• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.115-116
• /
• 2000

Influence of sustain pulse-width on electro-luminous efficiency is experimentally investigated for surface discharge of AC-PDP. It is found that the firing voltage is decreased as the pulse-width is increased from $2\;{\mu}s$ to $8\;{\mu}s$ with sweeping frequency range of 10 kHz to 50 kHz. It has been found that the optimal sustain pulse-width is in the range of $3{\sim}4\;{\mu}s$ under driving frequency range of 30 kHz and 50 kHz, based on observations of memory coefficient, wall charge, and wall voltage as well as luminous efficiency.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.265-277
• /
• 1998

본 논문에서는 실내에서의 다중경로파에 의한 페이딩 경감 효과 및 고속전송의 가능성을 조사하기 위해 LOS(Line-of-Sight)영역에서 주파수소인법에 의한 광대역 신호를 측정 해석하였다. 측정에는 수직편파, 수평편파 및 원형편파의 무지향성 안테나를 사용하여 각각의 페이딩 정감효과와 광대역 신호에 대한 대역내 진폭편차특성을 비교 검토하였다. 그 결과 가시거리환경에서 원영편파틀 사용하면 기수회 반사에 의한 다중경로파를 억제 수신할 수가 있어서, 주파수 대역내의 광대역의 진폭 변동특성을 크게 개선할 수 있음올 알게 되었디. 또한 다이버 시티 방식은 송신측에 원형편파를, 수신측에는 수식 및 수평편파 안테나를 설치하여 편파다이버시티 수선을 행하는 것이 가장 효과적인 방법임을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제15권3호
• /
• pp.160-178
• /
• 1983

TRIGA Mark-III 원자로에서 핵연료봉의 내부 온도를 측정함으로써 노심의 출력분포를 유추하는 방법을 개발하였다. 핵연료 온도는 원자로의 안선 운전을 위하여 이미 장전되어 있는 계측 연료봉의 위치를 이동시켜 가면서 측정하였고 측정한 연료공의 수는 16개이다. 실험결과를 중성자확산이론에 의거한 노심계산의 결과와 비교한 바 최대편차는 12%, 표준편차는 5%였다. 핵연로 온도를 이용하여 연료봉의 출력밀도를 유추하는 방법은 기존의 다른 방법보다 훨씬 편리하면서 정확성을 유지할 수 있음이 판명되었다.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.221-230
• /
• 2000

스위프 기하학적 모델은 곡선, 면 또는 입방체를 주어진 경로를 따라 이동시킴으로써 기하학적 모델을 생성하는 기법이다. 따라서 스위핑을 사용하면 프리즘 쉘의 곡면을 쉽게 정의할 수 있다. 본 논문은 스위프 기하학적 모델을 프리즘 쉘의 최적화에 적용하는 절차에 대하여 기술하였다. 제시한 스위프 기하학적 모델을 유한요소법과 융합하였고 프리즘 쉘의 반응을 계산하기 위해 9절점 퇴화쉘요소를 채용하였다. 본 연구에서 제시한 최적화과정을 증명하기 위하여 수치예제를 풀어 보았다. 수치예제를 통하여 제시한 스위프 기하학적 모델이 많은 종류의 프리즘 쉘을 최적화하는데 효율적이고 신뢰적인 방법인 것으로 나타났다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.58-63
• /
• 2006

When the costal zone surrounded by a breakwater has a narrow vertical opening, currents in the vicinity of a narrow entrance can result in a jet flow, coinciding with the tide. Such a Tidal-Jet Generator(TJG) can change the water mass distribution and transport processes in the domain of influence of the jet. Also, it can decrease the residual time of them. In the present study, the water purification utilizing tidal jets in the coastal zone over constant bathymetry are estimated numerically, using a finite-difference numerical scheme, named the NS-MAC-TIDE method, which isbased on the fully 3D Navier-stokes(NS) equations. The shear velocity near the inlet of the TJG are predicted from the flow field simulation, and are assessed qualitatively with the development of scouring or sediment that is caused by the change of diffusion or sweeping flowup from the seabed of sediment particles. Finally, through solving a transport equation of concentration, the residual time related on mass transport processes and the flushing mechanism for water purification are investigated.

