male dogs at 0.6 mg/kg were lower than those of control dogs after 13 weeks treatment, which appeared mainly due to decreased neutrophils. At 0.15 mg/kg, testicular atrophy was found in all males by gross pathology and the testicular weights were significantly decreased when compared to those of control males. Microscopically, the testis showed moderate atrophy of the seminiferous tubules and marked decrease in number of spermatozoa in the epididymal tubules. At 0.6 mg/kg, petechia or echymotic hemorrhage was observed in gastrointestinal tract, heart, lungs, and other organs at the necropsy, Marked atrophy of thymus were observed in both males and females. In addition, severe testicular atrophy was noted in all males. Microscopically, gastrointestinal tract showed hemorrhage, epithelial denudation, hypermucus secretion, and atrophy of intestinal villi. Seminiferous tubules of the atrophic testis were lined with Sertoli cells only and devoid of germ cells. Severe oligospermia or aspermia was present in the epididymal tubules. Bone marrow showed marked depletion of hemopoietic cells. In addition, marked atrophy was found in the lymphoid tissue of gastrointestinal tract, various Iymph nodes, and thymus. Injection sites showed marked inflammatory response with necrosis, necrotizing vasculitis, thrombus formation, and ulceration in the skin. According to the present results, no observed effect level appeared to be 0.0375 mg/kg. At 0.15 mg/kg, testis was a target organ, while at 0.6 mg/kg hemopoietic tissue, gastrointestinal tract, and testis were considered to be target organs. At 0.6 mg/kg the test compound seems to inflict a damage on the blood vessels causing hemorrhage in the various organs and tissues.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.184-189
• /
• 2008

Effects of sucrose at different concentrations (0, 10, 20, and 30%, w/w) on steady and dynamic shear rheological properties of sweet potato starch (SPS) paste (5%, w/w) were investigated. The steady shear rheological properties of SPS-sucrose composites were determined from rheological parameters based on power law and Casson flow models. At 25$^{\circ}C$ all the samples showed pseudoplastic and thixoropic behavior with high yield stress. Consistence index (K), apparent viscosity (${\eta}_{a,100}$), and yield stress (${\sigma}_{oc}$) values of SPS-sucrose composites decreased with increasing sucrose concentration from 10% to 30%. The decrease of swelling power was observed at higher sucrose concentration (>20%) and the low swelling power yielded a lower K, ${\eta}_{a,100}$, and ${\sigma}_{oc}$ values. In temperature range of 25-70$^{\circ}C$, Arrhenius equation adequately assessed variation with temperature. Oscillatory test data showed weak gel-like behavior. Magnitudes of storage (G') and loss (G") moduli increased with an increase in sucrose concentration and frequency. The SPS-sucrose composite at 30% concentration closely followed the Cox-Merz superposition rule.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This study was performed to determine the characteristics of particleboard made from three-months-old bamboo, (Phyllostachys nigra var henonis Stapf) grown in Damyang district, Korea. Total 60 particleboards were manufactured with 1% of liquid wax emulsion using urea-formaldehyde resin content 9%,11% and 13%, respectively. The particle boards consisted of three layers, in which face layer had the same proportion of a weight 25% of the particleboard each. And the core layer had a weight 50% of the board. The core layer and face layer had the particle dimension passing 6 mesh (3.35 mm), 12 mesh (1.70 mm), respectively. The study was carried out to determine the effect of the growing time of 3 months and 3 years on particleboard properties. The physical and mechanical properties of boards were measured and compared to the Korean standard (KS) requirements of particle boards. The results were as follows; 1. The longer the growing time, the higher the density of bamboo. Density of the upper part of bamboo showed higher than that of lower part. 2. Density and moisture content of the two particle boards did not show significant differences. Three-months-old bamboo particleboard gave higher thickness swelling than three-years-old bamboo particleboard. Bamboo particleboard passed the thickness swelling test of KS. 3. The static bending and internal bond strength of three-months-old bamboo particleboard were higher than those of three-years-old bamboo. Increase of resin contents in bamboo particleboard increased bending and internal bond strength, proportionally. Strength properties of bamboo particle board were above KS. 4. Formaldehyde emission of all the bamboo particleboards satisfied E₂ level (5.0 mg/L) of KS F 3104.