• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.311-317
• /
• 2020

Performance of Sustainable materials continues through using of recycled waste construction materials to minimize the utilization of the natural resources. The cement industry is a major source of CO₂ in the atmosphere which is the main cause of global warming. Replacement of OPC with other sustainable cementitious materials has been the most interesting area of researches. This investigation focuses on the properties of alkali-activated mortar with the different replacement ratios of ceramic tile powder (CTP) by fine soil powder (FSP) (0 to 100)% and different molarities of sodium hydroxide concentrations. The experimental program was conducted by examining the compressive strength, water absorption, and water sorptivity. The results showed that the compressive strength of the specimens at age of (28, 56, and 90 days) increases with an increase in the amount of fine soil powder content and decreases at the age of 120 days. Also, minimum water absorption at the age of 90 days was found in the mixes containing 100% fine soil powder. However, fine soil powder replacement had a negative effect on the sorptivity and water absorption values at the age of 120 days. On the other hand, the 12M sodium hydroxide concentration was considered the optimum concentration compared to other concentrations.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.7-14
• /
• 2019

Purpose: The purpose of this research is to find out week and strong aspects in LEED categories based on achieved scores earned by LEED-HC(Healthcare) v.2009. Methods: The LEED-HC scorecards of 88 healthcare projects are analyzed. The analysis are focused on relationship between achieved scores, LEED categories and achieved levels. This relationship was presented by graphs and charts. Results: 1) Compare to LEED-NC, in LEED-HC, sub-categories related to public health are added. The scores are added in Energy Atmosphere and Indoor Environmental Quality. 2) Achieve scores in Sustainable Site are high and one in Energy Atmosphere and Indoor Environmental Quality are low at all levels. 3) Scores which was lost in Energy Atmosphere are recovered in Material Resource and Sustainable Site in order to keep its level. 4) Since most of scores in Energy Atmosphere are under EAc1 Optimize energy performance sub-categories, it is important to achieve more score in Optimize Energy Performance Sub-Categories to gain a higher level. Even if LEED-HC has more score in Energy Atmosphere, this is a hard to achieve scores in that categories. It is important to review Energy Atmosphere categories and its points for improvement. Implications: This study will provide basic database in order to establish Korean green building rating system for hospital.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.135-136
• /
• 2021

This study investigated the use of different amounts of eggshell powder (ESP), namely 5%, 10%, and 15% by weight, as a substitute for Ordinary Portland Cement. The results show that its flowability and 28-day compressive strength. Meanwhile the carbon dioxide emission was though sustainable assessment analyzed It was concluded that ESP replacement level of around 5% provides the best performance to reduces environmental pollution.

• Korea Journal of Hospital Management
• /
• v.20 no.4
• /
• pp.62-71
• /
• 2015

The purpose of this study is to investigate the intra CSR for the sustainable hospital management. The company was proactive stance on CSR carried out in the environmental field as a preemptive countermeasures movement of citizens and government regulations. CSR, while performing for employees, is recognized as a problem within the enterprise, it was reluctant to respond to the performance and results published. This study aims to determine whether the effect is substantially reflect If you want to include in the process of demonstrating the impact of CSR within the organization to make decisions in labor union composed of employees of internal stakeholders as a parameter. In particular, research in the field of performing a public function such situations, hospitals are lacking. Internal CSR performance of the general hospital (professional) in this study was found to have mad that the generally positive effect on improving labor productivity within the organization. In particular, its performance was more positive than in the virtuous cycle that meets the expectations and internal performance improvements improve equity executives expect employees to be borne if your blood and your liver collaborative decision-making behavior. Therefore, the internal CSR awareness by investing in sustainable management of the partnership is expected to achieve improved financial performance and labor productivity by performing more active at the same time.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.3
• /
• pp.271-295
• /
• 2016

