• Korean journal of food and cookery science
• /
• v.26 no.1
• /
• pp.32-40
• /
• 2010

This study was performed to determine the quality characteristics of mugwort-Sulgi with added chemical leavening agents. Mugwort-Sulgi was prepared with different levels of baking soda (0.3, 0.6, and 0.9%) and baking powder (0.3, 0.6, and 0.9%) and stored for 4 days. The a value significantly decreased with the addition of baking soda, and the b value significantly decreased over storage time. The pH value was significantly increased by the addition of baking soda, and significantly decreased with baking powder. The rate of swelling and poring was significantly increased with the addition of baking powder, and significantly decreased with baking soda. Hardness, springiness, cohesiveness, and gumminess were significantly increased with the addition of baking soda, while it significantly decreased with the addition of baking powder. According to sensory evaluation, taste, texture, and overall acceptance were highest in mugwort-Sulgi with 0.6% baking powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.657-663
• /
• 2012

The spherical mesoporous silica is synthesized and incorporated with CdSe/ZnS quantum dots(QDs) for preparing micro beads to detect toxic and bio-materials with high sensitivity. The spherical silica beads with the brunauer-emmett-telle(BET) average pore size of 15 nm were prepared with a ratio 1, 3, 5-trimethylbenzen, as a swelling agent, to the block-copolymer template surfactant of over 1 and under vigorous mixing condition. The surface of spherical mesoporous silica is modified using octadecylsilane for incorporating QDs. Based on photoluminescence(PL) spectra, the relative brightness of mesoporous silica beads incorporated with 10 nM of QDs is 79,000 times brighter than that of Rodamine 6 G.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.145-149
• /
• 2000

We performed the geotechnical experiments of the hydraulic conductivity and compressive strength test with the stabilized soil in the laboratory, proved that it is useful to use the stabilized soil as an alternative for natural clay soil. Also, for mixing adding materials in the stabilized soil, it was determined that 1) the optimal mixing ratio of cement : bentonite : stabilizing agent was 90:60:1 of mass ratio(kg) for 1㎥ with soil, 2) it was also possible to use low quality bentonite(B\circled2) classified by swelling grade because of little difference from results of the hydraulic conductivity and compressive strength test with high quality bentonite(B\circled1). According to the results of the fixation ability of heavy metals(Pb$^{2+}$, Cu$^{2+}$, Cd$^{2+}$, Zn$^{2+}$) with soil and additives, authors can conclude that the higher pH condition had the more removal efficiency of heavy metals. B\circled1 and cement had especially high removal efficiency of heavy metals in a whole pH because of high alkalinity.alinity.

• Archives of Plastic Surgery
• /
• v.39 no.1
• /
• pp.59-62
• /
• 2012

Sweet's syndrome is characterized by clinical symptoms, physical features, and pathologic findings which include fever, neutrophilia, tender erythematous skin lesions, and a diffuse infiltrate of mature neutrophils. This is a report of our experience of Sweet's syndrome with parotitis. A 57-year-old man initially presented with tender swelling on the right cheek similar to parotitis. His symptoms relapsed despite the use of an oral antibiotic agent for 3 weeks. He additionally presented with erythematous papules and plaques on the periocular area and dorsum of both hands. Histiopathologic findings on punch biopsy of the right dorsum of the hand showed superficial perivenular histiocytic infiltration without vasculitis. We confirmed this as histiocytoid Sweet's syndrome and used systemic corticosteroid. After initiation of treatment with systemic corticosteroids, there was a prompt recovery from both the dermatosis-releated symptoms and skin lesions. Sweet's syndrome should be considered in patients with therapy-refractory parotitis and unclear infiltrated nodules. We present a confusing case who initially appeared to have parotitis but turned out to have histiocytoid Sweet's syndrome.

• Journal of Korea Association of Health Promotion
• /
• v.2 no.2
• /
• pp.154-159
• /
• 2004

Rheumatoid arthritis(RA) is the most common inflammatory joint disease and a major cause of disability, morbidity, and mortality. It occurs worldwide, affecting approximately one percent of adults. Inflammation of the synovial membrane surrounding a joint leads to swollen, tender, and stiff joints RA has no known cure and the diagnosis is made based on clinical criteria and many different options exist for treatment. All of these factors magnify the importance of the patient-physician interaction and place a premium on the art rather than the science of medicine. The major goals of therapy for RA are to relive pain, swelling, and fatigue; improve joint function; stop joint daage, and prevent disability and disease-related morbidity. Some combination of nonsteroidal anti-inflammatory drugs(NSAIDs), steroids, and DMARDs is necessary in almost patients. In many combinations of different DMARDs or DMARDs plus biologicals are necessary for optimal control. Additionaly, all patients with RA should be educated about their disease and the therapies that will be used. Patient education is essentially early in the disease course and on going basis Much research is focused on the further development of biological agent for treatment of RA. Elucidation of the trigger or trigers for RA may allow us to begin to think about prevention of RA.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.133-147
• /
• 2005

In order to investigate applicability for 2,2,2-trifluoroethyl methacrylate (TFEMA) produced by esterification of 2,2,2-trifluoroethanol(TFEA) and methacrylic acid(MA) using pervaporation membrane, poly(vinyl alcohol) (PVA) composite membranes were prepared with glutaraldehyde(GA) onto porous polyethersulfone(PES) support. The degree of crosslinking and thickness of PVA coating layer were analyzed by swelling test and SEM(scanning electron microscopy), respectively. Pervaporation test was done with two feed mixures; TFEA/water, MA/water. The pervaporation data were obtained as a function of content of crosslinking agent, feed composition, and operating temperature, respectively. In case of TFEA-water(90/10 wt%) feed mixture at $80^{\circ}C$, the optimized membrane showed the high permeation flux of 1.5 $kg/m^2hr$ and separation factor of 320. In case of MA-water(90/10 wt%) feed mixture, the membranealso showed high permeation flux of 2.3 $kg/m^2hr$ and separation factor of 740 in same conditions.

