• 인터넷정보학회논문지
• /
• 제16권2호
• /
• pp.27-40
• /
• 2015

방화벽 정책 추론은 사전지식 없이 특정 네트워크로의 능동적 탐지기법을 이용한 응답 패킷 분석으로 방화벽 정책을 발견한다. 하지만, 외부에서 특정 네트워크로 추론 패킷을 어떻게 전송하는가에 따라 방화벽에 설정된 공격 탐지 임계값에 의해 네트워크 공격으로 탐지되기 때문에 무분별하게 패킷을 전송하는 방법은 유효하지 않다. 본 논문에서는 방화벽의 공격 탐지 임계값을 고려하여 네트워크 공격으로 탐지되지 않는 범위 내에서 추론 변수를 활용한 패킷 전송 알고리즘을 제안한다. 그리고 제안하는 알고리즘에의해 전송되는 패킷이 네트워크 공격으로 탐지되는가를 검증한다. 마지막으로 우리는 실제 방화벽 정책과 추론된 정책을 비교하여 제안된 알고리즘의 정확성을 검증한 결과를 제시한다.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.190-199
• /
• 1999

Presented in this paper is an algorithm for finding all intersections among polygonal chains with an O((n+k)·log m) worst-case time complexity, where n is the number of lien segments in the polygonal chains, k is the number of intersections, and m is the number of monotone chains. The proposed algorithm is based on the sweep line algorithm. Unlike the previous polygonal-chain intersection algorithms that are designed to handle special only cases, such as convex polygons or C-oriented polygons, the proposed algorithm can handle arbitrarily shaped polygonal chains having self-intersections and singularities (tangential contact, multiple intersections). The algorithms has been implemented and applied to 1) testing simplicity of a polygon, 2) finding intersections among polygons and 3) offsetting planar point-sequence curves.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2002

It is necessary to develope a high frequency diode laser sensor system based on the absorption spectroscopy for the measurement of temperature of the spray flame. DFB diode laser operating near $2.0{\mu}m$ was used to scan over selected $H_2O$ transitions near $1.9{\mu}m\;and\;2.2{\mu}m$, respectively. The measurement sensitivity at wide range of sweep frequency was evaluated using multi-pass cell containing $CO_2$ gas. This diode laser absorption sensor with high temporal resolution up to 10kHz was applied to measure the gas temperature in the spray flame region of liquid-gas 2-phase counter flow flame. The successful demonstration of time series temperature measurement in the spray flame gives us motivation of trying to establish non-intrusive temperature measurement method in the practical spray flame.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1040-1044
• /
• 1999

A micro porous PTFE membrane desolvator (MMD) was built and evaluated for the on-line removal of organic solvents to facilitate the determination of trace metal contaminants in the solvents by ICP-AES. Three organic solvents, isopropyl alcohol (IPA), methanol, and dimethy sulfoxide (DMSO) were studied. The MMD reduced organic solvent concentration in the sample aerosol stream by 82% to 89%, as indicated by monitoring C(I) emission. Net signal intensity of Fe, Al, and Cu was increasing with higher organic solvent concentration, with the rate of increase being solvent dependent. The signal intensities for Mg and Pb followed the trend with the C(I) signal. Changing the sweep gas flow rate affected the optimum signal intensity. Wine samples were analyzed by the method of standard addition. The concentrations of B, Al, and Mg were determined with a relative precision of less than 2.3%.

• 정보과학회 논문지
• /
• 제43권1호
• /
• pp.40-46
• /
• 2016

도로지도 생성은 인공위성 촬영이나 현장실사를 기반으로 한다. 그리하여 도로지도를 생성하고 수정하는데 많은 시간과 비용이 든다. 이러한 이유로 차량 GPS 데이터를 이용해 도로지도를 생성하는 연구가 활발히 진행되고 있다. 도로지도 생성 연구에서 가장 중요한 문제는 주도로와 같은 대표궤적을 추출하는 것이다. 대표궤적 추출을 수행할 때에는 시작과 끝이 비슷한 궤적데이터들의 집합을 전제로 하여 궤적을 추출한다. 따라서 대표궤적을 추출하기에 앞서 전처리 과정으로 궤적 클러스터링 작업이 필요하다. 본 논문에서는 이러한 문제를 해결하기 위해 하나의 영역을 일정한 격자로 분할하고, Sweep Line 알고리즘을 응용해 유사궤적들을 탐색한다. 마지막으로 프레쉐거리를 이용하여 궤적 간 유사도를 계산하였다. 실제로 서울의 강남구 지역에 있는 500대의 차량 GPS 궤적을 가지고 클러스터링 작업을 수행하였다. 또한, 실험을 통하여 격자분할 접근방식의 빠른 수행시간과 안정성을 보였다.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• 한국가시화정보학회지
• /
• 제14권3호
• /
• pp.28-31
• /
• 2016