• BMB Reports
• /
• 제51권1호
• /
• pp.1-2
• /
• 2018

Positive selection on a new beneficial mutation generates a characteristic pattern of DNA sequence polymorphism when it reaches an intermediate allele frequency. On genome sequences of African Drosophila melanogaster, we detected such signatures of selection at 37 candidate loci and identified "sweeping haplotypes (SHs)" that are increasing or have increased rapidly in frequency due to hitchhiking. Based on geographic distribution of SH frequencies, we could infer whether selective sweeps occurred starting from de novo beneficial mutants under simple constant selective pressure. Single SHs were identified at more than half of loci. However, at many other loci, we observed multiple independent SHs, implying soft selective sweeps due to a high beneficial mutation rate or parallel evolution across space. Interestingly, SH frequencies were intermediate across multiple populations at about a quarter of the loci despite relatively low migration rates inferred between African populations. This invokes a certain form of frequency-dependent selection such as heterozygote advantage. At one locus, we observed a complex pattern of multiple independent that was compatible with recurrent frequency-dependent positive selection on new variants. In conclusion, genomic patterns of positive selection are very diverse, with equal contributions of hard and soft sweeps and a surprisingly large proportion of frequency-dependent selection in D. melanogaster populations.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.57-64
• /
• 2000

In order to regulate cutting torque in milling, monitoring system should be set to a certain threshold. Radial immersion ratio is an important factor to determine the threshold and should be estimated in process for automatic regulation. In this paper, on-line estimation of the radial immersion ratio using spindle motor current in face milling is presented. When a tooth finishes sweeping, a sudden drop of cutting torque occurs. This torque drop is equal to the cutting torque acting on a single tooth at the swept angle of cut and can be acquired from cutting torque signals. Average cutting torque per revolution can also be calculated from cutting torque signals. The ratio of cutting torque acting on a single tooth at the swept angle of cut to the average cutting torque per revolution is a function of the swept angle of cut and the number of teeth. Using the magnitude of this ratio, the radial immersion ratio is estimated. Identical algorithm is adopted to estimate the immersion ratio based on the spindle motor current measurement. The experiments performed under different cutting conditions show that the radial immersion ratio can be estimated within 10% error range by the proposed method using spindle motor current. Varying immersion ratio is also estimated well using the presented algorithm.

• 한국동물학회지
• /
• 제4권1호
• /
• pp.29-31
• /
• 1961

At the altitude of approximately 250 of Mt. Sori located in Kyung-gi Co, Korea authers have made a field collection of Drosophila during June, 1 and 15, 1961, and found about 30 specimens which seemed to be a new species belonging to Genus Drosophila, Subgenus Hirtodrosophila. AUthors have named the species : D. macromaculata sp. nov. " Its Korean name is given , : Uluck-muni-chopari". This species is very similar to Drosophila cheda in its external feature and especially it that each of four stripes in the mesonotum is cut into tow, and it also resembles with Drosophila calloptera in that it has three distinct spots in the wing. Its first segment of abdomen is yellow-brown in color while both end points are black. The second segment is black and in its middle part there yellow-brownish strips of V form, the peripheral part of which are found two spots of yellow brownish color. On third to fifth segments of male and on third to sixth segments of female there are fod-form spots, one on each segment, and on both sides of these rods two smaller spots are found in each segment. This species is clearly a fungus feeder and its breeding in authers laboratory is at present, not attained. Holotype : male , Kwang-nung, Kyung -gi Do, South Korea, 1 Male June, 1, 1961. Allotype : female, collected together with holotype. Paratype : Kwang-nung, Male 16 and female 12. Distribution : South Korea. Collecting method : Net sweeping on the decayed trees.yed trees.

• International Journal of Railway
• /
• 제3권3호
• /
• pp.83-89
• /
• 2010

This paper attempts to extract the fundamental dynamic properties, i.e. natural frequencies, damping ratios of the 48 m-long, $20^{\circ}$ skewed real bridge with PSC girders wrapped by a steel plate. The forced vibration test is achieved by mounting 12 Hz-capacity of artificial oscillator on the top of bridge deck. The acceleration histories at the 9 different locations of deck surface are recorded using accelerometors. From this full-scaled vibration test, the two possible resonance frequencies are detected at 2.38 Hz and 9.86 Hz of the skewed bridge deck by sweeping a beating frequency up to 12 Hz. The absolute acceleration/energy exhibits much higher in case of higher-order twist mode, 9.86 Hz due to the skewness of bridge deck which leads asymmetric situation of vibration. This implies the test bridge is under swinging vertically in fundamental flexure mode while the bridge is also flickered up and down laterally at 9.86 Hz. This is probably by asymmetric geometry of skewed deck. A detailed 3D beam-shell bridge models using finite elements are performed under a series of train loads for modal dynamic analyses. Thereby, the effect of skewness is examined to clarify the lateral flickering caused by asymmetrical geometry of bridge deck.