• Journal of Microbiology
• /
• v.33 no.4
• /
• pp.295-301
• /
• 1995

An antifungal Pseudomonas stutzeri YPL-1 produced extracellular chitinase and .betha.-1, 3-glucanase that were key enzymes in the decomposition of fungal hyphal walls. These lytic extracellular enzymes markedly inhibited mycelial growth of the phytopathogenic fungus Fusarium solani. A chitinase from P. stutzeri YPL-1 inhibited fungal mycelial growth by 87%, whereas a .betha.-1, 3-glucanase from the bacterium inhibited growth by 53%. Furthermore, co-operative action of the enzymes synergistically inhibited 95% of the fungal growth. The lytic enzymes caused absnormal swelling and retreating on the fungal hyphal walls in a dual cultures. Scanning electron microscopy clearly showed hyphal degradation of F. solani in the regions interacting with P. stutzeri YPL-1. In an in vivo pot test, P. stutzeri YPL-1 proved to have biocontrol ability as a powerful agent in controlling plant disease. Planting of kidney bean (Phaseolus vulgaris L.) seedlings with the bacterial suspension in F. solani-infested soil significantly suppressed the development of fusarial root-rot. The characteristics of a crude preparation of .betha.-1, 3-glucanase produced from P. stutzeri YPL-1 were investigated. The bacterium detected after 2 hr of incubation. The enzyme had optimum temperature and pH of 40.deg.C and pH 5.5, respectively. The enzyme was stable in the pH range of 4.5 to 7.0 and at temperatures below 40.deg.C, with a half-life of 40 min at 60.deg.C.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.352-359
• /
• 2004

Membrane technology was used for the optical resolution of the various racemic compounds such as tryptophan, tyrosine and phenylalanine, using enantioselective membranes prepared from sodium alginate (SA) and glutaraldehyde as a membrane material and crosslinking agent, respectively, The chemical structure of the membranes was characterized with FT-IR spectrophotometry and 3D molecular structure modeling study was done to figure out the optical resolution mechanism through the membrane. Effects of degree of crosslinking, feed concentration, operating pressure and different kinds of feed solution on the membrane performances were studied. As results, it was found that with increasing degree of crosslinking and membrane thickness, and decrease in the concentration of the feed solution and smaller size of solutes, the enantinselectivity of the membrane was improved. When the sodium alginate membranes with 80% of swelling index and 79${\mu}{\textrm}{m}$ of thickness were used, 77% of enantiomeric excess was obtained.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.20-20
• /
• 2022

Herein, we demonstrate that butein (1) can prevent swelling in a murine lymphedema model by suppressing tumor necrosis factor α (TNF-α) production. Butein derivatives were synthesized and evaluated to identify compounds with in vitro anti-inflammatory activity. Among them, 20 µM of compounds 7j, 7m, and 14a showed 50% suppression of TNF-α production in mouse peritoneal macrophages after lipopolysaccharide stimulation. Compound 14a, exhibited the strongest potency with an in vitro IC₅₀ of 14.6 µM and suppressed limb volume by 70% in a murine lymphedema model. The prodrug strategy enabled a six-fold increase in kinetic solubility of compound 1 and five-fold higher levels of active metabolite in the blood for compound 14a via oral administration in the pharmacokinetics study. We suggest that the compound 14a could be developed as a potential therapeutic agent targeting anti-inflammatory activity to alleviate lymphedema progression.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.45-53
• /
• 2011

The effect of the silane coupling agent, bis(triethoxysilypropyl)tetrasulfide (TESPT), on mechanical properties of a silica-filled NBR compound for oilseal was investigated. Curing behavior and crosslinking density of the compounds were measured using ODR (oscillating disk rheometer) and swelling ratio in toluene. UTM (universal testing machine) and shore A hardness tester were used in order to study the characteristics of mechanical properties of original vulcanizates and aged ones with heated air and ASTM No. 3. oil. Recovery of elasticity which influences the performance and service life of oilseal was investigated by giving bending deformation to vulcanizates in aging condition. After bending aging test, recovery distance was measured and calculated angle of recovery from it. TR (temperature retraction) test was performed on these vulcanizates to determine the low temperature recovery behavior. Wear resistance was measured by Taber type abrasion tester. In addition, SEM was used to characterize the morphology of the worn surface of vulcanizates. The result showed that addition of TESPT into silica-filled compound improves not only compound flow-ability, interaction between NBR and silica and crosslinking density, but also hardness, 100% modulus, recovery of elasticity, wear resistance, heat resistance and ASTM No.3 oil resistance of vulcanizates.