In this study, an extensive literature review has been conducted on the material characterization of UHPC and its potential for large-scale field applicability. The successful production of ultra-high performance concrete (UHPC) depends on its material ingredients and mixture proportioning, which leads to denser and relatively more homogenous particle packing. A database was compiled from various research and field studies around the world on the mechanical and durability performance of UHPC. It is shown that UHPC provides a viable and long-term solution for improved sustainable construction owing to its ultrahigh strength properties, improved fatigue behavior and very low porosity, leading to excellent resistance against aggressive environments. The literature review revealed that the curing regimes and fiber dosage are the main factors that control the mechanical and durability properties of UHPC. Currently, the applications of UHPC in construction are very limited due to its higher initial cost, lack of contractor experience and the absence of widely accepted design provisions. However, sustained research progress in producing UHPC using locally available materials under normal curing conditions should reduce its material cost. Current challenges regarding the implementation of UHPC in full-scale structures are highlighted. This study strives to assist engineers, consultants, contractors and other construction industry stakeholders to better understand the unique characteristics and capabilities of UHPC, which should demystify this resilient and sustainable construction material.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.5
• /
• pp.440-449
• /
• 2013

We consider a reverse supply chain with a production facility and a recovery facility, and address the joint control of production and disposal decisions for sustainable operations. Demands are satisfied from on-hand inventory of serviceable products, replenished via manufacturing or remanufacturing. Sold products may be returned after usage and each returned product is disposed of or accepted for recovery. Accepted returned products are converted into serviceable products after remanufacturing process. Formulating the model as a Markov decision process, we characterized the structure of the optimal production and disposal policy as two monotone switching curves under a special condition. Three types of heuristic policies are presented and their performance is numerically compared.

• Asia pacific journal of information systems
• /
• v.10 no.1
• /
• pp.107-122
• /
• 2000

The resource-based theory addresses a new way of competition and the sustainability of advantages from competition, Moreover, Information Technology(IT) has interacted with other resources and gained the strategic importance. The central research task is to identify three relationships; (1) between organizational resources surrounding IT and IT performances, (2) between organizational resources surrounding IT and sustainable competitive advantages(SCA), and (3) between IT performances and the SCA. Results of the LISREL analysis show that firms must integrate IT into the other related resources of the organization and the management should consider comprehensive change management efforts rather than mere investments in technology to gain sustainable competitive advantages.

• Journal of Applied Reliability
• /
• v.9 no.4
• /
• pp.343-349
• /
• 2009

One of the recent hot issues in the manufacturing business is how to incorporate environmental attributes into product and process design. Design for environment considers the potential environmental impact of a product throughout its life-cycle. In the case of something breaks, it can become waste immediately, hence reliability and durability is the essential part of product design. This paper presents reliability technology for sustainable product design to improve the product longevity that extends performance life, serviceability and durability. The presented method will help to develop a sound design and avoid weak links to minimize the waste.

• International Journal of High-Rise Buildings
• /
• v.10 no.3
• /
• pp.179-191
• /
• 2021

Tall buildings have generally been developed as solo towers. With the increase of the heights of tall buildings from about 10-story buildings to supertall and megatall buildings, their structural systems have evolved from interior structures to exterior structures and combined/mixed systems. This paper reviews structural systems developed for solo supertall and megatall buildings and discusses the challenges they face in terms of structural performance and architectural design as the building heights are ever increased. As a viable and more sustainable design alternative to extremely tall solo towers, superframed conjoined towers are presented. Their structural performances are investigated in comparison with solo tower structures. Further, architectural potentials of superframed conjoined towers are explored through design studies.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.2
• /
• pp.133-145
• /
• 2017

Palm oil production is among the highest worldwide, and it has been mainly used in the food industry and other commodities. Currently, a lot of palm oil production has been destined for the synthesis of biodiesel; however, its use in applications other than the food industry has been questioned. Thereby for a sustainable development, in this paper the use of palm oil of low quality for corrosion inhibitors synthesis is proposed. The performance of the synthesized inhibitors was evaluated by using electrochemical techniques such as open circuit potential measurements, linear polarization resistance and electrochemical impedance spectroscopy. The results indicate that the fatty amides from palm oil are excellent corrosion inhibitors with protection efficiencies greater than 98%. Fatty amides molecules act as cathodic inhibitors decreasing the anodic dissolution of iron. When fatty amides are added, a rapid decrease in the corrosion rate occurs due to the rapid formation of a molecular film onto carbon steel surface. During the adsorption process of the inhibitor a self-organization of the hydrocarbon chains takes place forming a tightly packed hydrophobic film. These results demonstrate that the use of palm oil for the production of green inhibitors promises to be an excellent alternative for a sustainable use of the palm oil production.