In this study, we investigate the wake characteristics in two cases which are laminar inflow and turbulent inflow. To solve the flow with wind turbines and its wake, we use large eddy simulation (LES) technique with actuator line method (ALM) and turbulent inflow of Turbsim. Turbulent inflow which contains the characteristic of the stable atmospheric boundary layer is used. We perform the quantitative analysis of velocity deficit and turbulence intensity in two cases. Time series of velocity deficit at the first, the second column in two cases are compared to observe the performance of wind turbine. The performance in the first column in laminar inflow is overestimated compared to that in turbulent inflow. And we observe that wake in the case with turbulent inflow drive to the span-wise direction and wake recovery in turbulent inflow is more effective. In quadrant analysis of Reynolds stress, the ejection and the sweep motion in turbulent inflow case are bigger than those in laminar inflow case.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1190-1196
• /
• 2014

본 논문은 넓은 고도 범위와 낮은 측정 오차를 갖는 주파수 변조 연속파(FMCW) 레이더 고도계의 설계 방안을 제안한다. 측정 고도의 동적 범위를 줄이기 위해 전파 고도계의 송신 경로에 광 지연선을 적용하여 넓은 고도 범위를 얻을 수 있다. 송신 전력과 수신단 이득을 제어하여 또한 수신 전력의 동적 범위를 줄일 수 있다. 더불어, 직접 디지털 합성기를 사용하여 변조 선형성을 향상시키고, 기준 클럭 신호를 위상 고정 루프의 옵셋(offset) 주파수로 사용하여 위상잡음을 최소화함으로써 낮은 고도 측정오차를 갖는다.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.48-52
• /
• 2010

In this paper, we introduce a new path planning algorithm which combines the merits of a visibility graph algorithm and an adaptive cell decomposition. We quantize a given map with empty cells, blocked cells, and mixed cells, then find the optimal path on the quantized map using a visibility graph algorithm. For reducing the number of the quantized cells we use the quad-tree technique which is used in an adaptive cell decomposition, and for improving the performance of the visibility checking in making a visibility graph we propose a new visibility checking method which uses the property of the quad-tree instead of the well-known rotational sweep-line algorithm. For the more efficient visibility checking, we propose two additional improvements for our suggested method. Both of them are used for reducing the visited cells in the quad-tree. The experiments for a performance comparison of our algorithm with other well-known algorithms show that our proposed method is superior to others.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 춘계학술발표논문집 (하)
• /
• pp.1595-1598
• /
• 2003

이 논문은 질의와 검색 대상 객체가 모두 이동 객체인 경우, 즉 3 차원 폴리라인(polyline) 형태의 경로를 가지는 객체들 간의 연속(continuous) 최근접 질의 처리에 유용한 기법을 제안한다. 질의경로를 따라 객체를 탐색해가면서 질의에 대한 최근접 정보가 변하는 시점을 찾는 것이 목적인 연속 최근접 질의 처리는 전체 질의 경로에 올바른 최근접 정보 리스트를 제공하지만, 기존의 방법들은 검색 대상 객체가 동적인 경우에 적용되기에는 시간에 따라 움직이는 객체의 위치변화를 처리하지 못하고, 질의 시점과 대상 객체간의 시점을 연관시키기 어렵다는 문제점들을 가지고 있다. 따라서 이 논문에서는 데이터 객체들의 궤적 정보는 STR 트리로 유지하고, 질의 경로 세그먼트와 질의의 시간 인터벌에 포함되는 데이터 객체 세그먼트 모두에 대해 추출시간(sampling time) 선택, 스윕라인(sweep line) 적용, 위치 추정 함수 이용 등의 단계를 처리함으로써, 이 문제를 해결하고 질의 경로 전체에 정확한 최근접 객체 정보 리스트를 제공한다. 제안된 기법은 물류정보시스템, 국방정보시스템, 기상, 교통 등 시공간 이동 객체의 질의를 다루는 시스템에 적용할 수 있다.